HANASS MX100029 Flush Mount Ceiling Light Instruction Manual
- May 15, 2024
- HANASS
Table of Contents
HANASS MX100029 Flush Mount Ceiling Light
CATION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.
WARNING – If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions,contact a qualified electrical
contractor.
WARNING – This product contains chemicals known to the State of
California to cause cancer, birth defects, and/or other reproductive harm,
Thoroughly wash hands after installing. handling. cleaning or otherwise
touching this product.
CAUTION – All glass is fragile, use care when hands glass component(s)
and or lamp(s),Installation has to be made by a qualified/registered
electrician. Customer Service
email:[email protected]
PENDANT LIGHT, ITEM NO.: MX100029
Accessories
-
Body
-
Hardware Tube
-
Glass
-
Mounting Screws
-
Wire Nuts
-
Mounting Unit
-
Cap Nuts
Overview
STEP 1
Use the mounting screws to attach the mounting unir to the junction box
STEP 2
Wiring Diagram
STEP 3
Place the canopy over the mounting unit and secure the fixture with the cap
nuts.
STEP 4
Install bulb (not included)
