VORSPRUNG YUE2000 Portable Power Station User Manual

VORSPRUNG YUE2000 Portable Power Station

Specifications

Product Details

LCD Display

1. Abnormal temperature sign
2. Low-temperature sign
3. Fan status
4. Overheating sign
5. Remaining capacity
6. Percent of remaining capacity
7. Fast charge indication
8. WIFI connection
9. Status of WIFI connection
10. Charge/discharge time indication
11. Remaining time
12. Overload indication
13. Output frequency
14. USB-A output status
15. TYPE-C output status
16. 12VDC output status
17. 24VDC output status
18. UPS function
19. LED illumination
20. Output power
21. Input power

Method of parallel connection

• When used in parallel, the products must be turned off before this operation can be performed.
• The connecting cable should be connected correctly, and the positive pole should be connected to the positive pole, and the negative pole should be connected to the negative pole, so as not to cause damage to the machine.
• Do not move or directly disconnect the product when the product is being charged or discharged. If you need to disconnect or connect, turn off the product and then operate it.
• Do not touch or insert metal objects into the parallel metal port. If there is a stain on the metal port, please wipe it with a dry cloth.

Product Instructions

UPS function

• To start the UPS function, you need to turn off the power of the product first, connect it to the grid power, press and hold the grid power switch for 3 seconds, and after it is turned on, short press the AC switch.
• The icon is as shown in the figure, the UPS function can be turned on, it can be charged and discharged at the same time, it supports the priority of the mains, and has the function of UPS uninterrupted power supply.

USB output

• After ensuring the normal boot, short press the USB output power switch, as shown in the figure, and the function icon will be displayed, before using the USB output port; short press the USB output power switchagain to turn it off.

DC output

• After ensuring the normal boot, short press the DC output power switch, as shown in the figure, the function icon will be displayed, and then theDC output port can be used.
• Short press the DC output power switch again to turn it off. This product supports dual output, 12V and 24V two ports supportoutput at the same time, but not input.

LED function

• After ensuring that the power is turned on normally, press and hold the LED power switch for 3 seconds, as shown in the figure, to display the function icon, each short press the LED switch will switch to different modes (low light, high light, SOS, fast flashing), short press the LED again The switch can be turned off.

AC output

• After ensuring the normal power-on, short press the AC output power switch, as shown in the figure, the function icon will be displayed, and then the AC output port can be used, and the frequency will automatically switch with the mains voltage.
• Short press the AC output power switch again to turn it off.

How to charge

• The product has a charging protection function. Please use according to the normal charging opera After the product is fully charged, it will automatically stop charging.
• To avoid other it is recommended that the charging connection be disconnected in time after the product is fully charged.
• The product is designed with a variety of charging methods and multiple charging interfaces, which are compatible with automobiles, solar panels, and grid power. After any charging method is activated, the battery level indicator icon will flash.

Charge through grid power

• Insert the output terminal of the power cord into the AC port (built-in charging power management, the maximum input power of the port is 1000W), the power icon scrolls, and the remaining time for full charging is displayed at the same time.

Solar charge

• Connect the unfolded solar panel MCA socket (built-in MPT charging management, the maximum input power of the interface is 800W), and then connect to the DC interface, the power icon scrolls, and the remaining time for full charging is displayed at the same time; the power of the solar panel is greatly affected by the light, and the power generation if there are changes, the remaining time will change dynamically, which is normal.

Car charge

• Start the car, insert one end of the accessory “car charging cable” into the car cigarette lighter, and the other end into the DC interface, the battery icon scrolls, and the remaining time for full charging is displayed at the same time.

Overload protector

• Remove the over-power device and restart it to restore (the electrical appliance must be used within the rated power)

Errors

• This product is a portable energy storage power supply, not a toy, please do not have children play with it.
• Please read the product manual care before use.
• If it needs to be stored for a long time (more than one month), please charge the product to about 70%of the power.
• it is recommended to empty the product first and re-charge it fully before use again.
• Do not charge, use, or place the product near a fire or overheating.
• Products and accessories are subject to adjustment without notice.

Cautions and warnings

• Please read the precautions carefully, which are divided into Danger”, “Warning” and “Caution” levels
• Danger” level has the possibility of causing personal injury or death
• Warning” level has the possibility of causing dangerous situations to happen.
• CAUTION” could cause the result of product damage or shorten the life cycle.
• The product contains output high-voltage alternating current, please do not insert your hands or metal conductors into the AC socket.
• Non-professionals should not disassemble the product without permission to avoid dangerous things such as electric shock and short circuits.
• Do not place the product in a high-temperature environment (> 50 °C) or near a fire source
• The product is not a toy, please do not let children play with it.
• Do not use it in a wet environment. Do not knock or bump the product
• Please read the specific battery charger manual before use.
• It is strictly forbidden to disassemble the product.
• It is strictly forbidden to use products with obvious damage.
• Please use the original adapter to charge or an adapter that meets the electrical parameters specified by the manufacturer.
• Please select the solar panel according to the electrical parameters specified by the manufacturer.
• It is forbidden to charge with solar panels higher than 25V.
• This product is a power supply, please select the corresponding model according to the electrical equipment, and prohibit the use of this product with excessive power and load.
• Do not short-circuit the product output.
• This product is pre-set according to the voltage standards of different countries. Before purchasing and using it, please consult the dealer or use it according to the product instruction manual.
• When the power of the product is exhausted, please charge it in time.

Accessories

After-sale service Warranty Guidelines:

• If the product fails, please operate it according to the instructions. If the failure cannot be eliminated, please contact the after-sales service personnel of our company.
• Please provide the following information when contacting the after-sales service personnel: product model, date of purchase, contact number, detailed address, and product failure description.
• Please cooperate with and answer the detailed inquiries of our company’s after-sales service engineers, including on-site conditions, fault performance status, frequent/occasional accidents, and whether there are errors in operating procedures, etc., so that our company’s after-sales engineers can find the reasons and then reply (or guide) users how to solve product failures.
• If you still cannot solve the problem, please contact your dealer.

The warranty period is 12 months from the date of sale:

• During the warranty period, the company will provide free maintenance and replacement parts for defects in material and workmanship and damage caused by non-human reasons, and the parts replaced belong to our company;
• During the warranty period, the following situations cannot enjoy free maintenance services;
• Disassemble product without a permit;
• The damage to the surface coating and appearance is not covered by the warranty;
• The user does not use it according to the instructions;
• The failure or damage caused by accident, human, environmental, and other factors (operation error, collision, unreasonable voltage, moisture, etc.);
• Packaging and product accessories are not covered by the warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>