globe GE50573L Smart Power Strip User Guide
- May 15, 2024
- globe
Table of Contents
Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.
SMART POWER STRIP
SAVE THESE INSTRUCTIONS
CAUTION: This power strip has a 1 year manufacturer warranty from date of
purchase. If the power strip fails within that time, please contact our
customer care team, or visit our website to submit a warranty request. This
warranty is void if the product is misused in any way. This replacement is the
only option available and liability for incidental or consequential damages
are expressly excluded. Please see remaining CAUTION text for proper use.
For use only in 125V/60HZ circuits. Risk of electrical shock. Do not open, no
user-serviceable parts inside. This device is not intended for use with
emergency exit fixtures or emergency exit lignts, photocells and electronic
timers. This device is intended for indoor use or weather protected fixtures.
Do not use where directly exposed to water. Minimum operating temperature is 0
°C (32 F).
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator and your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC RESPONSIBLE PARTY
Globe Electric
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com
Globe Suite™ Guide
Scan with your mobile device
FEATURES
- Automate your power strip through the Globe Suite™ app with Routines (see page 3 for details).
- Control your smart power strip with the free Globe Suite™ app, or through a voice assistant.
- Create smart scenes with other Globe smart products to automate your home. Visit our website for more details: globe-electric.com/smart
SPECIFICATIONS
| 15A MAX | 60 Hz |
|---|---|
| 1875 W | 125 VAC |
| 300 joules | 4ft fabric cord |
| Type 3 SPD VPR 700V(L-N) Blue indicator light | SPT-3 14 gauge |
CONNECTING INSTRUCTIONS
-
Download the Globe Suite™ app
Make sure your mobile device is running iOS 9.0/watchOS 2.0/Android™ 4.4 or higher.
• Download the Globe Suite™ app from the iOS or Android store.
• Use your email to create an account and log in. -
Set your smart power strip in pairing mode
• Insert your power strip into the desired outlet.
• The blue indicator light on the power strip should be blinking rapidly.
• If it does not, turn the power strip off, on, off, on and wait for the LED indicator light to be blinking rapidly. -
Connect to the Globe Suite™ app
On your mobile device, please ensure all requested permissions are enabled: Wi-Fi, Bluetooth, Location Services.
• Select the “+” icon in the top right of the Globe Suite™ app home screen.
• If the LED indicator light is flashing rapidly, the “scan” mode will detect your power strip within a few seconds. When discovered, select the power strip, and tap on “Next.”
• Enter your Wi-Fi credentials correctly.
-
Your smart power strip Is ready!
• Name your device and choose which room to place it in.
• You can now control your smart power strip directly from the Globe Suite™ app.
• Still need help? Select the “How do I set device into pairing mode” link on the “scan” page and follow the in-app instructions or view the video.
• Or check out the QR code for a short instructional video (see page 1). -
Set up voice assistance
• Onthe home screen, select “Profile,” and select “Integration.” Choose your voice assistant and follow the instructions within the app.
• Create Siri Shortcuts (for iOS)
– On the home screen, select “Smart Scenes,” then select the “+” icon to add a Trigger Scene.
– Once completed, select “Add to Siri” and add the phrase to Siri Shortcuts.
– Please note that the exact phrase must be said to execute the Trigger Scene with Siri.
CONTROLLING THE POWER STRIP THROUGH THE APP
BASIC CONTROL
Power
Turn your power strip on or off directly.
ROUTINES
Timer
Set a countdown for your power strip to turn on or off once the timer runs
out.
Cycle
Schedule on and off cycles for your smart power strip for a set amount of
time.
Auto-off
Automate your power strip to turn off after a set amount of time after each
use and never worry about forgetting to turn off an appliance.
Vacation
Schedule your device to automatically turn on and off to give the
appearance someone is home while you are away.
Add a new schedule
Set a time and date for your power strip to either turn on or off to create
additional routines that fit your specific needs.
Scan the OR codes for a mere in-depth loak af how the features work.
HARDWARE SETTINGS
Restart status
Set the default state of the power strip when reconnected to a power
source. Choose from Off, On, or Last status.
Light mode
Turn the blue indicator light on the physical device on or off.
GLOBE SUITE™ APP FEATURES
Device offline notification
Select to receive a notification if your power strip goes offline.
Device sharing
Share access to your connected device with another Globe Suite™ app user.
Device grouping
Group multiple Globe Suite™ smart power strips together to control them in
unison, rather than individually.
Add to home screen
Create a widget on your phone and/or tablet’s home screen for easy access to
the power strip.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS. RISK OF ELECTRIC
SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAPS OR AN EXTENSION CORD.
USE ONLY IN DRY LOCATION.
CAUTION:
Do not install this device if there is not at least 10 meters (30 feet) or
more of wire between the electrical outlet and the electrical service panel.
This device features an internal protection that will disconnect the surge
protective component but will maintain power to the load – now unprotected. If
this situation is undesirable for the application, follow the manufacturer’s
instructions for replacing the device.
CAUTION: For Household Use Only.
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to
offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388
(North America Only) / Toll Free Fax:
1-800-668-4562 (North America Only)
E-Mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
150 Oneida, Montreal, QUebec, Canada HIR1A8
Please visit our website to discover other quality Globe products:
http://www.globe-electric.com
Documents / Resources
|
globe GE50573L Smart Power
Strip
[pdf] User Guide
GE50573L, 2AQUQGE50573L, GE50573L Smart Power Strip, Smart Power Strip, Power
Strip, Strip
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>