HG Power HI-200RC Inline Duct Fans User Manual
- May 15, 2024
- HG POWER
Table of Contents
Mixed Flow In-Line Duct Fan
INSTRUCTONS Inline Duct
Fans
Multi-Language User Manual
Installation Steps
-
Fix the Support
-
Connect the Ducts
-
Place the Motor Body
-
Connect the Power
Note: The exact installation steps may vary with the different models.
DOS
-
Easy Installation:
Two tools needed (Screwdriver + Cable Stripper) -
Must-Have Accessories:
Duting Pipes & Duct Clamps (Check the size before purchase) -
Wiring Correct:
Brown for the fire wire
Blue for the neutral wire
Yellow/Green for the grounding -
Easy Cleaning:
Please clean the machine after a long time using to keep the device working longer.
DONTS
- Do NOT replace the range hood (Can be use as a combination)
- Do NOT work 24 hours continously all the time
- Do NOT place the machine close to the fire or high temperature
- Do NOT expose the machine over the sunlight
Q&A
1. Q: Can I use the fan with stepless controller?
A: HF-P/HF-S/GF/HA Series can not. HF-PE Series included the controller.
2. Q: How do I install the smart fan by myself?
A: The smart fan included two models. Wired: Just connect the fan power and run the fan by controller Wireless: Separately connect the power of fan body & controller, then click the button to run the fan.
3. Q: How can I choose the fan model according to my room?
A: First, Measure the size of your ducting pipe, then match it rightly; Second, Measure your room square and calculate the CFMs; Third, Compare the fan model CFMs.
4. Q: Why the noise I measured myself is higher than your statement?
A: Our products are tested by the engineer in the vacuum laboratory which are different with the normal enviroment test. And we usually recommend use with ducting pipe to reduce noise.
5. Q: Can I dismantle the fan parts to repair it by myself?
A: We do not recommend the customer repair it by oneself. You can consult the exact question with our customer service.
6. Q: Can I install two or more fans in my house? How it works?
A: Yes, you can. You can check the product page or consult the electricians.
7. Q: How long is warranty?
A: 12-month quality warranty after purchase.
8. Q: Whast’ the IP rating of product and normal working enviroment?
A: IP44 rating. Operating temperature range: -20~60℃.
Panel Description:
- Power Button: Turn on / off controller by manual
- Delay Button: Short press to display delay time, press again to increase 1 minute by every click (Max. 20 Min). Zero the delay time by long press the key
- Set Button: Short press to set time of timer function, long press to turn on / off the timer function
- Up: Increase the wind speed under power on mode
- Down: Decrease the wind speed under power on mode
- Temperature Display: Indoor temperature & set-temperature display
- Temperature Unit: ‘C/’F
- Timer on symbol
- Timer off symbol
- Delay Shut-down Time Display: Timing zone display
- Delay Symbol
- Indoor Temp. Delay Function Shut-down Symbol
- Ventilation Symbol
- Speed Symbol
Controllers
1. Controller for Wired Smart Inline Duct Fan
(We have 3-type of controllers for the different models)
2. Controller for Wireless Smart Inline Duct Fan
Button and Display Thermostat Buttons and Switches
-
Mode:
operating mode: automatic/manual switch -
SET:
Press SET button to enter SETTING MODE.
Can set delay time after power off, humidity, Voc value and temperature -
UP:
Adjust parameters up under SET mode. -
DOWN:
Adjust parameters down under SET mode. -
Power button: On/Off
Display Description
The Display
- Auto mode
- Manual mode
- VOC value
- Show humidity value
- Communication error alarm
- Show room temperature
- Fan fault alarm
- Show time delay
- Show speed mode
Installation
3. Controller for Wireless Dual-Speed Inline Duct Fan
Warranty
Thanks for purchaing our inline duct fans. We promised the highly quality of
our products that it has 12-month warranty.
Any questions please freely contact us.
We also has below products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>