COSTWAY MU10090 Electronic Piano Instruction Manual

COSTWAY MU10090 Electronic Piano

Specifications

• Product Name: Electronic Piano
• Model Number: MU10090
• Charging Time: Approximately 4 hours
• Power Adapter: 5V/2A
• Interface: TYPE-C for charging/MIDI, USB, MIC, MP3, SUS
• Functions: Volume adjustment, Start/Stop, Tone, Rhythm, Demo, Record/Play, Metronome, Keyboard light switch, Tempo, Pitch, Split, Chord, Learn, Sustain, Vibrato, Drum kit, Velocity, Low voltage display, Bluetooth connection

Product Usage Instructions

Charging:
Please charge the electronic piano before use. Follow these steps for charging:

1. Connect the provided TYPE-C charging cable to the interface on the piano.
2. Use a power adapter with specifications 5V/2A.
3. The charging indicator will be red while charging and turn green when fully charged.
4. For the first charge, ensure to charge for more than 6 hours.

Low Voltage Prompt:
If the low voltage symbol flashes on the display screen (indicating battery voltage below 3.6V), charge the piano immediately. The system will automatically go to sleep if not in use for ten minutes.

Panel Functions
The panel includes functions such as volume adjustment, Start/Stop, Tone selection, Rhythm selection, Demo playback, Record/Play feature, Metronome control, and more. Refer to the manual for detailed instructions on each function.

Volume Adjustment
Rotate the encoder left and right to adjust the volume. The default volume at startup is 12 (range from 00-16).

Start/Stop:
To start or stop rhythm playing mode, gently press the encoder. Use the encoder to select rhythm numbers and names displayed on the screen. Press the encoder to stop rhythm and demo music playback.

FAQ

• Q: What should I do if the low voltage symbol is flashing on the display?
  A: Charge the electronic piano immediately using the provided charging cable and a 5V/2A power adapter.

• Q: How can I adjust the volume on the electronic piano?
  A: Rotate the encoder left and right to adjust the volume. The default volume at startup is 12.

Before You Start

Please read all instructions carefully and keep it for future reference.

Warning

Attention: Children should use this product under the parental supervision.
Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.

WARNING:
CHOKING HAZARD
-Small parts.
Not for children under 3 years.

General Warnings

• The product must be installed and used under the supervision of an adult.
• Read through each step carefully and follow the proper order.
• Remove all packaging, separate and count all parts and hardware.
• Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Ensure a secure surface during installation, and always place the product on a flat, steady and stable surface.

Panel Function Diagram

Please charge before use
Charging indicator:

1. TYPE-C interface
2. It is not applicable to PD fast charging line
3. The charging indicator is red and turns green when it is full
4. Battery: charging time is about 4H, please charge it more than 6H for the first time
5. Power adapter: 5V/2A

Low voltage prompt:
When the lithium battery voltage is too low (below 3.6V), the symbol of low voltage is constantly flashing on the display screen. Please charge it in time.
If you do not play the piano for ten minutes, the system will automatically go to sleep.

Interface

• SUS : Sustain pedal MP3 : MP3
• MIC : Microphone
• : Headphone / Speaker
• USB : TYPE-C charging / MIDI interface

Function:

Volume adjustment, Start and stop, Tone, Rhythm, Demo, Record/play, Metronome, Keyboard light (LED) switch, Tempo, Pitch, Split, Chord, Learn, Sustain, Vibrato, Drum kit, Velocity, low voltage display, Bluetooth connection.

• Volume
  Rotate the encoder left and right to adjust the volume, the default boot volume is 12 (from 00-16).

• Start/Stop
  Press the encoder gently to enter the rhythm playing mode. Rotate the encoder left and right to select the rhythm from 000 to 127 (see attached rhythm table).
  The sequence number and rhythm name will be displayed on the screen. When turning on the rhythm and demo music, gently press the encoder to stop the rhythm and demo music.

• Tone
  Press and hold the tone button and rotate the encoder from left to right to select the tone from 000 to 127 (see the attached tone table). The serial number and the name of the adjusted tone will be displayed on the screen. After releasing the tone key, return to the initial interface and rotate the encoder to adjust the volume.

Demo

1. Short press the demo button to play the demo. Press the demo button again to stop the playback.
   During the playback of the demo and after stopping the playback, rotate the encoder left and right to select the demo from 000-020.

2. Press and hold the demo button and rotate the encoder from left to right to select the demo from 000-020 (see the attached demo table).
   Note : Only choose not to play the demo, the serial number and the demo name of the adjustment will be displayed on the screen.
   At this point, after releasing the demo button, and press the encoder twice, return to the initial interface and rotate the encoder to adjust the volume.

Record/ Play (Long press to Record, and short press to Play)

1. Press and hold the Record/ Play button and then RECODE ON will appear on the screen. At this time, press the Record button on the keyboard panel to record MIDI signals.
2. Then press the Record/ Play button, and the display screen will display REC Play ON, that is, the last recorded signal can be played.
   After the playback, go back to the initial interface and rotate the encoder left and right to adjust the volume.

Tone & Demo Selection

1. During the playback of the Demo and after stopping the playback, rotate the encoder left and right to select the Demo.
2. Press the Demo button on the keyboard panel and rotate the encoder from left to right to select the Demo. Note: Only choose not to play the Demo.
3. During the playback of the Tone and after stopping the playback, rotate the encoder left and right to select the Tone.

Metronome & Keyboard light (LED)

1. Press the metronome button and the metronome will display the beat selection of 1/4, 2/4, 3/4 and 4/4.
2. Long press the metronome button, and the keyboard light will turn on or off.
   The display screen will display LED ON or LED OFF.
   Note : This feature requires the purchase of a piano with a keyboard light.

Feature selection

1. Long press the encoder switch and rotate the encoder selection function (TEMPO, PITCH, SPLIT, CHORD, LEARN, SUSTAIN, VIBRATO, DRUM KIT, and VELOCITY).

2. After the selection, gently press the switch to select the function to be changed, such as TEMPO.
   At this point the rotary encoder changes the TEMPO value.

3. After changing the function, gently press the switch or long press the switch to return to the previous function selection interface, and rotate the encoder selection function (TEMPO, etc.).
   Press the switch again and return to the initial interface. Rotate the encoder left and right to adjust the volume.

4. Double click the switch in any state to return to the initial interface, and rotate the encoder left and right to adjust the volume.

TEMPO

1. Long press the encoder switch and rotate the encoder to select the TEMPO.
2. Gently press the switch, then rotate the encoder left and right. The PITCH can be selected from 40 to 280, and the default is 120.

PITCH

1. Long press the encoder switch and rotate the encoder to select the PITCH.
2. Gently press the switch, then rotate the encoder from left to right. The PITCH can be selected from -6 to +6, and the default is +0.

SPLIT

1. Long press the encoder switch and rotate the encoder to select the SPLIT.
2. Gently press the switch, and then rotate the encoder around, you can choose whether the SPLIT is on or off.

This function can divide the 88 keys into two vocal ranges for playing.
Before the split, the left keyboard is A1-B4 , and A2-B5 after the split.
Before the split, the right keyboard is C5-C9, and C3-C7 after the split.
When the split function is turned on, the host part can be used as a separate 44-key keyboard (the secondary part does not need to be connected). When connected to the secondary part, it is a complete 88-key electric piano.

CHORD

1. Long press the encoder switch and rotate the encoder to select CHORD.
2. Press the switch gently and rotate the encoder from left to right to select SINGLE, FINGERS and OFF.

During the playing of rhythm, the system enters the chord mode. Chord function: Press the key in the area A1~F4# to play the chords that match the rhythm, and the tone of the chords changes with the pitch of the harp.

LEARN

1. Long press the encoder switch and rotate the encoder to choose LEARN.
2. Gently press the switch, then rotate the encoder left and right to choose the teaching mode (teaching A, teaching B, and OFF).

Teaching A: Select different demo music and short press the Demo button to enter the teaching mode. Playing any key can play the main melody of the demo song, The keyboard lights turn on and off with the main melody.
Teaching B: Select different demo music and short press the Demo button to enter the teaching mode. The keyboard will light with the main melody, the user press the right keys, light the next note of the lamp;
If the user does not press the right keys, they pause until they press the right keys to light the next note.

SUSTAIN

1. Long press the encoder switch and rotate the encoder to choose SUSTAIN.
2. Gently press the switch, then rotate the encoder left and right to choose whether the sustain is on or off.

Turn on the sustain function, and make the tone produce the effect of continuance in performance.

VIBRATO

1. Long press the encoder switch and rotate the encoder to select VIBRATO
2. Gently press the switch, then rotate the encoder left and right to choose whether the vibrato is on or off.

Turn on the vibrato function to produce the tremolo effect in the performance.

DRUM KIT

1. Long press the encoder switch and rotate the encoder to select DRUM KIT
2. Gently press the switch, then rotate the encoder left and right to choose whether the drum kit is on or off.

When the drum kit is on, all the keys are turned on to become the percussion tone, and when the drum kit is off, the percussion tone is turned off.

VELOCITY

1. Long press the encoder switch and rotate the encoder to select VELOCITY.
2. Gently press the switch, then rotate the encoder left and right to choose whether the velocity is on or off.

When the velocity is on, press the key with greater force and the sound will be louder.
The default strength is on.

Sleep Switch:
Long press the encoder switch, rotate the encoder to choose the sleep switch.
The default mode is sleep mode on. In the default mode, when the piano is not played after 10 minutes, the electric piano will be turned off.
If you are in sleep mode off, it will always be on.

DEMO

• Castle in the Sky
  1. Song of Joy
  2. Little Stars
  3. By Alice
  4. Dancing Girl
  5. Deskmate
  6. Ten Years
  7. Colourful Clouds Chasing The Moon
  8. In My Song
  9. CrystlLake
  10. Green Sleeves
  11. Milk Song
  12. A comme amour
  13. Les premiers sourires de Vanessa
  14. Snowdreams
  15. Bandari
  16. Edelweiss
  17. Dance of fireflie
  18. My soul
  19. Ballade pour Adeline
  20. CSIKOS POST

Bluetooth APP functions:
iPhone connection: POPiano connection:

1. Search and download POPiano APP from App store of the iPhone.
2. Open the POPiano App after turning on the bluetooth of the iPhone, select any song, and choose to start playing after entering.
3. Click on the upper right of the iPhone screen , and then you can  choose: connect to the piano through: BlueTooth – Confirmed, next – confirm to connect to the piano.
4. After confirming bluetooth connection, the icon is displayed as blue check mark .

GarageBand connection:

1. Open GarageBand App.
2. Turn on bluetooth on your phone.
3. Open GarageBand App and click the Settings icon in the upper right corner of the screen.
4. Connect the piano’s bluetooth through the: Song Settings – Advanced – Bluetooth MIDI Devices.

Perfect Piano and PianoBar connection:

1. Download the Perfect Piano App and PianoBar.
2. Turn on bluetooth on your phone.
3. First connect the GarageBand App. When the Garage Band App is successfully connected to your bluetooth, then open the Perfect Piano App and PianoBar can be used directly.

Android phone connection:

POPiano connection:

1. Search and download POPiano APP from App store of the mobile phone.
2. Turn on the bluetooth function, some phones need to turn on the phone location function.
3. Open the POPiano App to select any song, and choose to start playing after entering.
4. Click on the upper right of the mobile phone screen , and then you can choose: connect to the piano through: BlueTooth – Confirmed, next – confirm to connect to the piano.
5. After confirming bluetooth connection, the icon is displayed as blue check mark .

The following batteries or accumulators are contained in this electronic device

• Warning: Make sure the battery is fully discharged.
• Open the case of the electronic piano, find the battery, first unplug the connector that connects the battery cable to the motherboard, and then gently peel the battery from the adhesive.
• Carefully remove the battery or accumulator. (The battery is glued to the inner case with double-sided tape). The battery must not be removed by non-professionals.
• The battery or accumulator and the device can now be disposed of separately.

Tone Table

Rhythm Table

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>