spatex AP200-V2 Air Blower 200W Instruction Manual

spatex AP200-V2 Air Blower 200W

Specifications:

Products Performance:

• Power Supply : 220-240V/50Hz/60Hz or 110-120V/50Hz/60Hz
• Insulation class: F
• Thermal protector: VDE or UL approval
• Noise Level : 72dB

Parts And Materials:

• Pump casing : High temperature resistant reinforced plastic
• Air switch: 15A, 250V (Optional)
• Carbon brush: Using import materials

Product Usage Instructions

Installation:

1. Check valve
2. Air Blower
3. Loose union (refer to Fig.1)
4. Draining valve
5. Air-distributing pipe

Installation Structure:

D H2 H H1 A L1 L2 L

Technical Parameter List:

CAUTION:

• The air blower pump must be grounded to prevent electrical shock.
• The air blower pump outlet should not be blocked during operation.
• Monitor airflow to prevent overheating.
• Cut off power before maintenance checks.
• Installation and maintenance should be done by qualified personnel.

FAQ

• Q: Can the air blower be used with a different power supply?
  • A: The air blower is designed for either 220-240V/50Hz/60Hz or 110-120V/50Hz/60Hz power supplies.

Products Performance

• 220-240V/50Hz/60Hz or 110-120V/50Hz/60Hz
• Insulation class F
• Thermal protector of VDE or UL approval
• Noise : Air blower with nozzle 72dB.
• There is fuse inside the motor

Parts And Materials:

• Pump casing : high temperature resistant reinforced plastic
• Air switch :15A,250V(Optional)
• Carbon brush : using import materials

Using and Installing:

• The number of nozzles installed should be more than the number of regulation minimum.
• There should be at least 10mm of space around the air blower for good ventilation.
• The installation of the check valve must be higher than the using level in case water comes. into the air blower pump.( Fig.1 )
• The connecting pipe of air blower pump must use a resist heat pipe.
• Air blower pump must be installed and fixed, and the connecting pipe must be fastened, in a horizontal position. Use a screw  to fix the air blower on the bathtub mounting plate

WARNING

• As to maintain the IP rating, the blower must be mounted horizontally.
• The blower shall be installed by license.
• This means that disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• Parts containing live parts must be inaccessible to persons in the spa.
• Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into the bath or spa.
• The appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
• Parts should be installed in the correct zone and that equipotential bonding should be carried out.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This air blower is only intended for fixed spa.
• Not for transportation spa/ portable spa, swimming pool.
• The earthing of the air blower must be permanently connected to fixed wiring.
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
• Contact your local government for information regarding the collection systems available.
• If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Installation Structure

1. D in fig.is the thread connection that union of Φ32andΦ 33.5 available
2. D in Fig.is a direct connection that haveΦ 32; Φ33.5 andΦ 48 available.

Technical parameter list

Configurations table

CAUTION

• Air blower pump must be grounded in order to prevent electrical shock or injury, by a Licensed Electrician.
• The outlet of air blower pump can not be Blocked up when it is operating. When the outlet air flow is too small, the air temperature will increase, pay attention to prevent scald.
• The power must be cut off before checking the air blower pump.
• This air blower must only be installed by the many-facturer, its service agent or similarly qualified persons according to the wiring rules. The cleaning and maintenance also.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>