Beca BAC-7000 Smart Knob Thermostat User Guide
- June 13, 2024
- BECA
Table of Contents
BAC-7000 Smart Knob Thermostat
User Guide
BAC-7000 Smart Knob Thermostat
New heating thermostat with knob BAC-7000 Six characteristics on the design
- 1.32 inch circular and 240*240 TFT shows your artistic taste.
- Superfine aluminum side knob lets your fingers feel delicate.
- Above 6H tempered glass keeps your screen away from scratches.
- Agile push button gives you an excellent experience.
- Seven colors ambient light increase color to your life.
- Variety brushed back panel options are suitable for different home styles.
ABOUT YOUR THERMOSTATS
The BAC-7000 range has been developed to control electric underfloor, water
heating or water/ gas boiler systems. These units are designed for use in
commercial, industrial, civil and domestic properties
MODEL DEFINITION
A: Two pipe; Control Fan Coil Unit and Two Wired Motorized Valve
E: Four pipe; Control Fan Coil Unit and Two Wired Heat Valve and Two Wired
Cool Valve.
W : Wifi connection
In the box you will find
| Thermostat | 1pc |
|---|---|
| User Guide | 1pc |
| QC Passed | 1pc |
| Screws | 2pc |
| Wall plate | 1pc |
TECHNICAL DATA
Power Supply: 95 ~240 VAC, 50~60Hz or 24V DC/AC, 50~60Hz
Please check the information laser printed on the back of the thermostat for
the actual voltage.
Fan Relay Amps Resistance: 5A; Inductive: 3A
Valve Relay Amps Resistance: 3A; Inductive: 1A
Sensor: NTC3950, 10K
Set Temp. Range: 5 -35 ℃
Accuracy: ±0.5 ℃
Dispaly Temp. Range: 5 ~ 99℃
Ambient Temp.:0~45 ℃
Ambient Humidity: 5 ~ 95 % RH (Non Condensing)
Storage Temp.:0~ 45℃ Timing Error: < 1%
Power Consumption: <1.5W
Shell Material: PC +ABS ( Fireproof)
Installation Box: 86 * 86mm Square or European 60mm Round
BoxWire Terminals: Wire 2 X 1.5 mm² or 1 x2.5 mm²
Protection Class: IP20
Buttons: Capactive Touch Buttons
DIMENSION: (mm)
BEFORE WIRING AND INSTALLING
- Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
- Check the rathings given in the instructions and on the product to make sure the product is suitable for your application.
- Installer must be a trained, experienced service technician.
- After installation is complete, check out product operation as provided in these instructions.
WIRING
Please check the information laser printed on the back of the thermostat for
the actual voltage.
INSTALLATION
Your thermostat is suitable for istallation within a standard 86mm pattress
box or European 60mm pattress box.
Step 1. Keep power off. See Fig 1.
Step 2. Remove the mounting plate by pushing the display assembly. See Fig 2.
Step 3. Connect power supply, load into the appropriate terminals. (see
“Wiring your thermostat” for details).
Step 4. Fix the mounting plate into the wall with screws inthe box(Fig 4).
Step 5. Fix the thermostat body and the mounting plate by the lower button(Fig
5).
Step 6. Installation complete(Fig 6).
CAUTION
Electrical Shock or Equipment Damage
Hazard. Can shock individuals orshort equipment circuitry.
Disconnect power supply before installation.
HOME SCREEN QUICK REFERENCE
Note: The weather and humidity will be synchronized within 1 hour after
the device is connected to the Internet for the first time, and the weather
will be synchronized every hour thereafter.
Main control interface
Tip: Press the screen to enter the Main control interface.
OPERATION
During Power On
-
Press the home screen to enter the control interface.
-
Rotate the control interface to select
-
Press the control interface to confirm
-
Long press the control interface to return the home screen
-
Power
ON: The thermostat is controlling the heating device.
OFF: The thermostat stops controlling the heating device. -
Clock
Clock setting, the wifi version will automatically synchronize the local time after networking. -
Brightness
Standby screen brightness setting. When it is set to 0, the screen will be off after 10s of no operation without displaying anything, and the screen will be woken up by rotating the knob. -
WiFi
ON: The thermostat is in the wifi distribution network state.
OFF: The thermostat is not in the wifi distribution network state. -
Fan speed
Auto: After selecting Auto , the main screen displays the .
Low: After selecting Low , the main screen displays the .
Med: After selecting Med , the main screen displays the .
High: After selecting High, the main screen displays the . -
System mode
Heating: After selecting Heating , the main screen displays the .
Cooling: After selecting Cooling , the main screen displays the .
Ventilation: After selecting Ventilation , the main screen displays the .
In the mode of Ventilation, the valve is off but the fan runs. -
Mode
Manual Mode
Programming mode (Schedule mode.) -
Set temp.
Set temperature range 5-35°C
Set week program on your App
Default settings for program schedule
Time display| WEEKDAY (MONDAY-FRIDAY)
(1 2 3 4 5 shows on screen)| WEEKEND (SATURDAY)
(6 shows on screen)| WEEKEND (SUNDAY)
(7 shows on screen)
---|---|---|---
TIME| TEMPERATURE| TIME| TEMPERATURE| TIME|
TEMPERATURE
Period 1| 6:00| 20 °C| 6:00| 20 °C| 6:00| 20 °C
Period 2| 8:00| 15 °C| 8:00| 20 °C| 8:00| 20 °C
Period 3| 11:30| 15 °C| 11:30| 20 °C| 11:30| 20 °C
Period 4| 13:30| 15 °C| 13:30| 20 °C| 13:30| 20 °C
Period 5 (1 +2)| 17:00| 22 °C| 17:00| 20 °C| 17:00| 20 °C
Period 6 (3+4)| 22:00| 15 °C| 22:00| 15 °C| 22:00| 15 °C j
A separate schedule may be set for weekdays (Mon – Fri) and for weekends (Sat or Sun).
ABOUT WIFI
WI-FI CONNECTION
Before using your Wi-Fi thermostat for the first time,you must configure the
Wi-Fi signal and settings through your smartphone or tablet ,This will allow
communication between your connected devices
Step 1 Downlosd your APP （Fig1-1）
|
---|---
http://app.yimusmart.com/smartlife| http://app.yimusmart.com/smartlife
Search for “Smartlife” in Apple Store or Google Play or use a browser to scan
the QR code above (Figure 1-2), and complete account registration and
installation according to the guidance of the APP.
Step 2. Connect the thermostat
Method 1: Bluetooth network distribution (Fig 2.1-Fig 2.4), turn on the
Bluetooth switch of the mobile phone and set the thermostat to the WiFi
enabled state, see the following tutorial to complete the connection and
settings.
Method 2: Scan the QR code to configure the network guide (Fig 2.5-Fig 2.9) complete the connection and setup
Scan this QR code
https://smartapp.tuya.com/s/p?p=N8bUqOZ8HBQjU0K0&v=1.0
Method 3: Ordinary distribution network guidance (Fig. 2. 5.1-Fig. 2.9)
APP operation interface description (heating thermostat)）
More settings
SIMPLE EXCEPTION HANDLING
| No. | Phenomenons | Handling |
|---|---|---|
| 1 | Power is on but without display. | *Check if the terminals between LCD panel |
and Power Unit Box is loosen.
2| Without output but display works.| Usea new LC panel or new Power Unit
Box toreplace the old one.
3| Room Temp. Is a lttle different from the actual.| Do temperature
calibration in item 1 of high senior options
SERVICE
Your thermostat carries an 24 months warranty from date of purchase. Service
outwith the warranty period mayincur a charge. More detail please contact with
us directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>