XLC BA-S45 Frame Bag User Manual

XLC BA-S45 Frame Bag

READ THIS FIRST

• Before continuing with the use of this product, it is important to understand the printing and fitting specifications to ensure proper assembly and use.

PRINTING AND FITTING SPECIFICATIONS

1. Print this document on A4 sheets of paper (21 x 29.7 cm).
2. Ensure you print at 100% scale.
3. Measure the arrow below to check scale is correct. The arrow should measure 10 cm / 3.9 in.
4. Fit the prints together following the numbering system on the edge of each sheet. Ensure crosses are aligned and overlapping.
5. Tape the sheets together and cut around the Frame Bag’s outline.
6. When fitting this printed template to your bike, keep in mind that the Frame Bag will be more flexible as it is built from fabric.

SCALE EXAMPLE OF FINAL TEMPLATE

• The image provides an overview of how the final template will look when assembled.
• It shows the placement of the pages and the corresponding parts of the frame bag (A1, A2, Z1, Z2).
• The pages are laid out around the silhouette of the frame bag, indicating where each page should be joined to form the complete template.

FAQ

• What scale should I print the template at?
• The template should be printed at 100% scale to ensure accurate sizing.
• How can I verify if I have printed the template at the correct scale?
• Measure the provided scale arrow; it should exactly measure 10 cm or 3.9 inches.
• What should I do if the pages do not line up correctly?
• Ensure that the crosses on the edges of each sheet are perfectly aligned and overlapping before taping them together.
• Can I expect the actual Frame Bag to have the same rigidity as the paper template?
• No, the Frame Bag will be more flexible as it is constructed from fabric.

PRINTING AND FITTING SPECIFICATIONS

• Print this document on A4 sheets of paper (21 x 29,7 cm).
• Ensure you print at 100% scale.
• Measure arrow below to check scale is correct.

• Fit the prints together following the numbering system on the edge of each sheet. Ensure crosses are aligned and overlapping.
• Tape the sheets together and cut around the Frame Bag’s outline.
• When fitting this printed template to your bike, keep in mind that the Frame Bag will be more flexible as it is biult from fabric.

PARTS DESCRIPTION

SCALE EXAMPLE OF FINAL TEMPLATE

OVERVIEW

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>