Rohnson R-5337 Blender Instruction Manual

Rohnson R-5337 Blender

Specifications:

• Model: Blender R-5337
• Speed Settings: 1 (Low), 2 (High), 0 (Stop), P (Pulse setting)
• Capacity: Glass jug
• Components: Measuring cap, Lid, Glass jug, Stirring blade base, Stirring cup base, Motor base, Speed control knob, Body

Product Usage Instructions

Before First Use:

Familiarize yourself with the components – Measuring cap, Lid, Glass jug, Stirring blade base, Stirring cup base, Motor base, Speed control knob, Body.

Instruction for Use:

• Speed Setting Use:
• 1 (Low): For light usage with liquids
• 2 (High): For foodstuffs
• 0: Stop operation
• P (Pulse setting): Short, powerful impulse movements
• Note: Operate the motor for a maximum of 2 minutes or alternate 2 minutes on and 2 minutes off to prevent overheating or damage.

Instruction for Cleaning:

1. Switch off the appliance and unplug it from the socket.
2. Wait until the blade has stopped running.
3. Turn the blender cup to loosen it counter-clockwise.
4. Clean the parts with warm water, washing-up liquid, and rinse under the tap.
5. Clean the motor unit with a damp cloth. Never immerse it in water.

FAQ

Q: How do I prevent overheating of the motor?

A: Operate the motor for a maximum of 2 minutes or alternate 2 minutes on and 2 minutes off to prevent overheating or consequent damage.

Q: How should I clean the appliance?

A: Clean the parts with warm water and washing-up liquid. Do not use abrasive cleaning agents, scourers, acetone, or alcohol. Clean the motor unit with a damp cloth.

Blender R-5337

Read these instructions for use carefully before using the appliance and save them for further reference.

IMPORTANT CAUTION

• Check if the voltage indicated on the base of the appliance corresponds to the local mains voltage before you connect the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use the appliance when the main cord, the plug, or other components are damaged.
• Make sure all parts are correctly mounted before you switch on the appliance.
• Never reach into the feeding tube with your fingers or an object while the appliance is running. Only the pusher is to be used for this purpose.
• Do not remove the pulp container when the appliance is in operation.
• Do not touch the small cutting blades in the blades in the base of the filter.
• Always unplug the appliance after use.
• If the supply cord is damaged, must be replaced by the manufacturer or its service agent or a similarly qualified person in order to order to avoid a hazard.
• The water temperature should not be over 60℃ when cleaning the unit.
• Do not run this unit long-time, otherwise the inner parts will be damaged.
• Do not put the whole or parts of the body into the water.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Do not use the appliance if the rotating sieve is damaged.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

GENERAL DESCRIPTION

1. Measuring cap
2. Lid
3. Glass jug
4. Stirring blade base
5. Stirring cup base
6. Motor base
7. Speed control knob
8. Body

BEFORE FIRST USE

• All parts of the blender are to be thoroughly cleaned before being used for the first time.
• Connect the device to the main supply.

INSTRUCTION FOR USE

• Check the switch knob on the”0” bit pointer position.
• Put the motor base, and turn the button clockwise
• Place the foodstuff you wish to process into the cup.
• Put the lid on the cup and close securely. Place the measuring cap into the hole in the lid.
• Switch on the motor base:

Speed setting Use

• 1 (Low) for light usage with liquids
• 2 (High) for more solid consistency – for mixing liquids and solid foodstuffs
• 0 stop operation
• P (Pulse setting) short, powerful impulse movements
• NB: Operate the motor for a maximum of 2 minutes or alternating 2 minutes on, then 2 minutes off to prevent overheating or consequent damage.

INSTRUCTION FOR CLEANING

• The appliance is easier to clean if you do so immediately after use.
• Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.

1. Switch the appliance off, remove the plug from the wall socket and wait until the blade has stopped running.
2. Turn the blender cup to loosen counter-clockwise.
3. Clean these parts with the cleaning brush in warm water with some washing-up liquid and rinse them under the tap.
4. Clean the motor unit with a damp cloth.
   Never immerse the motor unit in water nor rinse it under the tap.

Specifications

• Model: R-5337
• Rated Voltage: AC220-240V
• Rated Power: 1500W
• Rated Frequency: 50/60Hz

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

• At the end of its working life, the product must not be disposed of as urban waste.
• It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
• Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>