LOVESPEJO Bathroom Mirror with Lights 32×40 Front and Backlit Smart Mirror User Manual

May 15, 2024
LOVESPEJO

LOVESPEJO Bathroom Mirror with Lights 32×40 Front and Backlit Smart

Mirror

IMPORTANT SAFETY INSTRUCTION

When using an electrical furnishing, basic precautions should always be followed, including the following.

DANGER
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS MIRROR.

WARNING

  • To reduce the risk of burns,fire,electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening. Do not use outdoors.
  • An Electrical option cabinet must be wired to a 20 Amp protected circuit when used in bathrooms and all other locations required by the National Electric Code.

NOTICE: Follow all local building, electrical, and plumbing codes.

PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

SPECIFICATION

LOVESPEJO-Bathroom-Mirror-with-Lights-32x40-Front-and-Backlit-Smart-Mirror-
FIG- \(1\)

  • LED Bathroom Mirror
  • Main material:4mm tempered glass
  • Input: AC 100-120v 50-60HZ
  • 3 Color:Warm white, Neutral white,Cool white
  • Stepless dimming: Yes
  • Memory function: Yes
  • IP Rate: IP64
  • Installation:Vertical Wall Mounted

TOOLS REQUIRED

LOVESPEJO-Bathroom-Mirror-with-Lights-32x40-Front-and-Backlit-Smart-Mirror-
FIG- \(2\)

PARTS INCLUDED

LOVESPEJO-Bathroom-Mirror-with-Lights-32x40-Front-and-Backlit-Smart-Mirror-
FIG- \(3\)

ELECTRIC CONNECTIONS

ALL WIRING SHOULE BE DONE BY A QUALIFIED LICENCED ELECTRICIAN

WARNING
Shut off power before wiring the mirror.

WARNING
An Electrical option mirror must be wired to a 20 Amp GFI(Ground Fault Interrupter) pro tected circuit when used in bathrooms and all other locations required by the National Electric Code.

CAUTION
Requires 120 VAC 20 Amp GFI protected circuit.

The electric wire comes through the access hole in the back of the mirror.

Hard wired: Cut the plug so as to adopt hard wired connection.

INSTALLATION INSTRUCTIONS

  1. Locate the centerline and the height of the screws that to hang the mirror.LOVESPEJO-Bathroom-Mirror-with-Lights-32x40-Front-and-Backlit-Smart-Mirror-FIG- \(6\)
  2. Adopt the hanging template to locate the drilling holes, and use the level tool to make sure it is horizontally placed.

LOVESPEJO-Bathroom-Mirror-with-Lights-32x40-Front-and-Backlit-Smart-Mirror-
FIG- \(7\)

WARNING: Mounting bracket must be attached to furring strip/channel or wall stud.

OPERATION GUIDE

How to use this switch:

Tap the color temperature switch to select warm white, neutral white or cool white as you need.

  • Memory function saves the last color.
    • Tap the power switch to turn on/off the LED lights.
    • Long press the power switch to dim or brighten them.
  • Memory function saves your last brightness.

Tap the anti-fog switch to turn on/off the defogger function.
(White light: function on; No light: function off)

Maintenance:

  1. Make sure that LED lights are OFF before cleaning!
  2. Use a soft wet cloth to remove dirt and stains. Wipe with dry cloth afterwards.
  3. You can use a velvet cloth for better result in cleaning (velvet cloth not included)
  4. Do not use any abrasive material as it may damage the surface and finish of the mirror.
  5. A mild detergent may be used to clean the surface of the mirror.
  6. Spray detergent on the cloth instead of the surface of the mirror when cleaning.

Warranty Card

  • NAME
  • ADD
  • MODEL
  • DATE
  • TEL
  • ORDER NO
  • Failure Description

Feel free to contact us:
Email: beautymirror68@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals