GIGABYTE S25x S47x Cable Arm Installation Guide

Cable Arm
Installation Guide

S25x S47x Cable Arm

Before the installation, make sure the Cable Management Arm (CMA) installation direction and switch the CMA connector

1. Press Push Button.
2. Spin 180 degree to change the direction.

A : CMA connector
B : CMA connector based on inner member
C : CMA connector
D : CMA connector based on outer member
E : CMA connector beside the center CMA body
F : CMA connector base on outer member

CAUTION!
Loop strap must be tied to the CMA crossbar. This is transportation accessory. Remove the loop strap after the system arrives at the final destination.
Basket size:

Cable Management Arm Installation

1. Install the inner member. Install A to B .
2. Install the inner member. Install C to D.
3. Install the outer member Install E to F .

Cable Management Arm Removal

Release the outer member

1. Press the PUSH button on the CMA plug-in part to draw it out.

Release the outer member

1. Turn CMA 90 degree to the right hand side to maintain the chassis or resume the removal.
2. Press PUSH button on the CMA plug-in part to draw it out. or resume the removal.

Release the inner member

1. Press PUSH button on the CMA plug-in part to draw it out.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>