ENCLO EC18032 Belmont Freestanding Lattice Screen Instruction Manual

EC18032 Belmont Freestanding Lattice Screen

Belmont
Freestanding
Lattice Screen
W/ Planter Box
(45 1/2″H X 42″ W X 14 7/8″ L)

45 min
Approximate assembly time
Scan the QR code
for an assembly video

www.encloscreens.com

GENERAL INFORMATION

IMPORTANT

• A cordless drill with a Phillips head bit will be requried for the assembly of this product.
• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.

MISSING OR DAMAGED PARTS?

VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and handling of this product, occasionally problems occur. If you discover any missing, damaged or defective parts, please visit our website to order replacement parts. If you experience any further  trouble with your product, please contact our customer service department.
parts.nychbrands.com
support@encloscreens.com
704-892-5222 / 877-234-6196

Customer service agents are available to take calls weekdays from 9am- 5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number EC18032 and the specific part name which can be found on page 4. It is helpful if you can provide the batch lot which is a stamped number on the end of the box.

NEED ASSEMBLY HELP?
If you are having problems with the assembly or installation of this product, we are happy to assist you with the process, so please give us a call at 704-892-5222 / 877-234-6196.

NEED TO RETURN?
If for some reason you need to return this product, please allow us to help resolve your issues first. If you still decide to return the product, you will need to initiate the return from the company you originally purchased from.

Detailed Product Dimensions & Specifications

RECCOMENDED TOOLS

PRODUCT ASSEMBLY
RECCOMENDED TOOLS

SURFACE MOUNTED INSTALLATION (OPTIONAL)
Reccomended if installing into high wind environment
Surface mounting screws not included

STEP 1: LAY OUT MATERIALS

STEP 2: ASSEMBLE PLANTER BOX

STEP 3: ASSEMBLE LATTICE SECTION

STEP 3.1

1. Insert the Vertical Pickets (K) into the Bottom Rail (I) in the pattern shown.
2. Insert the shorter Horizontal Slat 2 (J) into the top routed picket holes.
   

STEP 3.2

1. Install the Arched Top Rail (H) over the vertical slats and horizontal slat 2.
2. Insert (6) horizontal slat 1 pieces into the routed holes in the vertical pickets.
   

STEP 4: INSTALL LATTICE SECTION

STEP 4.1

1. Slide (2) Spacers (M) into the inner post channels of the long posts as shown.
2. Slide the assembled lattice section into the inner post channels of the long posts.

STEP 4.2

1. Pre-drill holes for (6) screws in the locations shown, with the included 1/8″ drill bit (O).
2. Drive (6) 21/2″ self-drilling stainless steel screws into the back of the tall posts as shown below to secure the lattice section.
3. Remove spacers after screws have been installed.
   

STEP 5: INSERT POST CAPS

STEP 5.1
Fit (4) Post Caps (E) over the short and tall posts.
Note: If you would like to secure your post caps, apply a small amount of vinyl glue to the inside rim of the caps to fix them to the posts.

SURFACE MOUNTED INSTALLATION (OPTIONAL)
Recommended if installing into high wind environment
Surface mounting screws not included

Recommended if installing into high wind environment
STEP 6: DIRT INSTALLATION (OPTIONAL)

Recommended if installing into high wind environment
STEP 7: PATIO / DECK INSTALLATION (OPTIONAL)

www.encloscreens.com
support@encloscreens.com
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216

References

• Nych Parts
• Home | ENCLO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>