MAN AND MACHINE C Wireless Mouse User Manual

June 6, 2024
MAN AND MACHINE

MAN-AND-MACHINE-C-Wireless-LOGO

MAN AND MACHINE C Wireless Mouse

MAN-AND-MACHINE-C-Wireless-
PRO

Part functions

  1. Micro USB port: Used to charge the mouse. Cover during washing or rinsing. The cover is located on the bottom of the mouse.
  2. Charging cable: Used to charge the mouse.
  3. USB Port cover: Used to cover the Micro USB port during washing or cleaning.
  4. Power switch
  5. Scroll Wheel
  6. LED indicator: Red: mouse battery is charging, blinking blue: mouse is trying to pair, solid blue: mouse is in paired mode and connected to the computer.
  7. USB Dongle: Plugs to a computer USB port. Allows the mouse to connect to the computer wirelessly. The USB Dongle comes in the mouse box with each mouse.
  8. USB Port cover storage space: Keep the USB Port Cover in the storage space when it is not used to cover the micro USB port.
  9. Sensor LightMAN-AND-MACHINE-C-Wireless-FIG-1

Installation:

Plug the USB Dongle (7) into a computer USB port. Each dongle is already paired with it’s own mouse. Turn the mouse on (4). Wait for the mouse to pair automatically.
If you are using this mouse in combination with a Man & Machine Wireless Its Cool keyboard or Wireless Its Cool Flat keyboard, you can use one USB dongle to connect both devices. Once you have installed the first device and it is paired, follow the pairing procedure to connect the other device to the same dongle.

Pairing

The mouse is already paired with the USB dongle that comes in the mouse box. To pair the mouse with another dongle or to repair it with the dongle it came with: turn on the mouse by pressing the power button (4). Press the Scroll Wheel (5) and the Right Mouse Button at the same time to put the mouse in pairing mode. When the mouse is in pairing mode, the Blue LED (6) will blink. If the USB dongle is plugged in, unplug the USB dongle and plug it back to the PC. Keep the mouse close to the USB dongle. Once the mouse is paired and connected to the PC, the Blue LED will turn a solid blue (6). Note: The mouse will not work if it has lost its pairing. Loss of pairing is signaled by blinking blue light (6). Follow the procedure described above to restore pairing.

Battery charging

Connect the charging cable (2) Micro USB connector side to the mouse and connect the USB A connector side to a 5V USB charging device or a powered USB computer port. The Red LED (6) will stay on while charging. The Red LED will go off when the battery is fully charged. Remove and store the charging cable for future use.
Note: If the sensor red light at the bottom of the mouse doesn’t come on, charge the battery following the procedure described above. Note: The mouse will not work if the battery is empty. Charge timely following procedure described above.

Approved cleaning methods

  •  You can wipe the product with a soft cloth that is non-abrasive such as a microfiber cloth, a disinfecting wipe, a soft brush similar to a paintbrush in bristle stiffness or a sponge, but not a scourer of any sort.
  •  You can spray the product with soap and water or an approved disinfectant.
  •  You can rinse the product with soap and water or an approved disinfectant. Before rinsing, cover port (1) with cover (3). Make sure cover (3) is fully inserted (See figure A).

Approved disinfectants

  •  Chlorine based, up to 100,000 ppm (10%) bleach content
  •  Alcohol based
  •  Glutaraldehyde based
  •  Phenol based
  •  Formaldehyde based, up to 370,000 ppm (37%) formaldehyde content
  •  Oxidizing, such as Hydrogen Peroxide, up to 30,000 ppm (3%) content
  •  Quaternary Ammonium, up to 20,000 ppm (2%) content

Restrictions

  •  Platform: Windows
  •  Only clean using the cleaning methods and disinfectants described under “Cleaning instructions” in this manual.
  •  The mouse can not be immersed in liquid.
  • Always follow the instructions provided by the cleaning product manufacturer.
  •  Do not use petroleum-based cleaning fluids nor Acetone or abrasive cleaning aids and products.
  •  Do not expose the product to temperatures below 0 ºC or above 55 °C.
  •  Do not use temperature or pressure sterilization.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals