V-TAC VT-061 LED Tube Instruction Manual
- June 25, 2024
- V TAC
Table of Contents
V-TAC VT-061 LED Tube
Product Specifications
Model| Watts| Lumens| CRI| DF| Beam Angle| Body Type| IP Rating| Holder| Life
Span
---|---|---|---|---|---|---|---|---|---
VT-061| 9W| | >80| 0.5| | Plastic| IP20| G13| 25,000 Hours
Product Usage Instructions
Introduction & Warranty
This product should not be disposed of with other household wastes. Caution:
risk of electric shock.
Installation Instructions
To use the electronic ballast fitting, remove the electronic ballast from
the fitting and rewire the circuit as per the new fitting installation. Ensure
installation and wiring are done by a certified electrician.
New Fitting Installation
Wiring Diagram:
1. Switch off the power. 2. Remove the existing fluorescent lamp. 3. Remove the existing fluorescent starter. 4. Insert LED T8 starter. 5. Insert V-TAC LED Tube. 6. Switch ON the power.
FAQ (Frequently Asked Questions)
Q: What should I do in case of any query or issue with the product?
A: Please reach out to us at support@v-tac.eu
for assistance. For more products range or inquiries, contact our distributor
or nearest dealers.
INSTRUCTION MANUAL
T8 LED TUBES
TECHNICAL DATA
| MODEL | VT-061 | VT-121 | VT-151 | VT-062 | VT-122 | VT-152 |
|---|---|---|---|---|---|---|
| SKU | 21650,21651,21652 | 21653,21654,21655 | 21656,21657,21658 | |||
| 21686,21687,21798 | 21672,21673,21688 | 21674,21675,21799 | ||||
| WATTS | 9W | 18W | 20W | 7.5W | 16.5W | 24W |
| LUMENS | 850LM@Sphere360° | 1850LM@Sphere360° | 2100LM@Sphere360° | |||
| 850LM@Sphere360° | 1850LM@Sphere360° | 3000LM@Sphere360° | ||||
| CRI | >80 | >80 | >80 | >80 | >80 | >80 |
| DF | >0.5 | >0.7 | >0.7 | >0.5 | >0.7 | >0.7 |
| BEAM ANGLE | 160° | 160° | 160° | 160° | 160° | 160° |
| BODY TYPE | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic |
| IP RATING | IP20 | IP20 | IP20 | IP20 | IP20 | IP20 |
| HOLDER | G13 | G13 | G13 | G13 | G13 | G13 |
| LIFE SPAN | 25,000 Hours | 25,000 Hours | 25,000 Hours | 25,000 Hours | ||
| 25,000 Hours | 25,000 Hours | |||||
| ON/OFF CYCLES | >15,000Times | >15,000Times | >15,000Times | >15,000Times | ||
| >15,000Times | >15,000Times | |||||
| DIMENSION | 600x28mm | 1200x28mm | 1500x28mm | 600x28mm | 1200x28mm |
1500x28mm
INPUT VOLTAGE| AC:220-240V,50Hz| AC:220-240V,50Hz| AC:220-240V,50Hz|
AC:220-240V,50Hz| AC:220-240V,50Hz| AC:220-240V,50Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. The LED tube can be used in hotels, offices, factories, conference rooms, meeting rooms, commercial complexes, residential buildings, schools, colleges, universities, hospitals, etc.
PACKAGE CONTENT
- LED Tube (1PC)
- Instruction Manual (1PC)
- Dummy Starter (1PC)
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
INSTALLATION INSTRUCTION
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock
WARNING
- Installation should only be done by a certified electrician
- Operation environment temperature: -20°C to +45°C.
- For Indoor use only
- Do not use DC electricity.
- Do not modify the fitting to be used with the LED Tube.
- V-TAC LED Tubes are NOT designed to be used in emergency operations.
- For Indoor use only.
- Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuit. In order to use the electronic ballast fitting you must ensure to remove the electronic ballast from the fitting and rewire the circuit as per new fitting installation as shown below. Ensure the installation and wiring is carried out by certified electrician.
NEW FITTING INSTALLATION
- Installation should only be done by a certified electrician
- Switch Off the power.
- Ensure the wiring diagram is followed as highlighted.
- Insert V-TAC LED Tube.
- Switch On the power to test the light.
INSTALLATION & REPLACEMENT OF FLUORESCENT LAM (SINGLE MAGNETIC BALLAST CIRUIT)
- Installation should only be done by a `certified electrician.
- Please refer to the wiring diagram for replacingfluorescent tube on a single magnetic ballast circuit with V-TAC LED Tube.
