endeavour ET1049 Master Radiator Pressure Test Kit Instruction Manual

: May 15, 2024
: endeavour

Table of Contents

FEATURES
SPECIFICATIONS
INSTRUCTIONS
APPLICATIONS
APPLICATION BY CAR MAKES
APPLICATION BY ADAPTER NUMBERS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**endeavour ET1049 Master Radiator Pressure Test Kit Instruction Manual

**

FEATURES

Pressure pump to test leaks in cooling system
Provided with 3 twist-on type and 16 threaded type adapters, covering almost all types of car makes and models on the market
Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast
Radiator cap test tubes (black and blue) to test if the radiator cap from the car has leaks
Coolant hose and drain hose are made of cold-resistant material

SPECIFICATIONS

PRESSURE PUMP

G auge Reading	0-2.5 kg/cm² / 0-35 psi
Hose Length	550 mm / 21.65 inches
Gauge Tilt Angle	45°
Tube Surface	Anodizing

RADIATOR CAP TEST TUBES

Material	Nylon 6-6
Tester Size (Black)	For R123 and R124
Tester Size (Blue)	For R123 and R125

TWIST-ON TYPE ADAPTERS

Cap Numbers	No. 3, 4, and 5
Fit to	Radiator filler necks
Cover Material	Steel
Cover Function	Reduce heat transfer

THREADED TYPE ADAPTERS

Cap Numbers	No. 6, 7, 8, 9, 0, A, B, C, E,F, G, H, M, S, T, and X
Fit to	Recovery tank filler necks
Cover Material	Nylon 6-6

THERMOMETER

Temperature Range	-50 – 150°C
Temperature Range	-50 – 300°F

VACUUM-TYPE COOLANT REFILL TOOL

1	Coolant suction hose	1,500 mm / 4.9 ft
2	Drain hose	600 mm / 2 ft
3	Coolant valve
4	Hook
5	Gauge	-1 – 0 bar / -76 – 0 cmHg
6	Air valve
7	Air compressor connector
8	Coolant refill hose	700 mm / 2.3 ft
9	Hose connector to adapters

OTHER TOOLS REQUIRED BUT NOT INCLUDED

Air compressor

Container with premixed coolant at adequate volume

**CONICAL ADAPTER

**

Size Range	16-43 mm / 0.63-1.69 inches
Material	Rubber

**WRENCH FOR THREADED TYPE ADAPTERS

** For fastening and unfastening adapters

INSTRUCTIONS

Always read the instructions carefully before using the tool
This tool set is designed for repair and maintenance on automotive cooling systems only
Make sure coolant temperature is at room temperature before working
Ensure the working area has adequate lighting
Keep children and unauthorized persons away from the working area
Keep working area clean and tidy, dry and free from unrelated materials
DO NOT allow untrained persons to use this tool kit
Always wear eye protection that meets OSHA and ANSI Z87.1 standards
Always wear gloves when working with the tool
Always wear ear protection
Disposal : Customers should follow local regulations to handle used/waste parts

COOLING SYSTEM LEAK TEST

Remove the original cap
Choose a suitable adapter
Connect the adapter and the pressure pump
Pump pressure to 10-15 psi (Fig 1)
Rest for at least 15 minutes
Check to see if the pointer on the gauge falls.
If it falls, there are leaks in the cooling system

VACUUM-TYPE COOLANT REFILL

Jack up the car and drain old coolant
Choose a suitable adapter or the conical adapter
Hang the tool under the hood
Connect the adapter to the cooling system, and connect the tool’s coolant hose
Put the hose with filter in the premixed coolant, and remain submerged under the surface the whole time
Make sure all valves are closed and connect to air compressor
Open the air valve and vacuum can be created ( Fig 2)
When no more vacuum can be created, turn off the air valve
Open the coolant valve, and the coolant will be introduced to the cooling system automatically (Fig 3)
Verify the coolant level, connect the original cap. Fast refill and no air bleeding.

RADIATOR CAP LEAK TEST

Connect the radiator cap to the blue or black tube
Connect a suitable adapter on the other side
Pump the pressure that is higher than what is specified on the cap to see if the cap can release pressure (Fig 4)
Pump the pressure that is lower than what is specified on the cap to see if the cap can hold pressure.

APPLICATIONS

The application below shows a broad application. More vehicle applications are possible. Some car models may use multiple types of sizes due to variations in body style (e.g. sedan, hatchback, or cabriolet), engine size and capacity (e.g. 1.6L, 1.8L, 2.4L), and engine numbers.

APPLICATION BY CAR MAKES

CAR MAKE	ADAPTER
Alfa Romeo	R
Audi	8, 9, A
BMW	0, B, S
Buick	3, C, G
Cadillac	3, C, G
Chevrolet	3, 6, C, G
Chrysler	3, 5
Citroen	3, 5, R
Dodge	3, 5, C
Fiat	3, C
Ford	3, 4, 6, C, F, S
GMC	3, C, G
Honda	3, 5
Hyundai	3, 4, H
Jaguar	F
Jeep	3, C
Kia	3, 4, H
Land Rover	0, 6, F
Lincoln	6, F
Mazda	3, 4, 5, F
Mercedes-Benz	3, 6, E, M, R
Mitsubishi	3, 4, 5, R
Nissan	4, R
Opel	3, 5, C, G, R
Peugeot	3, R
RAM	3, C
Renault	3, R
SEAT	8, 9, S
Skoda	8, 9
Saab	6, G
Subaru	3, 4, 5
Tesla	C
Toyota	3, 5, T
Volvo	F, R, X
Volkswagen	8, 9, A, S

APPLICATION BY ADAPTER NUMBERS

Adapter #3
Buick, Cadillac, Chevrolet, Chrysler, Citroen, Dodge, Fiat 500, Ford, GMC, Honda, Hyundai, Jeep, Kia, Mazda, Mercedes-Benz, Mitsubishi, Peugeot, RAM, Renault Koleos, Subaru, Toyota

Adapter #4
Ford Explorer, Hyundai, Kia, Mazda, Mitsubishi, Nissan, Subaru

Adapter #5
Chrysler Sebring, Citroen C1, Dodge, Honda, Mazda, Mitsubishi, Opel Agila, Peugeot 107, Subaru, Toyota.

Adapter #6
Chevrolet Aveo, Ford, Lincoln, Land Rover, Mercedes-Benz, Saab

Adapter #8
Audi, SEAT, Skoda, Volkswagen

Adapter #9
Audi, SEAT, Skoda, Volkswagen

Adapter #0
BMW, Land Rover

Adapter A
Audi, Volkswagen

Adapter B
BMW

Adapter C
Buick, Cadillac, Chevrolet, Chrysler, Dodge, Fiat 500X, Ford, GMC, Jeep, Opel, RAM, Tesla Model X

Adapter E
Mercedes-Benz

Adapter F
Ford, Jaguar, Land Rover, Lincoln, Mazda, Volvo

Adapter G
Buick, Cadillac, Chevrolet, GMC, Opel, Saab 9-7x