DELAVIN F606 Semi Framed Shower Glass Panel Instruction Manual
- May 15, 2024
- DELAVIN
Table of Contents
DELAVIN F606 Semi Framed Shower Glass Panel
Product Information
Specifications
- Model: F606
- Size: 86*183cm
Product Usage Instructions
- Step 1: Tear off the glass protective film before installation.
- Step 2: Determine the position of the shower door according to the length of the black supporting bar. Fix the bottom aluminium at the marked position and attach the wall profile to the wall, ensuring it is installed vertically.
- Step 3: Ask someone to lift the glass and insert it into the wall profile. Make sure the telescopic rod is level, mark the hole in the horizontal position, and fix the block with screws. Select the appropriate position and fix the telescopic rod on the glass as shown in the picture. Adjust the length of the telescopic rod and fix both sides with tools.
- Step 4: Follow all the steps above to complete the installation of the shower screen.
FAQ
- Q: What tools are required for installation?
- A: You will need 3 plastic gaskets, 440 x7 screws, 430 x1 screws, and shims.
- Q: How do I adjust the length of the black supporting bar?
- A: The length of the black supporting bar is adjustable. Based on its length, determine where to install the shower door.
- Q: What should I do before inserting the glass into the wall profile?
- A: Make sure to lift off the glass protective film before inserting the glass into the wall profile.
PARTS AND TOOLS
TEAR OFF THE GLASS PROTECTIVE FILM BEFORE INSTALLATION
DIMENSIONS
- The length of black supporting bar is adjustable. According to the length of supporting bar, determine the position of the shower door to be installed.
- Fix the bottom aluminium at the marked position. Attach the wall profile to the wall. Check its position, the wall profile must be installed strictly vertically.
INSTALLATION INSTRUCTIONS
- Ask someone to lift the glass, insert the glass into the wall profile.
- Select the appropriate position and fix the telescopic rod on the glass like the picture shows.
- Make sure that the telescopic rod is level, mark the hole in the horizontal position, and fix the block with screws.
- Adjust the length of the telescopic rod, and fix the two sides with tools.
- Follow all the steps above, the shower screen is installed and ready to be used.
Read User Manual Online (PDF format)
Loading......