PHILIPS DH3X24 Dynalite Electrical Accessory Instruction Manual
- May 15, 2024
- Philips
Table of Contents
PHILIPS DH3X24 Dynalite Electrical Accessory
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
WHAT’S IN THE BOX
Dimension
INSTALLATION INSTRUCTION
- De-rate the total load current of each Philips Dynalite controller to 70% of its rated value.
- Rated voltage not to exceed 400 V. Rated current not to exceed 125 A. The enclosure complies with IEC/EN 60670-24.
- Prospective short-circuit current not to exceed 10 kA unless protected by a current limiting device with a cut-off current not exceeding 17 kA.
- © 2023 Signify Holding. All rights reserved. Specifications are subject to change without notice.
- No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed.
- Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
- www.dynalite.com
- AZZ 543 1023 R05
Documents / Resources
|
PHILIPS DH3X24 Dynalite Electrical
Accessory
[pdf] Instruction Manual
DH3X24 Dynalite Electrical Accessory, DH3X24, Dynalite Electrical Accessory,
Electrical Accessory, Accessory
---|---
Read User Manual Online (PDF format)
Loading......