fischertechnik TXT 4.0 Robotics Base Set Instruction Manual

: May 15, 2024
: fischertechnik

Table of Contents

fischertechnik TXT 4.0 Robotics Base Set
Product Information
Product Usage Instructions
Spare parts list
Tips for assembly
Safety Information
Driving unit
Steering
Circuit diagram
Documents / Resources

fischertechnik TXT 4.0 Robotics Base Set

fischertechnik-TXT-4-0-Robotics-Base-Set-product

Product Information

Specifications

Product Name: TXT 4.0 Controller
Components: Steering, 3x Ultrasonic sensor, Rechargeable battery and charger, Encoder motor, USB camera, Micro servo 4,8/6V
Manufacturer: fischertechnik GmbH
Address: Klaus-Fischer-Str. 1, 72178 Waldachtal, Germany
Contact: Phone: +49 74 43/12-43 69, Fax: +49 74 43/12-45 91,
Email:info@fischertechnik.de
Website:www.fischertechnik.de

Product Usage Instructions

Safety Information

Attention! Risk of injury due to sharp edges and points on functional components! All components, especially moving parts, should be maintained and cleaned as necessary.

Power Source

The product may only be used with one of the following Fischertechnik energy sources: Power Set or Art No.: 35537 Accu Pack 8.4V. Do not use 9V NiMH accu packs with this product.

Assembly Tips

Refer to the provided assembly tips for guidance on putting together the components.

FAQ

Q: What type of batteries can be used with the TXT 4.0 Controller?

A: The product is compatible with Fischertechnik energy sources such as the Power Set or Art No.: 35537 Accu Pack 8.4V. Do not use 9V NiMH accu packs.

Q: How should I clean and maintain the components?

A: Ensure all components, especially moving parts, are cleaned and maintained as needed to ensure proper functionality and longevity of the product.

Q: Where can I find more information about STEM coding competitions?

A: Visit the Fischertechnik website at www.fischertechnik.de/elearning-stem-coding-competition. for more details.

Software and accompanying pedagogical materials:

On the Fischertechnik eLearning Portal, you will find:
Installation instructions for ROBOPro Coding App (iOS, Android, Windows, MacOS, Linux)
Information on the TXT 4.0 Controller
Accompanying pedagogical materials for instructional use
Link to the eLearning Portal: https://www.fischertechnik.de/elearning-stem-coding-competition .

Spare parts list

fischertechnik-TXT-4-0-Robotics-Base-Set-fig-1

Tips for assembly

fischertechnik-TXT-4-0-Robotics-Base-Set-fig-2

Plugs and cables
When mounting the tires, please pay attention to the direction of the tread, left and right.
left

Safety Information

Caution! Be careful not to hurt yourself on components with sharp or pointed edges!
All components, especially moving parts, should be maintained and cleaned as necessary.

Electromagnetic Interference

If the Controller is affected by external electromagnetic influences, it can still be used for the purpose intended after the end of the interference.
It is possible that the power supply will have to be interrupted for a short time and the Controller will restart.
Ensure that the models are connected only to equipment rated in protection category II and marked with the appropriate symbol.
The product may only be used with one of the following Fischertechnik energy sources: Power Set or Art No.: 35537 Accu Pack 8.4V.
You are not allowed to use 9V NiMH accu packs in this product.
Do not attempt to charge NON-rechargeable batteries.
Rechargeable batteries are only to be charged by adults.
Take rechargeable batteries out of the battery tray before charging them.
Insert batteries with the correct polarity.
Remove dead batteries from the product.
Do not short-circuit the connecting terminals!
Discard spent dry cells at a special waste disposal center.
Do not insert the wires into an outlet!
Regularly inspect the battery charger for damage. If the battery charger has been damaged, it should not be used further until fully repaired.
No electrical components (motors, lamps) are to be connected to any other power supply than that provided by Fischertechnik.
Instructions for Environmental Protection www.fischertechnik.de/environment

Driving unit

fischertechnik-TXT-4-0-Robotics-Base-Set-fig-6

Steering

fischertechnik-TXT-4-0-Robotics-Base-Set-fig-9

Switch on TXT 4.0 Controller – Plugin Servo – Servo moves to center position – Install servo arm as shown in illustration (steering must be in center position).