MINOLTA MAXXUM 7000 SLR Camera Owner’s Manual
- July 31, 2024
- MINOLTA
Table of Contents
- MAXXUM 7000 SLR Camera
- Specifications
- Product Usage Instructions
- 1. Attaching Lens
- 2. Loading Batteries
- 3. Power On
- 4. Understanding Parts and Features
- 5. Loading Film
- 6. Setting Film Speed
- 7. Taking Pictures
- Q: How do I switch between different exposure modes?
- Q: How can I ensure proper focus when using manual
- Q: What is AE lock and when should I use it?
MAXXUM 7000 SLR Camera
“`html
Specifications
- Brand: Minolta
- Model: MAXXUM 7000
- Technology: Computerized
- Features: Touch control, centralized data display
Product Usage Instructions
1. Attaching Lens
Follow the instructions provided in the manual to correctly
attach the lens to the camera body.
2. Loading Batteries
Insert the required batteries into the battery holder as per the
polarity markings. Ensure the batteries are fully charged.
3. Power On
Turn on the main switch of the camera to activate the
device.
4. Understanding Parts and Features
Familiarize yourself with the names of parts as listed in the
manual to effectively operate the camera.
5. Loading Film
Refer to the film loading section in the manual for step-by-step
instructions on loading film into the camera.
6. Setting Film Speed
Adjust the film speed setting on the camera according to the
type of film being used.
7. Taking Pictures
Once the camera is set up, you can proceed to take pictures
following the guidelines provided in the manual for different
shooting modes.
FAQ
Q: How do I switch between different exposure modes?
A: Use the exposure mode selection feature on the camera to
choose between different exposure modes like Program mode,
Aperture-priority mode, Shutter-priority mode, etc.
Q: How can I ensure proper focus when using manual
focusing?
A: When using manual focusing, adjust the focusing ring on the
lens until your subject appears sharp in the viewfinder or on the
screen.
Q: What is AE lock and when should I use it?
A: AE lock stands for Auto Exposure lock. It is used to lock the
exposure settings to ensure consistent exposure levels, especially
in challenging lighting conditions.
“`
.~ .
MINOLTA
[EJ OWNER’S MANUAL
MAXXUM
7000
The Minolta MAXXUM uses computer technology to bring fascinating new
dimensions to your photography. From touch control to centralized data
display, every aspect of the MAXXUM is designed for easy operation and
outstanding results.
Among its major features are: The MAXXUM autofocus system for precise, instant
sharpness with the full range of new Minolta AF lenses. C> LCD data display
panels on top and in viewfinder for maximum information in each mode . c>
Automatic Multi·Program Selection of the optimum AE program to match the
actual focal length in use C> with unique program shift to tailor each for C>
special needs. C> Aperture – and shutter-priority modes plus metered manual
for creative flexibility . C> Motorized film control for loading, automatic
film speed setting with DX-coded films, single-frame or continuous advance up
to two frames per second, and power rewind.
Advanced new accessories include: C> The MAXXUM Flash 2800AF with AF assist
for autofocus in low light or total darkness, TTL metering in all modes, and a
new auto fill-flash program. C> The Program Back 70 that makes data
imprinting, intervalometer operation, and long exposures easier than ever . C>
MAXXUM AF lenses which already range from 24mm wideangle to 300mm f / 2.8 Apo
tele and include five lightweight macro-zooms . C> User-changeable focusing
screens, wireless remote controls, eyepiece correctors, etc., fill out the
growing system.
Before using your MAXXUM, carefully read this manual. As you do, attach the
lens, load batteries, switch on power, and learn about the camera’s parts and
features. Then load it with film and proceed to actual picture-taking . Be
sure to follow the instructions and notes , and keep this manual handy for
further reference . This way you can get better pictures and take full
advantage of the many advanced features built into your Minolta MAXXUM.
Fold out the front and back covers of this manual for easy reference to names
of parts.
NAMES OF PARTS
Data panel Main switcn – - __ Program ‘0″0< – bu tto n Shutter speed k eys
Battery hold er Depth-of-fi eld scal e
Drive mode key
;;1&; – ——- Exposure adju stment key Film speed key A p erture ke ys L ens
release
Focusing ring
DATA PANEL
Exposure mod es- – – – -
Film sp ee d inrl ; ~ o ‘+ n’
Ex posure adju stm ent remi nder
Frame counter /se lf- tim er cou ntdown /”bu Ib” elapsed tim e
IfSf.iO ‘C-f’ ‘c-f’ ‘«,-.f,, ‘C,-.f,’. 0.0
Shutter speed/film speed Selectab le-sett ing indicators Aperture/exposu re adj ustment _____ Drive modes/self-timer
scre en
utter speed / film speed
Metering indicato rs
Ex posure mod ”’-
exposure adjustment
Exposure adjustment reminder
NOTE Whil e all p o ss ib le displays are shown togethe r here, o nly
applicable d ispla y s appear during operation.
TABLE OF CONTENTS
Strap and case . . . . . . . . . . . .
. .. 2
Summary of operation in P mode . . . . . .. 4
Attaching lens. . . . .
. . ….6
Batter ies and power.
. . .8
Memory storage . .
. . . . . 11
Main switch . . . . .
. 12
Operating button. .
. 13
Film loading. . . . . . . . . . .
.14
Setting film speed. . . . . . .
. 17
Fundamentals of exposure *.
.18
Exposure mode selection .
. . . . . . .20
Program mode . . . . . . . .
. . 22
Program shift . . . . . . . . .
. 24
Aperture -priority mode
. 26
Shutter-priority mode . . . .
. 28
Metered-manual mode . . . .
. 29
Aperture and shutter speeds
.30
Drive modes. . . . . . . . . . .
. .. .. … 31
Autofocusing . .
. 32
Manual focusing
.34
Taking pictures.
.37
Rewinding and unloading film .. .
.38
Flash photography…. . .. . .
. . 39
Creative aperture control * . .. .
. 40
Creative shutter-speed control *
. 41
AE lock .. . …. … . .. . . .
. 42
Exposure adjustment . …. …. .
.43
When to use AE lock and exposure
adjustment . . . . . . . . . . . . . . .
.44
Depth of f ield* . . . . . . . . . . . . . .
. 46
Timed long exposures (“bulb” operation) .47
Self-timer operation. . . . . . . . . . . . . . .48
Other focusing methods . . . . .
. 51
Accessories . . . . . . . . . . . . . .
. 52
Technical details . … ….. . . … ….. 62
- Basic information on photo principles and techniques
STRAP AND CASE
Attach the strap (suppl ied with camera) and case (optionally available) as
shown . The eyepiece cap slips on the strap to keep it handy for use.
2
Putting camera in its case
1. Attach lens cap. 2. Slide main switch to LOCK . With zoom lenses: Adjust zoom ring until le ns barrel is at its shortest position.
3. Insert camera in case as shown.
3
SUMMARY OF OPERATION IN PROGRAM MODE
M
cffi:J
LOCK ON .’1)
— S.T. tJ!fi I
o 00 0000000110000 0 0 11 0
i> e oooo. ooooo.
1. Slide main sw itch to _I))
(p. 12).
2. Open back cover (p. 14) .
ISO
~
In” ‘u
~
3 . Load film properly and close cover (p. 14) .
‘) ) )1 -11 11 1)1 IEJGf~
PROGRAM
~ : S CST
~
~
……..
? ~
4. Check that film has advanced to 5 . Set film speed (p. 17 ; autom ati- 6 . Set P mode, S drive, and cancel
first frame (p. 15).
cally set with DX-coded films).
any exposure adjustm ent by using
appropriate keys or pressing pro-
gram reset button (p . 22). 4
7 . Turn on the meter (p. 13).
8 . Focu s (p. 32) .
10. After last frame, rewind film 11. Rem ove film (p . 38). (p.38).
9. R elease shutter (P. 3 7) .
~
LOCK ON .’1)
~ –
12. Slide main switch to LOCK (p. 12) .
5
ATTACHING AND REMOVING LENS
To attach:
1. Remove body cap and rear lens cap as shown .
6
2. Al ign mounting index (red bead) on lens barrel with mounting index (red dot) on lens mount. 3. Insert lens bayonet into mount and turn lens clockwise until it locks .in place with a click.
To remove:
PROGRAM
250
~ lM n – !J S C S.T.
While pressing lens release, turn lens counterclockwise as far as it will go,
then lift lens out of mount. When the camera’s meter is on and the lens is
removed, the aperture display shows “- ”.
Care of glass surfaces
· Never touch lens elements or eyepiece with your fingers. If the lens becomes
dirty, clean it gently with a lens brush. Only if necessary, moisten a sheet
of lens tissue with one drop of len s-clean ing fluid . Then, starting at the
center and using a circular motion, lightly wipe the glass surface .
· Never lift the mirror or touch its surface, as this may im pair its
alignment. Dust specks on the mirror’s surface will not affect meter readings
or picture quality; if they are annoying, have the camera cleaned at an
authorized Minolta service facility .
NOTES · When attaching or removing lenses, never touch anything inside the
camera, especially the lens contacts or mirror. · To protect lens contacts and
lens elements, always attach body and rear caps whenever a lens is not in
place.
7
BATTERIES AND POWER
The camera uses four AAA-size 1.5v alkaline-manganese batteries . These supply
power for all functions including film transport, metering, autofocusing, and
shutter release.
To load batteries:
1. Make sure main switch is at LOCK and remove battery holder by turning attaching screw with a coin or similar object.
2. Place new batteries in holder with plus (+) and minus (- ) ends as indicated . Holder pivots for easier loading.
8
3. Attach battery holder to body. Turn attaching screw clockw ise to tighten
battery holder to camera body.
Exposure mode, drive mode, and frame number will appear in the data panel. If
no display appears, batteries are improperly installed or completely dead.
Check that batteries are loaded correctly or replace them .
NOTES · To prevent damage from battery leakage or bursting, never mix
batteries of different types, brands, or ages. · If camera will not be used
for more than two weeks, batteries should be removed.
Used batteries should not be disposed of in fire. · Keep batteries away from
young children. · The camera and standard battery holder are designed to use
alkaline-manganese batteries; do not use carbon-zinc or nickel-cadmium
batteries in the standard battery holder. · To removing batteries, first pull
out plus (+) end of battery, then lift battery out of holder.
9
Battery check To check battery condition : After exposure,
keep finger on operating button and check whether LCDs are blinking . If so,
battery power is getting low and fresh alkaline-manganese batteries should be
installed.
Low power indications Fresh batteries should be installed in any of
the following cases : · When LCDs in viewfinder or on camera body blink . · If
shutter will not release and shutter speed and aperture are not displayed when
operating button is pressed down . · When film advance, rewind, or autofocus
systems will not operate or when operation is extremely slow.
Cold-weather operation Performance of batteries tends to decrease as
they become colder. Before using the camera in cold weather, make sure fresh
batteries are loaded. A spare set should be carried in a warm batteries are
loaded. A spare set should be carried in a warm pocket, in case you need to
change batteries while shooting. Battery capacity will be restored as
temperature rises.
For prolonged cold-weather use (at approx. O°C (32° F) or lower), using the
optional Battery Holder BH-70L or External Battery Pack EP-70 with AA-size
nickel-cadmium batteries is recommended .
10
MEMORY STORAGE
When main switch is in LOCK position, the following data is stored in the
camera’s memory: frame number, film speed, exposure mode, drive mode, exposure
adjustment, and manually selected exposure settings.
Memory backup by built-in lithium battery Data is stored using power from the
batteries in the battery
holder. When those batteries are exhausted or if battery holder is removed, a
built-in lithium battery supplies power for memory backup. Frame number and
film speed are stored, and exposure mode, drive mode, and exposure adjustment
are reset to “PROGRAM”, “S”, and “0.0”, respectively .
When the battery holder (with fresh batteries) is attached and the lithium
battery is exhausted, the film speed setting will blink as a warning. When
both lithium and regular batteries are completely exhausted, all displays go
blank . After fresh batteries are installed, all memories are reset : frame
number to “0”, film speed to “ISO 100”, exposure mode to “PROGRAM”, drive mode
to “S”, and exposure adjustment to “0.0”.
a The lithium battery should last approximately 1 years . When
replacement becomes necessary, contact an authorized Minolta service facility.
11
MAIN SWITCH
~
–
“”‘””
C0=J
LOCK ON .01)
t1~DlI
F= …
~
,..,”1.
To prevent battery drain or accidental exposures, the main
switch should be set to LOCK position . To operate camera , slide
main switch to ON or .’1) position.
At .1)) position, the camera gives audible beeps: when subject
is brought into focus; as a slow shutter·speed warning; at the end
‘–‘ of the roll ; and during self·timer operation .
Slow shutter-speed warning With main switch at .1)) position and exposure mode
set to
program (P) or aperture-priority (A) mode, the camera will beep to warn that
the shutter speed may be too slow for blur-free hand-held exposures . If
possible , a faster shutter speed should be set by using program shift (in P
mode) or a larger aperture (in A mode). If necessary, camera can be mounted on
a tripod , braced against a post or other firm support, or flash may be used .
When you touch the operating button , camera beeps if the shutter speed is
below:
1/ 30 sec. with lenses shorter than 35mm, 1/60 sec. with lenses from 35mm to
105mm, 1/ 125 sec. with lenses longer than 105mm.
12
OPERATING BUTTON
The operating button controls meter activation, autofocusing
with focus hold, and shutter release. Operating button functions
only when main switch is at ON or -Ill ; this prevents accidental
exposures and prolongs battery life.
Meter activation To activate the meter, touch the operating button. In low
light, the LCD panel in the viewfinder is automatically illuminated . If
proper contact is not possible (e.g., when fingers are very dry, or when
wearing gloves) , press the button slightly. For easier operation of other
controls, meter remains on for 10 seconds after you lift your finger from the
button.
Autofocusing with focus-hold To activate autofocusing, press button halfway.
Focus is held
unti I you let up on the button .
Shutter release To release the shutter, press button all the way down. In P,
A,
and S modes, camera will automatically set exposure, focus lens, then release
shutter .
NOTE
If operating button becomes dirty or oily, set main switch to
LOCK and wipe button with a clean, dry cloth.
13
FILM LOADING
Always load film in subdued light or at least shaded from direct sunlight.
AM
LOCK ON el))
– C S.T. !1!iEJ111
1. Switch camera on.
2. Open back cover by pressing button in the center of the back cover release and sliding release downward.
3. Place film cartridge in film chamber. Extend tip of film leader past the red leader index . Make sure holes in lower edge of film engage teeth on sprocket. If fi 1m extends too far or does not lie flat, gently push excess back into car· tridge.
ISO I ….. n IUU
fiLM:] LQJscs.T.
·
ISO
Inn IUU
S C S.T.
4. Close back cover by pressing until it snaps shut .
5. Camera will automatically advance film to the first frame, and “1” will appear in the frame counter . This indicates that the film is properly loaded and advancing correctly. If frame counter sti II shows “0”, open back and repeat steps 2 to 4 .
15
Frame counter
I…. -, [FILM 1 ,
FILM C
……. F.I-:L,,M.c-,
Film loading precautions
· Before opening the camera back, always check film window to see if film is
loaded and check that film is completely rewound (frame counter will show “0”)
. · If film leader is incorrectly shaped, film may not advance properly .
WRONG
The frame number increases by one with each exposure. Frame number increases only when film is loaded and advancing properly .
RIGHT
· Do not touch any parts or areas shown in blue.
16
SETTING FILM SPEED
Automatic setting coded films
II II II nv) ~01
with DX –
-~
Manual setting of film speed
ISO
~ :
,nn IUU S C S .T.
= ~ c:®:::l
LOCK ON . “1
rJO”D”1 LjJ
i
The film speed for DX- While pressing film speed key (marked ISO), press the shutter coded films is automatically set, speed keys to increase or decrease the displayed value . Each time and appears for ten seconds in a shutte r speed key is pressed, setting changes by 1/ 3 of a stop . the data panel as soon as the Settings change rap idly when shutter speed key is held down. back is closed . Speed for these Film speed setting can be checked at any time by pressing ISO films can also be set manually key. to a higher or lower value after film has been loaded .
17
FUNDAMENTALS OF EXPOSURE CONTROL
When you take a picture, the shutter opens, and Iight ‘from the subject passes
through the lens to form an image on the film. To obtain correct exposure for
the subject brightness and film being used , the aperture (size of the lens
opening) and shutter speed (length of time the shutter is open) must be
controlled .
As indicated by the aperture diagram next to each f-number in the figure,
large f-numbers (e.g ., f/16 and f/11) represent small apertures, and small
f-numbers (e.g., f/2 and f/1A) represent large apertures . Each standard
f-number setting (e .g., f/8) lets in twice as much light as the next larger
one (f/11) and half as much as the next smaller one (f/5.6). This difference
in exposure between standard f-numbers is called one “stop”.
Shutter speeds are expressed in fractions of a second (usually the reciprocals
of numbers shown on shutter speed scales) and in seconds. Each standard
shutter speed (e.g., 1160 sec .) allows light to strike the film twice as long
as the next faster one (1/125) . This exposure difference between standard
shutter speeds is
18
also called one “stop”. Total exposure on the film is determined by
the combination of aperture and shutter speed. Using the next smaller f-number
(i.e ., giving one stop more exposure) will balance using the next faster
shutter speed (i.e ., giving one stop less exposure) and so on. A great range
of combinations (f/5.6 at 1/30, f/4 at 1/60, f/2.8 at 1/125, etc.,) will thus
yield the same total exposure.
The diagonal lines correspond to exposure values (EV); all of the aperture
/shutter-speed combinations indicated by a given line will produce the same
exposure. At a particular film speed, the EV increases by one each time the
subject brightness doubles, and thus the exposure required will decrease by
one stop. On the other hand , when the EV is one unit lower (i.e ., when the
subject is only half as bright), the exposure must be increased by one stop.
The fi Im-speed-coupled metering system measures the brightness of the subject
and computes the EV needed for proper exposure. This EV is used for setting
aperture and shutter speed.
:c
OJ
ciS
t
OJ
~
ti
Q)
E
:0 (fJ
~
.x
Co
~
0
~
~k-
«)
~
Aperture
32 0
2 0 ‘E”
0 16
(fJ
11 0
~
~
~
8 0
~’->”k
5 .6 0
~
4 0
~-‘k>”+
2.8 0
~+-
2 0
‘k-+”~>
1.4 0
= = o Shutter speed (sec) 0 0 0 0 0 CI CI CI C C c:::::::I c:::::::I c:::::::I c:::::::I c:::::::I
19
Slower …t. – — – – – – – – – – – – – — ·· Faster
EXPOSURE MODE SELECTION
Program (PI mode
Your Minolta MAXXUM features four exposure-control modes. The following summaries will help you choose the best one for a specific situation.
PROGRAM
Aperture-priority (A) mode
A
Program (PI mode is ideal
when you just want to com-
pose and shoot. Aperture and
shutter speed are set automati-
cally and displayed in the view-
finder and data panel.
MAXXUM’s
Automatic
Multi -Program Selection auto-
matically selects the program
according to focal length in
use . For its program shift
feature, see page 24.
Use A mode when you want to control depth of field. The aperture can be set in half-stop increments. The stepless shutter speed for accurate exposure is automatically set by the camera and displayed to the nearest half-stop.
20
Shutter-priority (S) mode
s
-,
C
S- Un ”
Metered-manual (M) mode
M
For photographing moving subjects, S mode is the choice. You can use fast shutter speeds, up to 1/ 2000 sec., to “freeze” action, or slow speeds to intentionally blur the movement. The camera will automatically set the aperture and display it to the nearest halfstop.
In M mode, you get full creative control of exposure. Any available shutter speed or aperture can be set. The metering indicators in the viewfinder can be followed, or you can vary exposure based on your own experience.
Setting exposure mode is a simple, two-step operation : While pressing
exposure mode (MODE) key , press either of the shutter speed keys until
desired mode is displayed in the data panel : “PROGRAM” for programmed
auto-exposure mode “A” for aperture-priority mode “S” for shutter-priority
mode “M” for metered-manual mode
21
PROGRAM (P) MODE
To set mode:
–
While pressing MODE key, press either of the shutter speed keys until
“PROGRAM” appears in the data panel.
Program reset
= When you want to quickly
set the camera to Program mode, S drive mode, and cancel any exposure adjust·
ment, just press and release the program reset (P) button.
Automatic
Multi-Program
Selection (AMPS)
In P mode, one of three
programs is automatically
selected to match the lens focal
length actually in use .
Shorter than 35mm:
Wide program sets smaller
apertures for maximum
practical depth of field.
35mm to 105mm:
Standard program is
Min olta’s faster·speed type
that chooses optimum shut·
ter speeds and apertures.
Longer than 105mm :
Tele program selects faster
shutter speeds to protect
against blur from camera
shake.
22
30 15 8 4 2
~’V
/ V V
Aperture
,,-V
V-1V/4 V 1/11
/ J/ V r. /
‘f/ I
32 22 16 11 8 5.6 4
[$ 41/
‘:f/ ~ ~ I
J
II
2.8 2 1 A
1
Shut1er speed (sec.)
NOTES
· Program selection is automatic ; it is not possible to manually select a
specific program . · With zoom lenses, the program automatically changes as
you zoom from one range to the next. With the AF 28135mm zoom, for example, as
you zoom from 28mm to 135mm, the program changes from Wide through Standard to
Tele. · If light level is outside the met ering range , · blinks in vi
ewfinder as a warning that exposure may not be correct.
· If both shutter speed and aperture blink, required shutter s peed-aperture combination is not available .
23
Program shift This feature lets you temporarily select
alternative aperture-shutter speed settings while remaining in Program mode .
Both settings change as the program is adjusted for faster/ slower shutter
speeds and larger/smaller apertures . Programmed settings can be shifted in
half-stop increments, and exposure mode LeDs blink to indicate when program
shift is in use .
Using program shift To change aperture-shutter speed settings,
press either shutter speed or aperture keys unti I the desired setting appears
in the viewfinder and data panel.
NOTES · Before exposure, shifted settings are held for ten seconds after lifting finger from operating button . After exposure, program shift is cancelled as soon as finger is lifted from operating button . To make several exposures using the same settings, keep finger on operation button between exposures. · When using zoom lenses, shift program after zooming. When zooming from 70mm to 210mm, for example, the program changes from Standard to Tele, and the shifted settings will also change.
24
PROGRAM
350
PROGRAM
125
i I 3.5 Fll.Mn IU SCS.T.
PROGRAM::
500
~ S ‘lM .n
In 1.1
IU
C S.T.
25
APERTURE -PRIORITY (A) MODE
To set mode:
I D D D VJ ~GI
~~
LO ~ ~ A
5u”u”
~ 12 5 C S.T.
C10D”1 -jJ
– …..
II
While press ing MODE key, press either of the shutter speed keys until “A” appears in the data panel. A triangular indicator appears next to the aperture setting to show that it can be set manually.
To set apertu re: Press aperture or shutter speed keys until desired aperture
is
shown in data panel. Each time you press the key , aperture changes by a half-
stop . Aperture changes rapidly when key is held down .
· Any available aperture from the aperture range indicated on the front of the
lens can be set. The AF 50mm/1 .7 lens is marked 1: 1.7 (22) indicating a
range of f/1 .7 to f/22 .
NOTES · Shutter speed blinks when the speed needed is outside the coupled
range . If “2000” blinks , set smaller apertures until blinking stops. If
“30”” blinks, set a larger aperture until blinking stops. · If light level is
outside the metering range, · blinks in viewfinder as a warning that exposure
may not be correct.
26
Selecting an aperture In A mode, you can set the aperture required
by the subject or effect desired. For further information about creative
aperture control, refer to page 40.
For taking good pictures with utmost ease, simply set the aperture as
indicated in the table. These settings wi II provide as much depth of field
(p.46) as practical while using shutter speeds fast enough for hand-held
pictures.
Sunny
Hazy sun
Heavy overcast
Indoors
-.- ISO
~ , I ”
” I’
£0 ~
25/15° f/S 64/19° f/S 100/21° f/ll 160/23° f/ll 200/24° f/11 400/27° f/16
f/4 f/4 f/5.6 f/S f/S f/ll
f/2 f/2 .S f/4 f/5 .6 f/5.6 f/S
f/1.7 f/1.7 f/1.7 f/2 f/2 f/2 .S
27
SHUTTER-PRIORITY (S) MODE
To set mode:
I n n n VJ ~ G1~
C5 G5·
c:ID::J”‘=’ ~
~
:;
LOCK ON .,1)
~
~1.j)
To set shutter speed : Press shutter speed or aperture keys until desired
speed is
shown in data panel. Each time key is pressed, speed changes by one stop. When
e ither key is held down, speed changes rapidly .
· Any available shutter speed from 30 sec. to 1/2000 sec. can be set.
· Came ra’s X·sync speed , 1/100 sec ., can also be set .
While pressing MODE key, press either of the shutter speed keys until “S” appears in the data panel. A triangular indicator appears next to the shutter speed setting to show that it can be set manually.
NOTES
· Do not use “bulb” setting which appears after the 30·sec. setting. “Bulb”
should only be used in M mode . · If lens’ maximum aperture (e.g ., f/ l.7)
blinks, set slower shutter speeds until blinking stops. If minimum aperture (e
.g., f/ 22) blinks, set faster shutter speeds until blinking stops. · If light
level is outside the mete ring range, · blinks in view· finder as a warning
that exposure may not be correct.
28
METERED MANUAL (M) MODE
To set mode:
To set aperture and shutter speed: Aperture and shutter speed are set
independently of each
other by pressing the appropriate shutter speed/aperture keys. Any combination
of available settings can be used.
While pressing MODE key, press either of the shutter speed keys until “M” appears in data panel. Triangular indi cators appear next to shutter speed and aperture settings to show that both can be set manually .
To adjust exposure: LCD pointers in the viewfinder let you fine-tune the
correct
exposure or vary exposure for creative effects.
When both pointers appear,
exposure is correct within ±1/ 4 M
stop.
·… , -,,-
IC ‘:1
_’:I.!.’.:I
When only the upper pointer
(A) appears, exposure is 1/4 M
stop or more above normal.
· ,- ,-f
CI!..I
_’:I.!.’.:I
When only the lower pointer (~) appears, exposure is 1/4 stop or more below normal.
… -,,- ,-,
M C ‘:I!..I
,- ,-
‘:1.0
NOTE If light level is outside the metering range, · blinks in view-
finder as a warning that exposure may not be correct.
29
APERTURE AND SHUTTER SPEED SETTINGS
22 19 16 13 11 9 .5 8 6 .7 5.6 4.5 4 3 .5 2 .8 2.4 2 1.7
30
Aperture settings
2000
Table at left shows aperture settings that are displayed in P and A for the 1500
50mm f / l .7 lens . Numbers such as 6 .7 and 9.5 are half-stop settings between
1000 750
whol e f-stops. Thus , for example, the half-stop setting between f / S and f i ll is 500
f /9.5.
350 250
180
Shutter speed settings
125
Table at right shows shutter speed settin gs that are displayed in P and A
100 60
modes. In M and S modes, only the speeds in bold type can be set. Numbers 45
such as 750 and 350 are half-stop indications between standard shutter
30 20
speeds. Thus, for example, the half-stop indication between 1/1000 sec. and 15
1/500 sec. is 1/750 sec.
10
Indicati ons for speeds from 1/2000 sec. to 1 sec. are : 2000 = 1/2000
8 6
sec ., 1000 = 1/10:)0 sec., etc . Speeds from 0.7 sec. to 30 sec. are indicated : 4
0″ 7 = 0 .7 sec ., 1″ = 1 sec., 1″5 = 1.5 sec ., etc .
3 2
0 “7
NOTE
1” 1″5
“Bulb” setting should be used only in M mode .
2″
3″
4″
6″
8″
10″
15″
20″
30″
bulb
DRIVE MODE SELECTION
The Minolta MAXXUM features two drive modes: “S” drive for single-frame
advance and “C” drive for continuous advance . ” S .T .” is the indication for
self-timer . Refer to page 48 for information about self-timer operation . ·
In single-frame mode, f ilm is advanced one frame after each exposure, and the
camera is always ready for the next shot . · In continuous mode, just hold the
operating button down to capture fast-action sequences at up to two frames per
second. To set drive mode:
While pressing drive mode (DRIVE) key, press either of the shutter speed keys
until a small bar appears above the desired mode .
31
FOCUSING
To autofocus with single-frame advance:
1. Set focus mode switch to AF and drive mode to “S” .
2. Center focus frame on subject. 3. Press operating button halfway. The camera automatically focuses lens . The green focus signal in the viewfinder glows (and camera beeps at -I)) position) when subject is in focus .
4. Focus is held as long as operating button is kept pressed. If desired, you can recompose the picture with the subject anywhere in the frame. 5. To release the shutter, press operating button all the way down.
32
To autofocus with continuous film advance:
To prevent out-of-focus pictures, the shutter will release only when the subject appearing in the focus frame is in focus_
1. Set focus mode switch to AF and drive mode to “C”.
2. While keeping the focus frame centered on the subject, press operating button all the way down. Camera will continuously focus and release the shutter as long as operating button is pressed .
NOTE If illumination is too low or
if subject cannot be autofocused, both red focus signals will blink to
indicate that manual focusing is necessary _ ~-
Focus signals during autofocusing Too close to subject
In focus
Focus manually on Acute-Matte screen
–
__~3
To focus manually with focus signals :
1. Set focus mode switch to M . 2. Center focus frame on sub- 3. Touch operating button to
ject.
activate focus signals .
Focus signals during manual focusing
Turn focusing ring to the right In focus Turn focus ing ring to the left
-· —·
Focus manually on Acute -Matte screen
34
4. a. The red triangular LEOs in the viewfi nder wi II light to indicate which way to turn the lens. Turn the focusing ring until the green circular LED glows.
b. Blinking of both red LEOs indicates that the sub· ject cannot be focused with signals, but must be focused visually using the Acute· Matte focusing screen . Turn focusing ring until subject appears sharpest in the viewfinder.
5. Press operating button all the way down to release the shutter.
35
Autofocusing in special situations
I-
I
I_ I-
I I
1 __
~
~
F: ~ft r~ -: ~ ~
V ~ k j
1# Cr
~
I/ ~’/
‘.
l-
k’
r;
Ij.
~
~
f-‘
~
t~ -1t~ “-“”
r~ ..:
A
B
c
In s ituations where red LEDs blink or the green LED grows but the subject does not appear sharp, additional care sho uld be t aken to ass u re accurate focus: · If subject contrast is too low (A), us e focushold to lock focus on another subject at the sa m e di stance, then recompo se photograph and re lease shutt e r. · In cases w here two subj ects are at different distances within th e focu s fra me (B) or where parallel lines interfere with autofocu sing (C), focus manually on Acute-Matte screen.
· Wh e n light is too low fo r th e autofoc us system to respond, a Minolta MAXXUM Flash can be used. · For extre mely bright subjects, using a ne utr a l-densi ty filt er is recomm e nd ed .
36
TAKING PICTURES
A.
B.
To obtain sharp, blur·free photos, hold the camera as still as possible and steady it against your face or body. Press the operating button gently with a slow, steady squeeze-never a quick jab.
Two recommended ways of holding the camera are shown here. If you grasp the camera firmly with your right hand on its handgrip, you can shift it back and forth for horizontal (A) and vertical (B) pictures without removing your hands from the controls. When autofocusing, be sure not to hold focusing ring.
37
REWINDING AND UNLOADING FILM
To rewind and unload film:
~ .It
mt=’C _/ u S C S .T.
c
LOC
~
After the last frame, “F I LM” and frame number blink (and camera beeps at _.,) position). To prevent double exposures or damage to the film, the shutter locks, and exposure settings disappear until film is fully rewound.
1. While pressing rewind release (R), slide rewind switch to left. (It stays in this position; you need not hold it.) During rewinding, “F ILM” blinks.
2. After rewinding, “FILM” continues to blink and “0” appears in frame counter. Open back cover and remove film.
NOTE
If rewinding stops before “0” appears, do not open back
cover. Slide main switch to LOCK, insert fresh batteries, and slide
38
switch ON to finish rewinding .
FLASH PHOTOGRAPHY
For daylight fill-flash or in low light, a Minolta MAXXUM Flash unit can be
attached to the camera’s accessory shoe With this unit and your Minolta
MAXXUM, flash photography is as simple as available-light photography TTL
(through-the-Iens) metering controls exposure in all modes . LEOs in the
viewfinder and on the flash unit keep you well informed during operating.
For further information, refer to the owner’s manual for the flash unit.
39
CREATIVE APERTURE CONTROL
A. Large aperture
B. Small aperture
Sometimes you may want to set the lens aperture to obtain a certain effect, such as making a large part of the scene sharply focused or emphasizing a subject against an out-of-focus background. In A mode, once desired aperture is set, the camera will automatically select the proper shutter speed.
Large aperture (small f -numbers) yield a shallow field of sharp focus (photo A). Small apertures (large f -numbers) give greater depth of field (photo 8). To determine approximate depth of field , use the depth-of-fie ld scale marked on the lens (see p. 46).
40
CREATIVE SHUTTER SPEED CONTROL
A. Fast shutter speed
B. Slow shutter speed
At other times, the subject or effect you want may require a certain shutter speed. If so, press the shutter speed keys until the desired speed is indicated in the data panel. In shutter· priority mode, the correct aperture for normal exposure will be automatically selected by the camera.
Fast shutter speeds , such as 1/500 to 1/ 2000 sec., can be used to “freeze” action (photo A) . Slow shutter speeds, such as 1/ 15 sec . or slower, can be used to emphasize subject flow or motion (photo B) .
41
AE LOCK
To operate:
–
–
–
— – –
~
CJ
I p ;,:’:’ ::.:’
The AE (auto-exposure) lock is used to obtain proper exposure in high-contrast lighting situations where the subject is on the edge of the frame or occupies only a smal l part of the center . A detailed explanation of when to use AE lock is given on page 44. ,_ Shift camera’s position so subject fills most of the frame. For smaller subjects, you may need to move closer (or zoom in) . 42
2. With meter on, press and hold AE lock (AEL button). 3. While keeping it
pressed, recompose picture, focus, and release the shutter.
NOTES · Ap erture and shutter speed can be changed while AE lock is engaged. ·
AE lock will not operate in M mode.
EXPOSURE ADJUSTMENT
Exposure adjustment can be used to deliberately increase or decrease exposure
from the normal metered value. Adjustment range is from +4 to -4 stops in
half-stops .
Exposure adjustment can also be used for flash exposures with the MAXXUM Flash
units.
To set:
· Each time shutter speed key
is pressed, setting changes by one half-stop.
· Whenever exposure adjustment is set, “+” or “_” symbol appears in viewfinder
and data panel. · Adjusted value can be checked by pressing the exposure
adjustment key .
1. While pressing exposure adjustment (+/ -) key, press the shutter speed keys unti I desired value appears in data panel. Set minus (-) numbers to decrease exposure and plus (+) numbers to increase exposure.
In P mode, both aperture and shutter speed change ; in A mode, shutter speed
changes; in S mode, aperture changes. In M mode, indicated exposure includes
exposure adjustment.
NOTES · Reset exposure adjustment to “0” after use. · When using the R60 (red)
filter, adjust exposure +1.0 stop.
43
WHEN TO USE AE LOCK AND EXPOSURE-ADJUSTMENT CONTROL
The following suggestions will help you choose when to use AE lock or exposure
adjustment . Individual conditions and taste will , of course , determine
which exposure is best.
· For scenes where there is a great brightness difference between the subject
and background, and the most important area is considerably darker than the
surrounding area: The AE lock can be used to hold the meter reading made with
the camera positioned so subject fills m.ost of the finder. Alternatively, an
exposure adjustment between +0 .5 and +2.0 stops can be set, depending on
lighting conditions. Either method will tend to give proper exposure of the
main subject. The example photos were taken with strong backlighting and no
fill -in illumination (photos A and B).
· When the most important subject area is much brighter than the rest of the
picture, use AE lock or set exposure adjustment between -0.5 and -2.0 stops,
depending on lighting conditions. Examples are subjects against a very dark
background that are illuminated by bright sunlight or a spotlight (photos C
and OJ.
· For scenes where most of the tones are very light, such as snow-covered
hillsides , an adjustment of +0.5 to +2 .0 stops may be necessary. Similarly,
an adjustment of -0.5 to -2.0 stops can be used when the overall scene is
composed of mostly darker tones.
· Exposure adjustment can also be used to “bracket” a series of exposures
differing by a half-stop or more each. This is especially useful when you are
not sure which exposure will look best, as when photographing a sunset.
44
A . Without AE lock or exposure adjustment
B. With AE lock or exposure adjustment
c. Without AE lock or exposure adjustment
D. With AE lock or exposure adjustment
45
DEPTH OF FIELD
L - _ ~
A.
Wheh a lens is focused on a subject, there is a certain range behind and in
front of the focused point that appears sharp. This range is called “depth of
field”, and it varies according to the aperture set : Large apertures (e.g.,
f/4) yield a shallow field of sharp focus, rendering the background and
foreground out of focus (example A); small apertures (e .g., f/ 22) yield
greater depth of field with more of the scene in focus (example B). Refer to
the depth·of·field scale on the lens to check approximate depth of 46 field .
B.
Depth of field also varies with subject distance: When the lens is focused on
a close subject, depth of field is less; when focused on a distant subject,
depth of field is greater . At the same aperture and subject distance, depth
of field varies with the focal length being used: Use shorter focal lengths,
such as 24mm or 28mm, for increased depth of field; longer focal lengths, such
as 135mm or 300mm, for less depth of field.
TIMED LONG EXPOSURES (“bulb” setting)
II I lr~ I ~Gf
– – – -MbuL b-
~ C0:J
~
~b) ~
, s C ST
i~
‘-
V
With camera in M mode, press the left shutter speed key unti I “bulb” appears
(after” 30″ “) . · Shutter will remain open as long as operating button is
pressed . · Elapsed exposure time (in seconds) is shown in the frame
counter. After “99” seconds, counter returns to “0” and continues counting .
After exposure, frame number is displayed. · To avoid shaking the camera, the
optional Remote Cord RC1000S or RC -l 000L can be used to release the shutter.
NOTES · Self-timer operation is not possible at “bulb” setting . · The maximum exposure time depends on battery capacity: With fresh, AAA-size alkaline- manganese batteries, it will be approx. 4 hours. With AA-s ize alkaline- manganese batteries in the optional Battery Holder BH -70L, approx. 9 hours . · If battery power decreases during exposure, the mirror will lock in the up position. To return it to down position, set main switch to LOCK, replace batteries, and slide main switch ON. · To use eyepiece cap, refer to page 50.
47
SELF-TIMER OPERATION
To use self-timer:
The electronic self-timer can be used to delay shutter release for ten
seconds. Film is automatically advanced one frame after exposure.
1. While pressing DRIVE key, press either of the shutter speed keys until a bar appears over “S.T.” in data panel. 2. Set camera to desired exposure mode.
3. To focus, press operating button halfway.
48
To cancel operation:
If you have started the self·timer and want to cancel it before the shutter
releases, press the DRIVE key .
4. When green LED in view· finder glows , press operat ing button all the way down .
5. The se lf·timer LED on front of camera blinks during the 1Q·second countdown . Frame counter displays remaining seconds until shutter release (and camera beeps at .’1) posi tion) .
NOTES · Eyepiece cap should be sl ipped over eyepiece frame when using self·timer . · After using self·timer, be sure to set camera to either “S” or “C” drive mode .
49
Eyepiece cap
The eyepiece cap slips on over the eyepiece frame . It should be used when the
eyepiece is not shielded by your head, as in remote-control photography,
“bulb” operation, or when using the self-timer. This will prevent stray light
from entering through the eyepiece and affecting exposure.
The eyepiece cap threads onto the camera strap to keep it handy.
Mounting camera on tripod
To prevent blu r when exposure times are too long for handholding the camera,
mount it on a tripod using the socket on camera bottom.
The optional Remote Cord RC-l000L or RC-l000S can be used to release the
shutter without shaking camera .
NOTES · Do not use excessive force when attaching the camera to tripod . ·
Mounting screw should not be longer than 5.4mm (1/4 in .).
50
OTHER FOCUSING METHODS
Distance scale
Infrared index
Film-plane index
I I 5 ? 10 20 ex> It
1.5 2 3 5
m
I
~I
2216 84 1622
You may f ind that in the following situations it is easier to manually set focus to a specific distance : · When taking long exposures where it is too dark to focus visually . · When you want to prefocus the lens at a certain distance and release the shutter as the subject reaches that spot.
For proper focus when using infrared film, focus subject as usual and attach a filter, if desired. With focus mode switch at M, turn focusing ri ng unti I distance shown opposite the distance index with the infrared index.
This symbol indicates the position of the film ins ide the camera. It is used for measuring the film -to-subject distance, as when taking photographs at high magnifications .
51
J
ACCESSORIES
MAXXUM Flash 4000AF The MAXXUM Flash 4000AF combines all
the features of the 2800AF with its own unique capabil it ies .
It features a powerful maximum guide number of 131 in feet at ISO 100,
adjustable in 6 steps. When using a lens set at f / 1.7, maximum flash range
is 77 feet. The power zoom head automat ically adjusts flash coverage for
focal lengths from 28mm to 70mm, even
0
while zooming . It can also be tilted 90 up and 1800 side-to-side for bounce
-flash photography . To keep you informed, an LCD data panel continuously
displays a full range of exposure-related information .
52
MAXXUM Flash 2800AF The MAXXUM Flash 2800AF is so versa –
tile and easy to use that you’ll want it handly day and night.
It features a max imum guide number of 92 i n meters at ISO 100. The maximum
flash range is 54 feet when using a lens set at f / 1.7 . In daylight, fill-
flash is automatic in program mode. Other features include : a built-in AF
illuminator for autofocusing, automatic X · sync, Direct Autoflash Metering
(TTL off-thefilm) that operates in all modes, and thyristor circuitry for high
-speed recycl ing with maximum battery life.
53
Control Grip CG-1000 Set The Control Grip CG-1000 attaches
cordlessly to the MAXXUM 7000 and accepts either the MAXXUM Flash 4000AF or
2800AF. Its battery pack holds six AA·size batteries and delivers the
additional power needed to reduce recycl ing time for sequential shooting.
When two MAXXUM Flash units are used, lighting-ratio control is automatic.
Included in the CG-1000 set are an AF illumi· nator AI -1OQO and 16.5 ft.
Extension Cable EC-1000.
54
Program Back Super 70 and Program Back 70 Either of Minolta’s Program Backs
can be
attached cordlessly in place of the MAXXUM 7000’s standard back. Film speed
for data imprinting is set automatically by the camera.
Program Back Super 70 features : Seven exposure modes, including three
userselectable exposure programs; automatic bracketing of up to 9 exposures;
an intervalometer with settings for start time, length of interval, number of
exposures per interval, and number of groups of exposures; concealed data
imprinting of exposure data, consecutive and fixed numbers, date, or time
along edge of frame; and a metering memory that stores up to 8 readings from
the camera’s built-in meter.
Program Back 70 enables imprinting of time (with day), year/month /day in any
of three orders, consecutive numbers, or fixed numbers. When desired,
imprinting can be combined with its intervalometer and longexposure functions.
55
MAXXUM AF lenses Instead of one or two basic types , you can
choose from twelve premium lenses 24mm to 300mm . Included are five macro-
zooms covering focal length s from 28mm to 210mm . Besides the most advanced
electron ics ever available in interchangeable len ses, a number of optical
innovations make for optimum results with high -speed autofocusing .
The ultra-compact AF 35-70mm Zoom or th e AF 28-135mm Zoom are two excell ent
choices for shooting both landscapes and portraits with equal ea~ . Whether
you choose a single zoom lens or the entire system, you ‘ ll benefit from
Minolta’ s leade rsh ip in autofocus technology .
56
CJ
TypeG
T
f
T
Type L
Type S
User-changeable focusing screens The MAXXUM’s standard focusing screen is
designed specifically
for MAXXUM’s high -tech autofocus system . Users can replace this screen w ith
any of three additional Acute-Matte screens. Tweezers are supplied with each
screen, and replacement is quick and simple .
Type G : Standard screen: focus frame centered in matte field
Type L: Matte field with grid ; for general and architectural photography
Type S: Vertical and horizontal scales ; for macro- , micro-, and
astrophotography
Type PM: Spl it-image/ microprism / matte-field; autofocus zone along spl it-
image
Type PM
57
Wireless Controller IR-1N Set The Wi reless Controller IR-1 N Set perm its
cordless, remote-
control photography from up to 60 meters (approx. 200 ft.) away . The receiver
senses infrared pulses from the transmitter and releases the shutter for
single-frame or continuous operation. Separate receivers can be used for
remote control of up to three cameras.
Remote Cord RC-1000L and RC-1000S A remote cord should be used for long
exposures (at “bulb”
setting) or anytime you want to release the shutter without shaking the
camera. Autofocusing and metering are both activated by partially depressing
the release button . Pressing and sliding the release button locks the shutter
open for long exposures. RC-1000L is 5m (16-1 /2 ft.) long, RC-1000S is 50cm
(approx. 20 in .) long .
58
Battery Holder BH-70L and External Battery Pack EP-70
Battery Holder BH -70L replaces the standard battery holder and delivers the
needed power for shooting many rolls of film in a short period of time.
When you plan to use the camera in very cold weather, the External Battery
Pack EP-70 can be used . This pack can be slipped into your pocket to keep the
batteries warm .
The BH-70L and EP-70 both use four AA-size batteries, eithe r alkaline-
manganese or rechargeable nickel-cadmium .
Eyepiece Corrector 1000
000
000 000
Nine eyepiece correction lenses are available for the MAXXUM. They permit adjustment from -4 to +3 diopters and are very useful for near- or farsighted photographers. Co rrectors snap into the camera’s eyepiece frame .
59
Filters Autofocusing can be used with these Minolta
filters : L37 (UV) , Y52 (yellow), GO (green), 056
(orange), R60 (red), 1A and 1B (skylight) , Minolta Portrayer.
Minolta Polarizing (Circular) Filter Autofocusing wi ll not work when a
regular
polarizing filter is attached to the MAXXUM 7000 ‘ s len s. Instead, the
Minolta Polari zin g (Circular) Filter should be used. This filter is
specifically designed for use with autofocus cameras and oth er cameras with
semi-silvered mirrors, but can also be used with manual-focus cameras . It
reduces or eliminates reflections from glass, water, etc.
Other filters Autofocusing may not be accurate when
using other filte rs. In this case, focus manually with the filter attached .
Other Minolta Accessories The following Minolta System accessories
can be used with the MAXXUM 7000 : Angle Finder VN, Magnifier VN, Cable OC,
Cable EX, Cable CD, Off-Camera Shoe, filters, Wi reless Controller IR -1 Set
with optional Connecting Cord IR -1 (C) .
Minolta autoflash units All Minolta Auto Electroflash units can be
used on th e MAXXUM 7000 ; however, autofocusing in total darkness and certain
other features are not possible .
360PX and 132PX : FDC (flash distance check) signal does not function; all
other functions are the same.
280PX : FDC signal does not function; ” Lo” power setting cannot be used.
Macro 80PX : F DC signal does not function ; illumination lamps go out when
operating button is touched .
X-series units : TTL metering and FDC signal do not function .
60
TECHNICAL DETAILS
Type: 35mm SLR with microcomputer control of autofocus, auto multi-program,
multimode, auto film transport, and LCD data panels
Lens mount: Minolta “A”-type, self-lubricating stainless-steel bayonet;
accepts all MAXXUM AF lenses for continuous lens control by automatic
electronic-mechanical dedication
Autofocus system: Minolta’s TTL phase-detection type with 8-bit microcomputer
for direct, digital adjustment
Sensitivity range: EV 2 to 19 at ISO 100 in ambient light
Manual focusing: By referring to focus signals (LEOs) in viewfinder, or
visually using Acute-Matte screen
Controls: Keys to set exposure mode, drive mode, exposure adjustment, and film
speed; up/down keys to select speed, aperture and to control program shift; AE
lock; program reset returns camera to P mode, S drive, and cancels exposure
adjustment.
Shutter: Electronically controlled verticaltraverse focal-plane type
Auto speeds : Stepless 1/2000 to 30 sec. with nearest half-stop setting
displayed
Manual speed : 1/2000 to 30 sec . in full-stop settings plus “bulb”
Film-speed settings: ISO 25 to 6400 in ambient light, ISO 25 to 1ooofor TTL
flash metering, both in 1/3-EV steps; auto film speed setting with OX-coded
films
Metering: TTL center-weighted averaging type; by silicon photocell on
pentaprism for ambient light; second SPC at bottom of mirror box for TTL flash
metering with dedicated flash units
61
Auto-exposure (AE) range: EV -1 to 20 with ISO 100 film and 50/1.4 lens (e.g
., 4 sec. at f/1.4 to 1/2000 sec. at f/22)
Exposure modes: Program: Both shutter speed and aperture set
according to AE program automatically selected by camera: Wide program for
focal lengths shorter than 35mm, Standard for focal lengths from 35mm to
105mm, Tele for focal lengths longer than 105mm; program changes automatically
when zooming from one range to another. A: Aperture-priority AE; any available
aperture selectable in half-stops, camera sets corresponding stepless shutter
speed from 1/2000 to 30 sec. S : Shutter-priority AE; any speed from 1/2000 to
30 sec. selectable in full stops, camera sets aperture from range available on
lens M: Metered -manual exposure; manual setting of any speed and aperture;
correct expo· sure indicated in viewfinder.
TTL flash metering: Operates in all flash modes with dedicated units
Program : Automatic setting of X-sync to 1/100 sec. (1/60 below EV 12) and
aperture ; automatic fill-in flash in bright sunlight
A: 1/100 sec. X-sync set automatically; any available aperture usable; AE lock
enables sloiNer X-sync speed through 30 sec. for balancing flash with ambient
lighting
M: Any shutter speed 1/100 sec . or slower and all available apertures usable;
speed automatically reset to 1/100 sec. at manually set speeds 1/125 sec. or
faster
Exposure controls: Exposure adjustment EV +4 to -4 in half-stops; AE lock
holds metered AE settings; program shift for temporary selection of other
programmed apertureshutter speed settings (in half-stops) for metered EV,
shifted settings held as long as meter stays on.
62
Operating button : Touch Switch activates metering and LCO displays, which
remain on for 10 sec. after finger is lifted from button; pressing halfway
activates autofocusing and focus hold ; pressing button all the way releases
shutter
Film transport: Automatic with built-in motor drive : auto threading, auto
advance to first frame, S mode for single-frame advance, C mode for continuous
advance at up to 2 frames per second, power rewinding , auto rewind stop;
advancing frame counter in data panel
Viewfinder: Eye-level fixed penta prism shows 94% of 24 x 36mm film-frame
area; magnification 0.85X with 50mm lens at infinity
Data displays: Top panel : LCOs indicate exposure mode,
program shift, shutter speed , aperture, exposure adjustment, film speed,
frame number, drive mode, self-timer operation , “bulb” operation, low batte
ry warning, over-/ under-exposure warning
Viewfinder : LCOs indicate exposure mode , program shift, shutter speed ,
aperture, exposure adjustment, film speed, low battery warning, whether light
is within metering range, over-/underexposure warn ing; LEOs indicate focus
status, if flash is charged, correct flash exposure; illuminated automatically
in low light
Power: Four AAA-size 1.5v alkaline-manganese batteries power all operations;
built-in lithium cell for memory back-up; low power indicated by blinking LCOs
; sliding main switch: LOCK, ON , and _.,) positions
Battery performance: With AAA-size alkalinemanganese (AM) batteries , 25 rolls
of 24exposure film; using optional Battery Holder BH-70L and AA -size AM
batteries, 65 rolls, AA-size Ni -Cd batteries, 20 rolls
63
Audible beeper: At al)) position , camera beeps : when subject is in focus; at
the end of the roll; during self-timer operation; and as a warning in P or A
mode when shutter speed is below : 1/ 30 sec . with focal lengths shorter than
35mm, 1/ 60 sec . with focal lengths from 35mm to 105mm, and 1/125 sec. with
focal lengths longer than 105mm.
Self-timer: Electronic with 10-second delay; cancellable; operation indicated
by 3-stage blinking LED with simultaneous audible beeping and countdown in
data panel.
Other : Front and rear handgrips, eyepiece cap, film windo.w , remote control
terminal, carry ing strap
Size and weight: 52 x 91 .5 x 138mm (2 -1/ 16 x 3-5/ 8 x 5-7/ 16 in .), 555g
(19-9/16 oz .) with out lens and batteries
64
CARE AND STORAGE
· Always keep your camera in its case with the lens capped when not in use, or
with a body cap on when a lens is not attached . · No part of the camera
should be forced at any time. · Never subject your camera to shock, high heat,
high humidity, water, or harmful chemicals. Be particularly careful not to
leave it in the glove compartment or other places in motor vehicles where it
may be subjected to high temperatures. · Never lubricate any part of the
camera body or lens . · Never touch the shutter curtains or the front inside
parts of the body or clean them with compressed air. Doing so may impair their
alignment and movement. · External camera surfaces and lens barrel but not
glass surfaces – can be cleaned by wiping with a dry or silicone-treated cloth
. · Never touch lens or eyepiece surfaces with your fingers . Whisk away loose
matter with a blower brush . To remove stubborn spots, use a sheet of
photographic lens tissue . If necessary ,
tissue may be moistened with one drop of lens-cleaning fluid. Never drop fluid
directly on glass surface. · When storing camera for a . Iong period of time,
remove the batteries and keep it in a cool, dry place away from dust or
chemicals, preferably in an airtight container with a drying agent such as
silica gel. · The operating range for the LCDs is from 20°C (15°F) to +50°C
(120°F) . At tempera tures outside this range, response time and contrast will
change , making displays difficult to read . At very high temperatures,
display may temporarily turn black . In either case, display should return to
normal after a short period of time. · The LCDs should last approximately ten
years . When replacement is needed, contact your nearest authorized Minolta
service facility. Save carton and packaging material. When shipping camera,
carefully pack it in the original carton, insure adequately, and use a
reliable delivery service.
To assure prompt service, contact your nearest authorized Minolta service
facility before shipping your camera
NAMES OF PARTS
Tripo d sock et
Rewind switch Rewind release
contacts (See also front fold -out.)
Minolto Camero Co ., ltd .
Minalta Corporation Head ONice Los Angeles Branch Chicago Branch Atlanta
Branch
Minolta Canada Inc. Head ONice Montreal Branch Vancouver Branch
Minolta Camera Handelsgesellschaft m.b.H . Minolta France S.A. Minolta (UK)
Limited Minolta Austria Gesellschaft m.b.H . Minolta Camera Benelux B.V.
Belgium Branch Minolta (Schweiz) AG Minolta SVenska AB Minolta Hong Kong
Limited Minolta Singapore (Pte) ltd.
30, 2-Chome, Azuchi-Machi, Higashi-Ku, Osaka 541. Japan
101 Williams Drive, Ramsey, New Jersey 07446,U.SA 3105 Lomila Boulevard,
Torrance, CA 90505, U.SA 3000 Tallview Drive, Rolling Meadows, IL 60008, U.SA
5904 Peachtree Corners East. Norcrass, GA 3007 1, U.S.A.
1344 Fewsler Drive, Mississauga, Onlario L4W 1A4, Canada 376 rue McArthur,
St.Laurent, Quebec H4T 1X8, Canada 1620 W 6th Avenue, Vancouver, B.C.V6J 1R3,
Canada Kurl -Fischer-Strasse 50, 0-2070 Ahrensburg, Wesl Germany 357 bis, rue
d’Estienne d’Orves, 92700 Colombes, France 1-3 Tanners Drive, Blakelands
North, Millon Keynes, MK 14 5BU, England Amalienstrafie 59-61 , 1131 Wien,
Austria Zonnebaan 39, 3606 CH Maarssenbraek, PB 264, 3600 AG Maarssen, The
Netherlands Stenen Brug 115 – 117, 2200 Antwerpen, Belgium Riedhof V,
Riedslrasse 6, 8953 Dielikon -ZUrich, Switzerland Brdnnkyrkagalan 64, Box
17074, S-10462 Siockholm 17, Sweden Room 208, 2/F, Eastern Center, 1065 King
‘s Road, Hong Kong 10, Teban Gardens Crescenl, Singapore 2260
~
=
–
~
MINOLTA
9222-2072 -61
© 1984 M in olta Came ra Co ., Ltd. under the Berne
Convention and Universal Copyright Convention
0511 -El Pr i nt ed in Japan
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>