ASD-LSFDR-12D15CC-NK LED Double Ring Semi Flushmount Installation Guide
- June 16, 2024
- ASD
Table of Contents
ASD-LSFDR-12D15CC-NK LED Double Ring Semi Flushmount Installation Guide
- DESIGN & OPTIONS – LED DOUBLE RING SEMI-FLUSHMOUNT has a modern, multipurpose design and a stylish look with efficient lighting. It provides smooth dimming capabilities ranging from 10% to 100% with modern LED dimmers. This fixture also includes a color selectable option, allowing you to choose either 3,000K, 4,000K or 5,000K with a simple switch. The 120° beam angle grants you smooth and even lighting. This fixture comes in a 12″ size with either a BRONZE or BRUSHED NICKEL finish.
- INSTALLATION – Installation is quick and easy: just attach the fixture base to the outlet box, connect the wires and fix the lamp body to the fixture base using hanging bars. Screws, wire nuts and all installation accessories are provided. Refer to install instructions for detailed steps.
- APPLICATION – The LED DOUBLE RING SEMI-FLUSHMOUNT provides bright, yet smooth lighting for your family room, bedroom, hallway, corridor, or any other common area in your living space. It can be used as an additional light to an already existing ceiling light as well. This fixture is also Damp Locations rated.
- ENERGY SAVINGS & EFFICIENCY – With a lifespan of 50,000 hours, these fixtures are made to last decades under normal operation! This fixture can cut your electric bill by up to 80% instantly and will save you a significant amount of money in its lifetime.
- CERTIFICATION & WARRANTY – Buy with confidence: ASD provides a 5-year warranty along with ETL certification to guarantee top quality products and safety!
ORDERING INFORMATION
PRODUCT SPECIFICATIONS:
PACKAGE CONTENTS:
INSTALLATION GUIDE
IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it.
⚠ WARNING
RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation
instructions. Keep or give to the owner for future reference. Risk of cuts:
Wear gloves to prevent cuts or abrasions when removing from carton, handling,
installing, and maintaining this product. Risk of electric shock: This product
must be installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product and the
hazards involved. Risk of Fire: Minimum 194°F supply conductors. Consult a
qualified electrician to ensure correct branch circuit conductor. ASD® assumes
no responsibility for claims arising out of improper or careless Installation
or handling of this product.
ELECTRICAL SCHEMATIC DIAGRAM:
INSTALLATION STEPS:
- Unscrew the three cap nuts counter-clockwise, remove metal ring and the lens. Attach the rods to the fixture body. Attach the canopy to the rods using flat washer, ground wire washer, star washer and secure with hex nut.
- Attach the crossbar to the outlet box using screws. Pull out the supply wires from the outlet box. Pull the fixture wires through the rods. Connect the wires: Black to Black, White to White, Ground to Ground. Tuck all the wires back into the outlet box. Place the canopy so that the mounting nipple protrudes through the middle hole. Tighten the cap nut.
- Choose needed color temperature by adjusting the switch. Secure the lens and metal ring with three cap nuts.
For most up-to-date spec sheets please refer to asd-lighting.com
ASD LIGHTING CORP E-mail: orders@asd-lighting.com
Web site: www.asd-lighting.com
For most up-to-date spec sheets please refer to asd-lighting.com