JBL Quantum Stream Talk User Guide

JBL Quantum Stream Talk

Specifications:

• MICROPHONE:
  • Power required/consumption: Not specified
  • Sample rates: 44.1kHz/48kHz/96kHz
  • Bit rate: 16/24 bits
  • Capsules: Not specified
  • Polar patterns: Supercardioid
  • Frequency response: 50 Hz – 12 kHz
  • Sensitivity: 0 dB = 1 v/Pa)
  • Maximum SPL: 110 dB
• HEADPHONE AMPLIFIER:
  • Impedance: 16 Ohm/32 Ohm
  • Power output (RMS): 23 mWrms per channel (load = 32 Ohm)
  • THD: Not specified
  • Frequency response: Not specified
  • Signal to noise: Not specified
• DIMENSIONS – MIC WITH STAND:
  • Dimensions (L x W x H): Not specified
  • Weight: Not specified

Product Usage Instructions

Connection:
The JBL Quantum Stream Talk microphone can be connected to various devices using the following ports:

• 3.5mm headset port for PC, Mac, PlayStation, and Nintendo Switch.
• USB-C port for PC, mobile, laptop, and Nintendo Switch.

First-Time Setup on PC:

1. Connect the microphone to your PC via a USB connection.
2. Go to Sound Settings -> Sound Control Panel.
3. Under Playback, highlight JBL Quantum Stream Talk and set it as the Default Device.
4. Under Recording, select JBL Quantum Stream Talk as the Default Device.
5. Follow the onscreen instructions to customize your sound settings.

First-Time Setup on Mac:

1. Connect the microphone to your Mac via a USB connection.
2. Go to the Apple menu and select System Preferences.
3. Under Output, choose JBL Quantum Stream Talk for sound output.
4. Under Input, select JBL Quantum Stream Talk for audio input.
5. Follow the onscreen instructions to customize your sound settings.

Mute/Unmute:
To mute or unmute the microphone, use the dedicated controls on the device.

Headphone Volume/Microphone Gain:
To adjust headphone volume or microphone gain, use the respective controls on the device. Follow the guidelines provided for optimal settings.

Frequently Asked Questions (FAQ):

• Q: What software do I need to access all features of the JBL Quantum Stream Talk?
  A: You need to download JBL QuantumENGINE from JBLquantum.com/engine to gain full access to features such as EQ settings on your PC.

• Q: What are the compatibility requirements for using the JBL Quantum Stream Talk?
  A: The device is compatible with Windows 10 (64-bit only), Windows 11, PC, Mac, PlayStation, Nintendo Switch, mobile devices, and laptops. Ensure you use the original cables for the best performance.

• Q: How can I customize my sound settings on the JBL Quantum Stream Talk?
  A: You can customize sound settings by following the onscreen instructions provided for your specific device (PC or Mac) during the initial setup process.

JBL QuantumENGINE
ON YOUR PC, download JBL QuantumENGINE from JBLquantum.com/engine to gain full access to features on your JBL Quantum Stream Talk, such as EQ settings.

Software requirements

Platform:
Windows 10 (64-bit only) / Windows 11 500 MB of free hard drive space for installation

• Always use the latest version of Windows 10 (64 bit), Windows 11 for the most optimal experience on JBL QuantumENGINE

WHAT’S IN THE BOX

OVERVIEW

1. Ring LED (Mute/Unmute/Volume Indicator)
2. Rotary Joint
3. VOLUME KNOB (MIC MUTE/UNMUTE + HEADPHONE/MIC VOLUME)
4. USB-C Port
5. 3.5mm Headset Port

Connection

First Time Setup on PC

1. Connect the microphone to your PC via a USB connection.
2. Go to “Sound Settings” -> “Sound Control Panel”. 4c Under “Playback” highlight “JBL Quantum Stream Talk” and select “Set Default” -> “Default Device”. Note: By default, all sounds will be played through the JBL Quantum Stream Talk microphone and heard through headphones connected to it. To hear sound from the PC directly, select the PC sound card as the default device.
3. Under “Recording” highlight “JBL Quantum Stream Talk” and select “Set Default” -> “Default Device”.
4. Follow the onscreen instructions to personalize your sound settings.

First Time Setup on Mac

1. Connect the microphone to your Mac via a USB connection.

2. Go to the Apple menu and select “System Preferences”.

3. Under “Output” select “JBL Quantum Stream Talk” for sound output.
   Note: By default, all sounds will be played through the JBL Quantum Stream Talk microphone and heard through headphones connected to it. To hear sound from the Mac directly, select the built-in speakers.

4. Under “Input” select “JBL Quantum Stream Talk” for audio input.

5. Follow the onscreen instructions to personalize your sound settings.

MUTE/UNMUTE

Headphone volume/microphone gain

TECHNICAL SPECIFICATION

MICROPHONE

• Power required/consumption: 5 V = 500 mA
• Sample rates: 44.1 kHz / 48 kHz/96 kHz
• Bit rate: 16 / 24 bit
• Capsules: 6 mm Electret Condenser Microphone
• Polar patterns: Super Cardioid
• Frequency response: 50 Hz – 12 kHz
• Sensitivity: -47 ± 3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
• Maximum SPL: 110 dB

HEADPHONE AMPLIFIER

• Impedance: 16 ohms / 32 ohms
• Power output (RMS): 23 mWrms per channel (Load = 32 ohms)
• THD: <0.5% (Load = 32 ohms)
• Frequency response: 20 Hz – 20 kHz
• Signal to noise: 92 dB (A-weighted)

DIMENSIONS – MIC WITH STAND

• Dimensions (L x W x H): 10.5 cm x 10 cm x 18.6 cm / 4.1″ x 3.9″ x 7.3″
• Weight: 146 g / 0.32 lbs008

Product specifications and app screens are subject to change without notice.

References

• JBL Quantum Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>