AuthenTrend 7816 Atkey Card NFC Card User Guide

May 15, 2024
AUTHENTREND

AuthenTrend 7816 Atkey Card NFC Card User Guide
AuthenTrend 7816 Atkey Card NFC Card

  • ISO/IEC 14443 Mifare Type-A 13.56MHz contactless Smart card, without battery.
  • Dimension: 85 x 54 x 0.8mm, meet ISO/IEC 7810 spec.
  • FIDO2 CTAP2.1 certified: Device-bound (Hardware) Passkey.
    Product Overview

Recommendations

Product Overview

Applications

Installation

Initial Card

  • Except your ATKey.Card NFC card, please have below things ready
    • Windows PC (Windows 10 build 1903 or later versions, Windows 11)
    • (Contactless) NFC Card reader
    • or (Contact) 7816 smart card reader (full support for short APDU and extended APDU commands)
  • Through Windows Settings, you can do below things for your Card
    • Reset (back to factory state)
    • Setup PIN code (PIN code for fingerprint management)
    • Enroll fingerprints (max. 2x fingerprints)

Initial Card – Reset

  • Reset to factory state, it does not need user’s PIN code or Fingerprint authentication.
    Initial Card - Reset

Initial Card – Enroll fingerprints

  • PIN code authorized, then enroll or remove fingerprints.
    Initial Card - Reset

Register Card to Passkey enabled Service

One highlight before registration:

Please check and get all ATKey AAGUID from here: https://authentrend.com /atkey-fido2-security-key-aaguids/
Passkey enabled Service

Authentication as a Passkey

  • Example from Microsoft 365
    Authentication as a Passkey

  • Example from Github
    Authentication as a Pass

Visit https://authentrend.com/atkey-card-nfc/ for more information Or mail to [email protected] for advance.

Thank you!
No more phishing! Start your pass wordless login from today.

Authen Trend Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals