HELLER HBOX30 30cm Box Fan Instruction Manual Specifications
- March 19, 2024
- HELLER
Table of Contents
- HBOX30 30cm Box Fan
- Specifications
- Product Usage Instructions
- Before First Use
- Operating Instructions
- Turn On/Off and Setting the Wind Speed
- Setting the Timer
- Care & Cleaning
- Q: What should I do if there is damage to the appliance?
- Q: How do I adjust the fan speed?
- Q: Can I clean the fan while it is plugged in?
HBOX30 30cm Box Fan
Specifications
- Model: HBOX30
- Description: 30cm Box Fan
- Voltage: 220-240V~
- Frequency: 50Hz
- Wattage: 40W
Product Usage Instructions
Before First Use
Before use, remove all packaging and inspect the appliance for
any damage. If there appears to be any damage, please take the unit
back to the place of purchase for a replacement.
Operating Instructions
-
Mount the feet on the base of the fan.
-
Place the fan on a firm and level surface.
-
Ensure the fan’s rotary switch is in the ‘0-OFF’ position. Plug
the unit into the power outlet and turn the power ‘ON’. Ensure that
the plug fits tightly in the power outlet to prevent overheating
and safety hazards. -
Adjust the fan speed by turning the rotary switch to the
desired speed.
Turn On/Off and Setting the Wind Speed
To turn on the fan, turn the speed control switch to positions
1, 2, or 3 according to the desired speed. You can adjust the wind
speed by selecting these positions. To turn off the fan, switch the
control to position 0.
Setting the Timer
The fan stops automatically at the preset timer. Set the timer
to the ON position for normal operation. If set to OFF, the fan
will not operate even when switched on.
Care & Cleaning
To avoid electric shock, always switch off and unplug the fan
before cleaning. If the power cord becomes damaged, discontinue use
and seek repairs from a qualified technician.
FAQ
Q: What should I do if there is damage to the appliance?
A: If you notice any damage to the appliance, return it to the
place of purchase for a replacement.
Q: How do I adjust the fan speed?
A: Turn the speed control switch to positions 1, 2, or 3 to
adjust the wind speed of the fan.
Q: Can I clean the fan while it is plugged in?
A: No, always switch off and unplug the fan before cleaning to
avoid electric shock.
Instruction Manual
30cm Box Fan
Model: HBOX30
READ AND SAVE THESE INSTRUCTIONS
Please read and follow the instructions in this user manual even if you feel
you are familiar with the product, and find a place to keep it handy for
future reference.
For your convenience record the complete model number (located on the product
identification plate) and the date you received the product, together with
your purchase receipt and attach to the warranty and service information.
Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification
plate) is based on specific loading tests. Normal use or the use of other
recommended attachments may draw significantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should
always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
WARNING!: – to reduce the risk of fire, electrical shock or injury to persons
or property:
· Always operate the product from a power source of the same voltage,
frequency and rating as indicated on the product identification plate.
· Remove the unit from its packaging and check to make sure it is in good
condition before using. · Do not let children play with parts of the packaging
(such as plastic bags). · Close supervision is necessary when the product is
used by or near children or infirm persons. Do
not allow children to use it as a toy. · Do not operate any product with a
damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the
place of purchase for inspection, repair or replacement. · Before unplugging
the power cord, be sure to turn the power off. When touching the unit, be sure
your hands are dry to prevent electrical shock. · Never install the unit where
it is exposed to direct sunlight, excessive moisture/rain, dust and lack of
ventilation near any heat sources. · Avoid making contact with moving parts.
Never insert fingers, pencils or any other objects through the guards whenever
the power plug is connected, especially while the unit is working. · Always
place the fan on a stable, level surface when operating to prevent the fan
from overturning. Do not run the power cord under carpet. Do not cover the
power cord with throw rugs or runners. Route the power cord away from walking
paths so that nobody can trip over it. The cable should be kept away from
heat, sharp edges and oil. · To reduce the risk of electric shock, do not
immerse or expose the product or flexible cord to rain, moisture or any liquid
other than those necessary for correct operation of the product. · This
product should not be used in the immediate vicinity of water, such as
bathtub, washbowls, bathroom swimming pool etc. Where the likelihood of
immersion or splashing could occur. · Switch off and unplug from outlet when
not in use, before assembling or disassembling parts and before cleaning.
Remove by grasping the plug – do not pull on the cord. · Be sure that no other
high current appliances are plugged into the same circuit as your fan, as an
overload can occur. · Avoid the use of an extension cord as the extension cord
may overheat and cause a risk of fire. · Do not use the appliance for other
than its intended use. · Do not use outdoors. FOR INDOOR USE ONLY.
· Do not leave the appliance unattended when switched on. · Do not cover the
grill, or operate in close proximity to curtains etc. · The use of attachments
or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries. · This product is intended for
normal domestic/household use only. · Never leave a working appliance
unattended, even for a short period of time always switch it
off. Please unplug the appliance from the power supply when not in use. · Use
this fan as described in this manual. Any other uses, not recommended by the
manufacturer,
may cause fire, electric shock, or injury to persons and may void the
warranty. · This appliance is not intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety. · The installation of a
residual current device (safety switch) is recommended to provide additional
safety protection when using electrical appliances. It is advisable that a
safety switch with a rated residual operating current not exceeding 30mA be
installed in the electrical circuit supplying the appliance. See your
electrician for professional advice. · Children should be supervised to ensure
that they do not play with the appliance. · Do not leave the fan running
unattended. · WARNING: If the supply power cord is damaged, the power cord
must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard. · This product has not been designed for
any uses other than those specified in this booklet. · CAUTION: Never insert
your fingers or any other objects (hair, clothes, utensils, knives, screw
drivers etc.) into the openings of the guard or close to the blade when the
appliance is connected to the power supply. · CAUTION: DO NOT COVER the
appliance in any way in order to avoid overheating and fire. · CAUTION – RISK
OF ELECTRIC SHOCK: To reduce the risk of electric shock do not open this
device, there are not serviceable parts for customers. Please refer any
maintenance or repair to qualified personnel.
SAVE THESE INSTRUCTIONS
PARTS & FEATURES
1. ON/ OFF Control Switch 2. Speed Control Rotary Switch 3. Timer Rotary
Switch 4. Blade 5. Louvre 6. Base
BEFORE FIRST USE Before use, remove all packaging and inspect the appliance
for any damage. If there appears to be any damage, please take the unit back
to place of purchase for a replacement. OPERATING INSTRUCTIONS
NOTE: Before inserting the plug into a power outlet, make sure that the
correct voltage being used corresponds to what is indicated on the rating
label, and that the socket has an earth facility.
1. Mount the feet on the base of the fan. 2. Place the fan on a firm and
level surface. 3. Ensure the fans rotary switch is in the 0-OFF’ position. Plug the unit into the power outlet and turn the power
ON’. Ensure that the plug first tightly in the power outlet,
as loose fit may cause overheating, damage to the plug and socket, and create
a serious safety hazard. 4. Adjust the fan speed by turning the rotary switch
to the desired speed:
· 1 LOW · 2 MEDIUM · 3 HIGH
TURN ON/OFF AND SETTING THE WIND SPEED
To turn on the fan, turn the speed control switch (1) to positions 1, 2 or 3
according to the desired speed you need. By turning the switch to the
positions 1,2,3 you can adjust the wind speed of the fan. To turn off the fan,
just turn the switch to position “0”.
SETTING THE TIMER
The fan stops automatically at the preset timer. If you set the timer to “OFF”
position it will not operate even if you switch it on so keep the timer to
indication .” ON”
CARE & CLEANING
NOTE: If the power cord set of this appliance becomes damaged, discontinue
use. Repairs should be undertaken only by a qualified technician.
CAUTION: To avoid of electric shock, you must always switch off and unplug the
fan before cleaning.
· Your appliance must be switched OFF via the main power supply and unplugged,
and allow it to cool down before proceeding with any cleaning.
· Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush. ·
We recommended lightly running a vacuum cleaner brush nozzle over the fan
grille to remove
any dust or dirt that may have accumulated. · Never use flammable or abrasive
cleaning agents such as benzene or spirits to clean the
appliance. · Never immerse the appliance in water.
SPECIFICATIONS
Model HBOX30
Description 30cm Box Fan
Voltage 220-240V~
Frequency 50Hz
Wattage 40W
CUSTOMER SERVICE
Australian Customer Service GAF Control (Sales) Pty Ltd P.O Box 19 Altona
North Victoria 3025 Phone: 1300 659 489 Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au *This product may vary slightly to the product
illustrated due to ongoing product development.