ELYONA UF0096 Farmhouse Dimmable Floor Lamp Instruction Manual
- May 15, 2024
- ELYONA
Table of Contents
ELYONA UF0096 Farmhouse Dimmable Floor Lamp Instruction Manual
Please read the operating instructions before using this device for the first time and store the operating instructions for reference.
SPECIFICATION
Name: | Floor Lamp. |
---|---|
Model: | UF0096 |
Wattage: | BW*3 |
Luminous Flux : | 1800im |
Dimmable: | 5%-100% dimming |
Color Temperature: | 2200K-6500K |
‘Adapter Voltage: | DC 24V 1.54 |
Input Voltage: | 100V-240V~50/60Hz |
Protection class: | 1P20 |
Remote control distance | 15M |
INSTALLATION STEPS
How to match remote control with the lamp:
STEP 1
Load the remote control with 2×1.5V AAA battery (Battery is not included)
STEP 2
Plug the adapter into a socket and long press on the “On/Off” button and the
indicator light flicker.
STEP 3
Long press on the “On/Off” button and the flickering of the light means
matching successfully.
Increase Brightness
Decrease Brightness
Change Color Temperature
Short Press for power ON/OFF Long Press for 1 Hour Setting
Set a 1h timer Light get several flicker mean 1h timer is successful set.
Short press to turn on/off light.
Short Long press to enhance the brightness as you like.
Short/Long press to lower the brightness as you like.
Short/Long press to enhance the CCT (2200K to 6500K) as you like.
Short/Long press to lower the CCT(6500K to 2200K) as you like.
Short press to be the max brightness and CCT immediately.
Short press to enter leisure mode.
Short press to enter reading mode.
Short press to enter breastfeed mode.
Short press to enter night light mode.
Short press to enter work mode.
REMOTE CONTROL
‘The remote control’s effective distance is within 15m. It’s magnetic and you could stick itto the lamp pole.
| 1| | ON /OFF Button
---|---|---|---
2| | 1 Hour Timer
3| | Maximum Brightness/ Brightness Adjustment/ Switch Color Temperature
4| | Five Working Modes
NOTICE
This unit is suitable for installation in a dry, indoor location only.
Recommended for domestic use ONLY.
Protect the device from humidity, moisture, and high temperatures (including
direct sunlight).
Before starting the installation, shut off the power supply at the electrical
panel by switching off the circuit breaker or removing the appropriate fuse.
Cutting the power at the light switch is not sufficient to prevent electrical
shock.
DO NOT touch the light bulb with your bare hand, as the oils from your skin
can shorten bulb.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>