WORCESTER BOSCH Greenstar CDi Compact Installation Guide
- May 15, 2024
- WORCESTER BOSCH
Table of Contents
WORCESTER BOSCH Greenstar CDi Compact
Specifications
- Model: Greenstar CDi Compact
- Maximum Hot Water Output : Up to 36kW
- Central Heating Efficiency : 94%
- Dimensions : 280mm depth, fits in a standard kitchen cupboard
- Guarantee : 10 years*
Product Usage Instructions
Installation
1. Ensure the installation location can accommodate the compact size of the Greenstar CDi Compact.
2. Use the wall-mounting jig to pre-plumb all seven boiler connections, including rear piping.
3. Connect the necessary components following the provided installation manual.
Controls Setup
1. Choose and install compatible controls such as Bosch EasyControl, Greenstar Comfort, or Sense controls for optimal functionality.
2. Ensure the controls are correctly wired and set up according to the manufacturer’s instructions.
Maintenance
1. Regularly check and clean the easily accessible components like the front- facing PRV and air vent to maintain efficiency.
2. Monitor the pressure gauge on the fascia panel for any fluctuations indicating potential issues.
Troubleshooting
If you encounter any operational issues, refer to the clear display on the fascia panel for diagnostic information. Contact a qualified technician if needed.
FAQ
- Q: What should I do if the boiler displays an error code?
- A : Error codes are designed to help diagnose issues. Refer to the user manual for a list of error codes and their meanings. If you are unable to resolve the issue, contact a professional technician for assistance.
- Q: Can I install additional accessories for enhanced performance?
- A : Yes, you can opt for accessories like a DHW pre-heat accessory to improve hot water delivery. Ensure compatibility with the Greenstar CDi Compact before installation.
Greenstar CDi Compact Our most versatile combi
Punching well above its weight, the Greenstar CDi Compact is a small boiler
delivering high hot water flow rates – perfectly suited for busy homes. With
full-width rear piping as standard and a pre-plumbing jig, it’s flexible
enough for any installation.
The versatile and compact boiler choice, with enough punch for small and
medium-sized homes.
Why install the Greenstar CDi Compact?
- Terms and conditions apply, visit the website for more information.
Compact comfort
The fit-and-forget boiler which slots easily into a 300mm-deep cupboard gives
you the flexibility to meet plenty of customer demands at once.
Here’s what installers have to say…
Functionality and flexibility
- Easy access components
- A front-facing PRV, an easily accessible air vent, and a plate heat exchanger design offering single-screw removal enable straightforward access to critical components.
Flexible controls
Bosch EasyControl, Greenstar Comfort and Sense controls match the guarantee of the boiler when installed at the same time.
WB7 heat exchanger
The compact heat exchanger allows for the CDi Compact to be fitted inside a standard-sized kitchen cupboard, offering a greater surface area which delivers hot water performance and 94% central heating efficiency.
Fascia panel display
- Clear display for diagnostic, operational, and commissioning information with visible analog pressure gauge for familiarity and ease of use. Controls can fit into the middle of the fascia panel for further optimized control.
Wall-mounting jig
This feature allows installers to pre-plumb all seven boiler connections 0during installation and provides rear piping as standard. Included is a drop- lock expansion vessel which can be simply seated onto the hydraulic unit.
Pre-heat accessory
An optional accessory, the Domestic Hot Water Pre-Heat Kit allows the CDi Compact to be installed in a solar thermal system or any DHW pre-heat technology, accepting incoming pre-heated mains water up to 60° C.
The inside story
Technical data
- Or measured 170mm from the top of the boiler cabinet.
- 20mm from a removable cupboard door, 600mm from a fixed surface for servicing. Same clearances for ventilated and unventilated compartments. 450mm front clearance to a fixed surface is permitted if a) 300mm clearance on one side is guaranteed b) the bottom of the boiler is between 1000mm and 1500mm from the ground and c) 450mm front clearance is maintained from ground level to boiler.
- Minimum pressure required to achieve maximum flow rate = 1.6 bar.
Get in touch
Sales
- Tel : 0330 123 9669
- Email: sales.bosch@uk.bosch.com
Technical Helpline (Pre & Post Sales)
- Tel : 0330 123 3366
- Email: technical-advice@uk.bosch.com
Spare Parts
- Tel : 0330 123 9779
- Email: spares.mailbox@uk.bosch.com
Controls Helpline
- Tel : 0330 123 3641
Training
- Tel : 0330 123 0166
- Email: training@uk.bosch.com
- Worcester-bosch.co.uk/eacademy
Share
- We would love to see your installations!
- Worcester Bosch Professional
- @WorcesterBoschProfessional
- @WorcesterBosch
- Worcester Bosch
- WorcesterBoschHeating
Worcester Bosch
- Cotswold Way
- Warndon
- Worcester
- WR4 9SW
- Worcester-bosch.co.uk
Calls to and from Bosch Thermotechnology Ltd may be recorded for training and quality assurance purposes. Worcester Bosch is a brand name of Bosch Thermotechnology Ltd. This brochure is accurate at the date of printing but may be superseded and should be disregarded if specifications and/or appearances are changed in the interest of continued improvement. The statutory rights of the consumer are not affected.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>