AISPEECH AIMIC-M12PRO AI Conference Speakerphone User Manual
- May 15, 2024
- AISPEECH
Table of Contents
AISPEECH AIMIC-M12PRO AI Conference Speakerphone
Product Introduction
AIMIC-M12 Pro is a 360° noise-cancelling conference microphone speaker designed specifically for enterprise conference rooms by AISPEECH. It is an intelligent conference microphone speaker that combines sound collection, sound amplification, speech transcription, and subtitle simultaneous transmission. The product uses a 12-element omnidirectional microphone array and achieves a 5-meter radius omnidirectional sound collection, intelligent noise reduction, echo cancellation, real-time speech transcription, and other functions through self-developed audio algorithms.
It solves the conference pain points such as unclear remote calls, noisy environments, and difficulty in organizing meeting minutes for users. The built-in high-fidelity speakers enable users to hear clearly and maintain efficient communication. With the support of 5 units of cascading technology, this product can achieve a wider sound collection range and can be deployed in larger conference rooms. Applicable scenarios: Conference rooms of various sizes.
Product Introduction
Accessories List
Buttons and indicator lights instructions
Light colour instructions
Interface instructions
USB connection
Power on the device, and connect the device to the computer through the
attached USB cable. When you hear the prompt tone, the connection is
successful.
Bluetooth connection
Power on the device, the bluetooth name is “AIMIC-M12-****”(the last four
figures of S/N).
Bluetooth Dongle connection
Insert the Bluetooth Dongle into a PC or conference screen, activate the
Bluetooth of M12 Pro, open the Bluetooth settings page of the computer system
and select M12 Pro to connect. The device’s Bluetooth indicator light staying
on indicates a successful connection- action.
Computer bluetooth connection
After powering on the device and activating Bluetooth, then open the bluetooth
settings page on your computer. Select this device to pair and connect. The
device’s Bluetooth indicator light staying on indicates a successful
connection.
Mobile phone connection
After powering on the device and activating Bluetooth, then turn on the
Bluetooth function on your mobile phone and search for a Bluetooth device
named “AIMIC-M12- **” for pairing and connection.
Tip:** This device does not support a direct connection to the phone using
an OTG data cable.
Devices cascaded
Cascaded connection (via Ethernet cable)
- Applicable for cascade usage of two M12 devices,
- Power on and start the first device using the power adapter.
- The first device enters standby mode and the light shows green breathing status.
- power on the second device using the power adapter, and then connect it to the first device using the Category 6 Ethernet cable.
- After successful cascading, the devices enter standby mode, and the light shows a green breathing status.
Devices cascaded
Cascaded connection (via POE switch)
- Applicable for cascade usage of 2 to 5 M12 devices
- The first device is connected to the POE switch via a Category 6 Ethernet cable (included in the package), powered on and activated.
- The next device is also connected to the POE switch via a Category 6 cable (included in the package), powered on and activated.
- After successful cascading, the devices enter standby mode, and the light shows a green breathing status.
- Repeat step 4 to cascade up to 5 devices.
Devices cascaded
Master/Slave devices
- The computer is connected to any device via USB, and the connected device is the “master device”, while other cascaded devices are “slave devices”.
- The device status of the “master device” and “slave devices” are synchronized, and the button presses and light effects are also synchronized.
Note: The device that completes the USB connection first is the master device.
Basic Parameter
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Brand Owner: AISpeech Technology Co., LTD.
Email: aimic_support@aispeech.com