AISPEECH AIMIC-M6PRO AI Conference Speakerphone User Manual

AI Conference Speakerphone

User Manual

Product introduction

AIMIC-M6 Pro is an intelligent conference microphone speaker launched by AISPEECH. It’s specially designed for small collaboration rooms, small meeting rooms, open spaces, and remote office scenarios. This product integrates audio collection, amplification capabilities. It adopts a 6-unit omnidirectional microphone array and proprietary audio algorithms to achieve functions such as omnidirectional pickup within 4 meter radius, directional pickup, AI noise reduction, echo cancellation and two-way communication. It solves common pain points in meetings, such as unclear remote communication and difficult meeting summary preparation. The directional pickup function of this product provides users with exclusive pickup zones, effectively blocking all sound interference from other angles, and improving remote communication efficiency.

Applicable scenarios: small collaboration rooms, small meeting rooms, open spaces, and remote office.

Accessories List

Speakerphone                             Storage Bag

User Manual                       Bluetooth dongle

Buttons and indicator lights instructions

(1) Volume/Battery indicator
• on            ο off
Volume indicator
Maximum volume
Minimum volume
Battery indicator (short press power button)
Battery > 90%
Battery ≤ 20%

(2)   Directional Voice Pickup
Press to enable/disable
Status indicator light
Light on: enabled
Light off: disabled

Buttons and indicator lights instructions

1. – Vlume down
   Press to reduce volume

2. Microphone Mute
   Press to switch microphone status

3. Λl AI Button
   Click to start or end AI transcription

4. + Volume up
   Press to increase volume

Tip: AI transcription function needs to be used with the Mile Memo software while the device is connected to the computer via USB.

Buttons and indicator lights instructions

1. Power
   Press and hold 3 seconds to power on or power off
   Status indicator light
   Red light breathing: battery low
   White light breathing: charging
   White light on: battery full or not charging
   *The indicator light stays on when the battery is fully charged.

2. Headphone jack
   When headphone is plugged in, the device will switch audio output from the speaker to the headphone

3. Bluetooth
   Press and hold 2 seconds to pair or disconnected
   Status indicator light
   Blue light flashing: bluetooth pairing
   Blue light on: Bluetooth connected

Instruction for use

Ligth color instructions

1.Device connection

The device’s initial Bluetooth name is”AIMIC-M6 Pro****(the last four figures of S/N)”

• Bluetooth connection

1) Mobile phone connection
After powering on device and activating Bluetooth, then turn on the Bluetooth function on your mobile phone and search for Bluetooth device named “AIMIC-M6 Pro****” for pairing and connection. Or you can enable the NFC function on your phone and tap the NFC logo area on the device to connect. The Bluetooth indicator light staying on indicates a successful connection.

2) Computer connection
After powering on device and activating Bluetooth, then open the Bluetooth settings page on your computer system. Select this device to pair and connect. The device’s Bluetooth indicator light staying on indicates a successful connection.

3) Bluetooth Dongle connection
Plug in the Bluetooth dongle into the PC, conference host, or conference display. After powering on the device activating Bluetooth function,then open the Bluetooth settings page on the computer system. Select this device for pairing. The Bluetooth indicator light staying on indicates a successful connection.

* USB connection
Connect the device to computer via type-C USB data cable and you will hear a prompt tone when connected. Choose “AIMIC-M6 Pro” as input /output audio device in system setting or in the online meeting software.

Tip: This device does not support direct connection to the phone using an OTG data cable.

2. Directional Pickup

1. Press the “Directional Pickup” button to enable this function and status light will turn to green. Point the directional pickup button towards the speaker, and it will suppress all sounds outside the directional pickup fan- shaped area, prioritizing the voice within the area. The directional pickup area has an angle of +/45° with the button as the center and 1meter radius.
2. Press the “Directional Pickup” button to disable this function. The light will turn off, indicating function is deactivated.

3. Charging Instructions

* Charging

1. When connected to computer via USB cable, the device enters charging mode regardless of whether it is powered on or off.
2. If consumers use a power adapter for power supply, please purchase one which has obtained corresponding certification.

• Battery Level Check
  While the device is powered on, press the power button shortly to check the current battery level.

1. Battery<20%, the power button indicator light breath in red.
2. Battery≥20%the power button indicator light remain in white.

Note: Output power of the power supply adapter should be less than 15W.It is recommended to charge the device one hour before using it for the first time to ensure sufficient battery power.

Basic parameter

RF exposure statement
This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Brand Owner: AISpeech Technology Co., LTD.
Email:aimic_support@aispeech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>