sewoo NBS-FR85 Ring Scanner User Guide
- May 15, 2024
- sewoo
Table of Contents
sewoo NBS-FR85 Ring Scanner
V 2.0, Apr 2021 Copyright © 2021 Aroot co., Ltd. All right reserved. Aroot co., Ltd. is the designer and manufacturer of barcode scanner. The Sewoo logo is a registered trademark and symbol of Aroot co., Ltd. Features and specifications are subject to change without prior notice.
Standard Package
Ring Scanner Parts
- Trigger
- Power on
- Type-C interface charging
- Screen
- Select
Charging via Power Adapter
- Plug the USB type C cable to the USB connector on the trigger and provide power through the power supply
- Confirm the connection with NBS-FR85.
< Note > Before using NBS-FR85 for the first time, charge the scanner for at least 1 hour for stable operation.
Wearing on NBS-FR85
- Insert the end of finger strap into the hole on the single trigger
- Wear NBS-FR85 with the trigger on the index finger as the scan button facing the thumb
- Tighten the finger strap
Barcode Reading
To scan a barcode, aim the barcode while pressing the scan button on the single trigger.
Aim the barcode so the center cross is centered on the barcode, and the whole barcode is inside the rectangle.
Bluetooth Connection
There are two ways for connection between ring scanner and host device, Scan- to-Pair and Tap-to-Pair. Choose more comfortable method.
Scan-to-Pair
- Start the scanner and scan the “2.4G Wireless Pairing Mode”
- Scan “Match the Receiver” so that enters into the pairing state
Scan the barcode provided by Ring Control (Lite) to make the connection between the host device and NBS-FR85. Scan-to-Pair is supported on SPP mode only.
Regulatory
This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment if not properly disposed of. To avoid the dissemination of those substances in our environment and to diminish the pressure on natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound away. The crossed-out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You can also contact your supplier for more information on the environmental performance of this product.
Product Information
Specifications
- Model: NBS-FR85
- Type: Ring Scanner
- Connectivity: USB Dongle
- Charging Cable: Type-C
Frequently Asked Questions (FAQ)
Q: How do I charge the NBS-FR85 scanner?
A: Use the provided Type-C charging cable to charge the scanner for at
least 1 hour before initial use.
Q: How should I wear the NBS-FR85 scanner?
A: Wear the NBS-FR85 with the trigger on the index finger and position the
scan button facing the thumb for optimal usage.
Q: How do I initiate pairing with other devices?
A: Depending on the connectivity mode required, follow the instructions
provided for Bluetooth HID, Bluetooth SPP, or 2.4G wireless pairing modes as
outlined in the user manual.