CXJ C15 Drone with Dual 2K UHD Camera Instruction Manual

– CXJ C15 –
INSTRUCTION MANUAL

• Please read carefully this instruction manual before playing. Any wrong operation will damage the product as well as the injury of people. This is a sophisticated hobby product and not suitable for children below 14 years old. If you are a beginner, we advise you had better assist by an experienced person.
• This 4-axis gyro quadcopter drone can fly indoors and outdoor. But please make sure the outdoor wind force is less than three.
• The remote controller can make an alarm when the signal is too weak or low battery.

IMPORTANT INSTRUCTION

1. This product is not a toy but precise equipment that integrates mechanics and electronics with expertise in aerodynamics and high-frequency transmitting.
   It requires to be correctly assembled and debugged so as to prevent the accident from being happened. The product owner should operate or control it in a safe way. Please noted that we won’t take any responsibility for any wrong operation as it may result in severe injury or loss of property and we can not control the operating process during the time when the user assembles or use this prod is product.

2. This product is suitable to be used by people who have operating experience in flying models or age no less than 14 years old.

3. The flying ground we required should be the local field and legal for remote control flying.

4. 0nce this product is sold, we won’t be responsible for any safety responsibility during the time the user operates or uses or controls this product.

5. if there is any problem occurred during the time of using, operating or repairing, please reach our sales agent for details. The sales agent that we authorized will provide you with technical support and after-sale service.

CONTROLLER COMPONENTS

CHARGING MODE

1. Use the special charger for drones supplied by our factory for charging. Insert the lithium polymer battery plug into the charger socket, as shown in the figure.
2. To ensure safety, the charging must be carried out within the sight range.

BATTERY WARNING:
Lithium Polymer batteries can expand, burst, or catch fire if used incorrectly, causing both property damage and or personal injury. It is essential that you follow all the included instructions and safety warnings in full. The manufacturer, distributors, and retailers will assume no liability for the failure to comply with these safety instructions and warnings.

INSTRUCTIONS WHEN CHARGING:

1. The battery must be removed from the product before charging.
2. If the battery has just been used, please let it cool down to room temperature before charging.
3. Charging must only be undertaken by an Adult and only using the charger included with this product.
4. Always charge the battery on a nonflammable heat-resistant surface with nonflammable surroundings.
5. Connect the battery to the USB charging cable
6. Lithium Polymer batteries do not last forever. If your battery becomes damaged in a crash or no longer charges properly, immediately replace it with a new battery. To prolong the life of your battery, it is always best to retain a bit of charge in your battery prior to charging it.

FLIGHT ACTION ADJUSTMENT AND SETTING

Please be familiar with the simulation flight before you understand the operation of each action of the drone, it is strictly forbidden to fly the drone. Please read the instructions first, Familiar with the control of various directions, and repeat until the fingers can skillfully control various movements and directions.

1. Place the drone in an open place and aim the back of the drone at yourself.
2. Practice operating each rocker of the remote control (the operation mode of each action is shown in the figure below), and practice the accelerator repeatedly High/low,  aileron left/ right, elevator front/ rear, and rudder left/ right operation mode.
3. The practice of simulated flight is very important. Please repeat the exercise until you don’t need to think and your fingers can follow naturally Call out command movement control.

HIGH / LOW-SPEED SWITCHING

To switch the flight speed mode, click the low-speed mode, then press again to enter the medium-speed mode, Press again to enter the high-speed mode and cycle through it.

ROLL

When the basic movements are very proficient, you can play some thrilling rolling action. After flying the quadcopter to an altitude of more than 3 meters, press and hold the button (rolling button) in the upper right corner of the remote control, and at the same time move the right joystick forward/backward / Left/Right push to the highest position, the drone can realize the front/rear/left/right roll I function.
Note: When the battery is fully charged, the rollover effect is the best.

HEADLESS MODE

Press once to enter headless mode, the headless mode indicator lights. Press again to exit headless mode.
The drone defaults to the normal mode, the remote control is placed flat, and the antenna is horizontally aligned with the tail of the drone.
In the headless state, the control does not need to identify the position of the drone nose just according to the direction of the joystick of the remote control to control the drone.

ONE-KEY RETURN

Press the button, the drone enters the one-key home state, the drone will fly back in the opposite direction of the first frequency, and then press again to exit the one-key home.

TAKE PHOTOS/ VIDEO

Short press the “TAKE PHOTOS/ VIDEO” button to take a picture and then press to cancel the picture. Long press the “TAKE PHOTOS/ VIDEO” button to record, and then long press to cancel the recording.

FINE-TUNING

If the DRONE is inclined to a certain direction during flight, press the fine- tuning button to adjust in the reverse direction, and then press again to cancel the fine-tuning.

ADJUSTING CAMERA UP/ DOWN

When using the DRONE, you can adjust the camera direction by pressing the up and down buttons of the steering gear

FLIGHT OPERATION METHOD

1. Place the drone at the take-off point, turn on the drone switch, and wait for the lights to When the fast flash is changed to the slow flash, the remote control can be turned on. The indicator light of the remote control is always on, and a beep sounds, indicating that the drone has been connected. At the same time, the headlights of the drone are always on.
2. Simultaneously push the left slider of the remote control to the lower right and the right slider to the lower left to calibrate the gyroscope, When the front and backlights of the drone show a flashing state, it means that the calibration has been successful.
3. Simultaneously push the left stick of the remote control to the lower left and the right stick to the lower right to start the drone. The wind vane of the drone starts to turn slowly, press the “One-key Take-off” button, or push the throttle to start the Flying drone.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>