KROSS STUDIO Lotus Tourbillon Smartwatch User Manual
- June 8, 2024
- KROSS STUDIO
Table of Contents
KROSS STUDIO Lotus Tourbillon Smartwatch
LOTUS TOURBILLON OVERVIEW
FRONT
- Case
- Dial
- Hour hand
- Minute hand
- Tourbillon cage
BACK
- Time set push button
- D-ring crown
- Strap release push buttons “Push to release”
MOVEMENT WINDING
The manual-winding mechanical movement developed in-house delivers a 5 day
power reserve. After this period, you must wind your watch to provide the
necessary energy for it to run.
In order to maintain perfect symmetry, the Lotus Tourbillon case has no
traditional crown. On the case back, a D-ring crown is stowed out of sight to
help maintain the timepiece’s sleek, space-age styling. This mechanism enables
faster winding than with a traditional crown. To wind your watch, lift the
D-ring crown and turn it counterclockwise until you feel some resistance,
meaning that the watch has been wound.
To fully wind your watch, 23 complete turns are needed.
TIME SETTING
The hours and minutes are displayed in a unique peripheral format, made
possible by a planetary gear system that orbits 360° around the tourbillon.
To set the time, press the time set push button. Lift the D-ring crown -
located on the case-back - synchronously and turn clockwise until the exact
time is set. When setting the time, there may be some resistance as the watch
will be wound simultaneously.
Note: You might turn the D-ring crown counterclockwise. In this case, go back
10 minutes before the actual time. Then, turn it clockwise until adjusting the
exact time. It enables the gear train to go back to its functioning position.
INTERCHANGEABLE STRAPS
The Lotus Tourbillon is equipped with an interchangeable strap system, a practical feature where two quick-release buttons are hidden on the underside of the case. Push each button to release the strap.
BUCKLE OPENING
Press simultaneously the two push buttons located on the sides of the clasp to open the buckle.
BUCKLE RELEASE
To detach the buckle, no tools are required. Simply pull the lever located
under the clasp and it will release the strap.
To fix the buckle, start by inserting the right side of the buckle on the
spring bar. Pull the lever and insert the left side.
Make sure the spring bar is securely in place by pulling few times the strap.
REGULAR CARE
REGULAR CARE OF THE LOTUS TOURBILLON
The tourbillon remains one of the main horological complications and bears the
mark of the most talented watchmakers. Caution and care are required to ensure
the longevity of your watch. To handle it properly, a set of gloves and a soft
microfiber cloth are provided along with your Lotus Tourbillon watch. We
strongly recommend wearing gloves every time the watch is manipulated for
winding or time setting. It will enable a better gripping and help prevent any
risk of scratching.
The watch has a water resistance of 30 meters. We recommend avoiding sea
water.
Clean regularly your watch by wiping down carefully with the soft microfiber
cloth. If needed, you may use a solvent- free cleaner to spray on the cloth.
Do not spray any liquid directly on the watch.
TECH SPECS
LOTUS TOURBILLON
- Parts 288
- Limited Edition 18 pieces
Movement
- Caliber KS 7’000
- Functions Manual-winding central tourbillon
- Parts 210
- Jewels 27
- Power reserve 5 days
- Frequency 21’600bph / 3Hz
Case
-
Materials
Grade 5 titanium protected by a black DLC treatment
Dome-shaped anti-reflective sapphire crystal -
Water Resistance 30m or 3ATM
-
Diameter 45mm
-
Thickness 20mm
-
Thickness without crystal 12.5mm
Case Back
- Materials Grade 5 titanium 4 anti-reflective sapphire crystals
Interchangeable straps
-
Vegetal black leather lined with rubber
Grade 5 titanium deployant buckle clasp -
Black rubber
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>