KROSS STUDIO TBATT22 Batman Collector Set User Manual
- June 9, 2024
- KROSS STUDIO
Table of Contents
TBATT22 Batman Collector Set
User Manual THE BATMAN COLLECTOR SET
USER MANUAL
THE BATMAN TOURBILLON
FRONT
- Case
- Dial
- Hour hand
- Minute hand
- Tourbillon cage
BACK - Time set push button
- D-ring crown
- Strap release push buttons “Push to release”
MOVEMENT WINDING
The manual-winding mechanical movement developed in-house delivers a 5 day
power reserve. After this period, you must wind your watch to provide the
necessary energy for it to run.
In order to maintain perfect symmetry, the “The Batman Tourbillon” case has no
traditional crown. On the case back, a D-ring crown is stowed out of sight to
help maintain
the timepiece’s sleek, space-age styling. This mechanism enables faster
winding than with a traditional crown.
To wind your watch, lift the D-ring
crown and turn it counterclockwise until you feel some resistance, meaning
that the watch has been wound.
To fully wind your watch, 23 complete turns are needed.
TIME SETTING
The hours and minutes are displayed in a unique peripheral format, made
possible by a planetary gear system that orbits 360° around the tourbillon.
To set the time, press the “Time Set” push button. Lift the D-ring crown –
located on the case-back – synchronously and turn clockwise until the exact
time is set. When setting the time, there may be some resistance as the watch
will be wound simultaneously.
Note: You might turn the D-ring crown
counterclockwise. In this case, go back 10 minutes before the actual time.
Then, turn it clockwise until adjusting the exact time. It enables the gear
train to go back to its functioning position.
INTERCHANGEABLE STRAPS
The “The Batman Tourbillon” is equipped with an interchangeable strap system,
a practical feature where two quick-release buttons are hidden on the
underside of the case.
Push each button to release the strap..
BUCKLE OPENING
Press simultaneously the two push buttons located on the sides of the clasp to
open the buckle.
BUCKLE RELEASE
To detach the buckle, no tools are required. Simply pull the lever located
under the clasp and it will release the strap.
To fix the buckle, start by inserting the right side of the buckle on the
spring bar. Pull the lever and insert the left side.
Make sure the spring bar is securely in place by pulling few times the
strap.
BAT-SIGNAL
THE BAT-SIGNAL
The “The Batman” Tourbillon watch comes along with a stand alone functional
art piece made of aluminum, a illuminated Bat-Signal.
It is composed of 2 functional parts: a light and a watch case. A watch can be
stored in the back of the Bat-Signal, where a case has been ingeniously
conceived.
SAFETY INFORMATION
The Bat-Signal light is conceived for an indoor use only.
Do not cover the appliance (such as with cloths, foulard, etc.).
Use the appliance in the envisaged position.
REGULAR CARE
REGULAR CARE OF THE BAT-SIGNAL
Use a smooth microfiber cloth to clean the sculpture. Gloves are recommended
to prevent any risk of scratching. If needed, you may use a solvent-free
cleaner to spray on
the cloth. Do not spray any liquid directly on the sculpture.
REGULAR CARE OF THE THE “THE BATMAN TOURBILLON”
The tourbillon remains one of the main horological complications and bears the
mark of the most talented watchmakers. Caution and care are required to ensure
the longevity of your watch. To handle it properly, a set of gloves and a soft
microfiber cloth are provided in a box along with your The Batman Collector
Set. We strongly recommend wearing gloves every time the watch is manipulated
for winding or time setting. It will enable a better gripping and help prevent
any risk of scratching.
The watch has a water resistance of 30 meters. We recommend avoiding sea
water. Clean regularly your watch by wiping down carefully with the soft
microfiber cloth. If needed, you may use a solvent- free cleaner to spray on
the cloth. Do not spray any liquid directly on the watch.
TECH SPECS
THE BATMAN TOURBILLON
| Parts | Limited edition |
|---|---|
| 283 | 10 numbered pieces |
Movement
Caliber| Jewels
KS 7’001| 27
Functions| Power reserve
Manual-winding central tourbillon| 5 days
Parts| Frequency
205| 21’600bph / 3Hz
Case
Materials| Diameter
Grade 5 titanium protected by a blackDLC treatment| 45mm
Dome-shaped anti-reflective| Thickness
sapphire crystal| 20mm
Water Resistance| Thickness without crystal
30m or 3ATM| 12.5mm
Case back
Materials
Grade 5 titanium
4 anti-reflective sapphire crystals
Interchangeable straps
- Black calf leather strap embossed with the pattern of Batman’s armor, black stitching
- Black rubber strap, black stitching
- Red rubber strap, red stitching
All straps are reinforced with a black rubber inlay for optimal durability and
comfort
Black DLC grade 5 titanium clasp
THE BAT-SIGNAL
Material………… Aluminum
Weight……………………… 12kg
Power…………………………… 12-15W
LED………………….. 3000K (warm white)
Dimensions
Height…………………………… 325mm (12,8 inches)
Diameter……………………………. 455mm (17,9 inches)
Projector diameter……………… 205mm (8,1 inches)
THE BATMAN and all related characters and elements
© & ™ DC and Warner Bros. Entertainment Inc.
WB SHIELD: © & ™ WBEI. (s22)
TBATT22
www.kross-studio.co