KROSS STUDIO Game of Thrones – House of the Dragon Collector Set User Manual
- June 9, 2024
- KROSS STUDIO
Table of Contents
GAME OF
THRONES – HOUSE OF THE DRAGON
COLLECTOR SET
USER MANUAL
DRAGON CENTRAL FLOATING TOURBILLON
FRONT
-
Case
-
Dial
-
Hour hand
-
Minute hand
-
Floating tourbillon cage
BACK -
Time set push button
-
D-ring crown
-
Strap release push buttons “Push to release”
MOVEMENT WINDING
The manual-winding mechanical movement developed in-house delivers a 5 day
power reserve. After this period, you must wind your watch to provide the
necessary energy for it to run.
In order to maintain perfect symmetry, the GOT Dragon Central Floating
Tourbillon case has no traditional crown. On the case back, a D-ring crown is
stowed out of sight to help maintain the timepiece’s sleek, space-age styling.
This mechanism enables faster winding than with a traditional crown. To wind
your watch, lift the D-ring crown and turn it counterclockwise until you feel
some resistance, meaning that the watch has been wound. To fully wind your
watch, 23 complete turns are needed.
TIME SETTING
The hours and minutes are displayed in a unique peripheral format, made
possible by a planetary gear system that orbits 360° around the tourbillon.
To set the time, press the “Time Set” push button. Lift the D-ring crown –
located on the case-back – synchronously and turn clockwise until the exact
time is set. When setting the time, there may be some resistance as the watch
will be wound simultaneously.
Note:
You might turn the D-crown counterclockwise. In this case, go back 10 minutes
before the actual time. Then, turn it clockwise until adjusting the exact
time. It enables the gear train to go back to its functioning position.
INTERCHANGEABLE STRAPS
Each unique piece comes with two customized set of straps.
The deployant buckle clasp is in Grade 5 titanium with or without black or
brown PVD, depending on the straps and the watch.
BUCKLE OPENING
Press simultaneously the two push buttons located on the sides of the clasp to
open the buckle.
BUCKLE RELEASE
To detach the buckle, no tools are required.
Simply pull the lever located under the clasp and it will release the strap.
To fix the buckle, start by inserting the right side of the buckle on the
spring bar. Pull the lever and insert the left side.
Make sure the spring bar is securely in place by pulling few times the strap.
DRAGON EGG FUNCTIONAL SCULPTURE
The Dragon Central Floating Tourbillon watch comes along with a stand alone
functional art piece, the Dragon Egg. Made of resin and hand painted with
airbrush paint, it has been produced in collaboration with renowned french
workshop Leblon Delienne.
A watch can be stored inside the Dragon Egg functional sculpture, where two
towers maintains a watch cushion. Theses are inspired by Dragonstone castle’s
towers, the ancestral seat of the Targaryen.
We recommend to put on gloves before manipulating the functional sculpture.
GENERAL
REGULAR CARE
REGULAR CARE OF THE DRAGON EGG FUNCTIONAL SCULPTURE
Use a smooth microfiber cloth to clean the sculpture. Gloves are recommended
to prevent any risk of scratching. If needed, you may use a solvent-free
cleaner to spray on the cloth. Do not spray any liquid directly on the
sculpture.
REGULAR CARE OF THE DRAGON CENTRAL FLOATING TOURBILLON
The tourbillon remains one of the main horological complications and bears the
mark of the most talented watchmakers. Caution and care are required to ensure
the longevity of your watch. To handle it properly, a set of gloves and a soft
microfiber cloth are provided in a box along with your Dragon Central Floating
Tourbillon. We strongly recommend wearing gloves every time the watch is
manipulated for winding or time setting. It will enable a better gripping and
help prevent any risk of scratching.
The watch has a water resistance of 30 meters. We recommend avoiding sea
water. Clean regularly your watch by wiping down carefully with the soft
microfiber cloth. If needed, you may use a solvent-free cleaner to spray on
the cloth. Do not spray any liquid directly on the watch.
TECH SPECS
DRAGON CENTRAL FLOATING TOURBILLON
Parts
298| Each watch is a unique piece
---|---
Movement
Caliber
KS 7’005| Jewels
27
Functions
Manual-winding patented floating central tourbillon| Power reserve
5 days
Parts
220| Frequency
21’600bph / 3Hz
Case
Materials
Engraved grade 5 titanium| Diameter
45mm
Dome-shaped anti-reflective sapphire crystal| Thickness
20mm
Water resistance
30m or 3ATM| Thickness without crystal
12.5mm
Case back
Material
Grade 5 titanium|
Interchangeable straps
Each unique piece comes with two customized set of straps.
The deployant buckle clasp is in Grade 5 titanium with or without black or
brown PVD, depending on the straps and the watch.
DRAGON EGG FUNCTIONAL SCULPTURE
Materials
Resin
Watch cushion in microfiber cloth
Dimensions
Ø 168mm (6.6 inches)
Height with base 231.5mm (9.11 inches)
Height without base 214.90mm (8.4 inches)
Weight ≈ 2.2g (≈ 4.8 pounds)
GTDGT
kross-studio.com
© & ™ Home Box Office, Inc (s23)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>