TRANE 18-HF13D1-1C Sound Enclosure Kit Installation Guide
- May 15, 2024
- Trane
Table of Contents
TRANE 18-HF13D1-1C Sound Enclosure Kit
Product Information
Specifications
- Product Name: Sound Enclosure Kit
- Model Numbers: BAYSDEN001, BAYSDEN002, BAYSDEN003, BAYSDEN004, BAYSDEN005
- Manufacturer: Trane and American Standard Heating and Air Conditioning
- Warning: Hazardous Voltage – Disconnect Power Before Servicing
Product Usage Instructions
For Rotary Compressor Installation
- Open the enclosure around the compressor and compressor accumulator.
- Align top cap holes with wiring harness, suction tube, and discharge tube.
- Secure the enclosure with the provided pins.
About Trane and American Standard Heating and Air Conditioning: They create comfortable, energy-efficient indoor environments for residential applications.
The manufacturer reserves the right to change design and specifications without notice.
FAQ
- Q: How do I report shipping damage?
- A: Report any shipping damage to the transportation company immediately.
- Q: What should I do if I have missing parts?
- A: Report missing parts to your supplier and replace them with authorized parts only.
WARNING: HAZARDOUS VOLTAGE – DISCONNECT POWER BEFORE SERVICING
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL
CODES
IMPORTANT— This Document is customer property and is to remain with this
unit. Please return to the service information pack upon completion of work.
Inspection
- Check carefully for any shipping damage.
- This must be reported to and claims made against the transportation company immediately.
- Any missing parts should be reported to your supplier at once and replaced with authorized parts only.
Installation
- See Figure at right for an example of a scroll compressor installation. (Reciprocating compressor is similar).
- Disconnect power to the condensing unit.
- Remove the unit top cover to gain access to the compressor.
- Wrap the enclosure around the compressor and align the line openings with the suction and gas lines of the compressor.
- Carefully align and secure the enclosure using three push pins provided in the enclosure assembly.
- Align the top cap holes with the holes on the enclosure and secure using the two push pins provided.
- Reinstall the top cover.
For Rotary Compressor Installation
- Open the enclosure like a clamshell, and place it around the compressor and compressor accumulator.
- Align top cap holes with the wiring harness, suction tube and discharge tube.
- Fasten pins provided in sound enclosure assembly to sides and top to fit securely.
About Trane and American Standard Heating and Air Conditioning Trane and American Standard create comfortable, energy-efficient indoor environments for residential applications. For more information, please visit www.trane.com or www.americanstandardair.com.
The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>