DMX Pro 1001 SceneMaster Light controllers Instruction Manual
- May 15, 2024
- DMX Pro
Table of Contents
DMX Pro 1001 SceneMaster Light controllers Instruction Manual
DMX Masks contain DMX levels that have priority in scenes. They are common to all scenes, if we change the value in a Mask it will be applied to all scenes.
Create a Mask
- Select the Mask tab from the scene edition window
- Add a new mask
- Rename and validate the creation of the new Mask
- Delete the selected Mask
Program DMX levels in a Mask
When a mask is selected, the DMX levels required must be programmed in the
same way as for adding them to a scene
- Select the desired Mask
- Enable channels with desired values, channels switch to “LTP”
- The icon of the channels used is displayed in the Mask
- To delete a channel from the Mask click on “LTP” then “on” to go to “off”
Apply a Mask in a scene
When Masks are created, they can be applied in each scene of the project.
- Check the desired mask(s) in each scene to activate them
Masks are played in all scenes where they are enabled and have priority if they play on channels already used in scenes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>