kinetik WELLBEING WBP2 Advanced Blood Pressure Monitor User Guide
- June 4, 2024
- kinetik WELLBEING
Table of Contents
Advanced Blood Pressure Monitor
WBP2
Quick Start Guide
WBP2 Advanced Blood Pressure Monitor
| Unpack, set up, and connect the
cuff to the Blood Pressure Monitor.
---|---
| Insert connector plug into the
left side of the monitor unit.
| Rest for a few minutes in a
relaxed position.
| Rest your arm on a firm surface.
| Put your arm through the cuff
loop.
| The bottom edge of the arm cuff
should be 2 to 3 cm above the elbow. The marker (arrow under the air tube) is
centered on the middle of your inner arm.
| Close the fabric fastener
FIRMLY.
| Wear a cuff on the left arm and
keep level with the heart.
|
Before you start the measurement, please select the desired user ID first.
| Confirming the user ID, press the
“MEM” button or the “START/STOP” button to recall the records.
| Press the start button to begin
blood pressure measurement.
Kinetik WBP2 NZ version Quick Start Guide
Size: 50(W) x 75(H) mm [Cover and Back Cover Size: 54(W) x 79(H) mm] Date:
20210624
20210726(V2) Revised as per the comments of 2021-07-23 22:50
20210803(V3) Revised as per the comments of 2021-08-03 11:53
20211027(V4) *Revised as per the comments of 2021-10-25 17:20
Colour: Pantone 339C (CMYK reference is C84 M0 Y59 K0); Black
Kinetik Logo Colour :
Pantone 382C
(CMYK reference is C30 M0 Y100 K0)
Pantone Cool Grey 11
(CMYK reference is C44 M34 Y22
for more information visit :
kinetikwellbeing.com
WBP2 NZ QS Guide
20211027
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>