kmart 2.4GHz Remote Control Stunt Car Instruction Manual

August 3, 2024
Kmart

Kmart 2.4GHz Remote Control Stunt Car

Battery installation

  1. Unscrew to open the battery compartment.
  2. Insert batteries into the correct + and – polarities.
  3. Close the cover.

Installing the vehicle battery

  1. Loosen the screw to open the battery cover.
  2. As shown in Figure 1, remove the battery cover, connect the rechargeable battery with connector, and close the battery cover.

How to charge

  • Turn off the vehicle. (Press and hold the ON/OFF button on the vehicle for a second)
  • Loosen the screw to open the battery cover.
  • Separate the rechargeable battery from the connector.
  • Connect the USB charging cable with a rechargeable battery first. (The battery connector will only fit in one way, do not force the connectors together), then plug the large end of the USB cable into a 5Vd.c. 2A charger (not supplied) or USB port only. The red LED light on the USS charging cable will light up when charging.
  • The red LED light extinguishes after it has finished charging.Disconnect the USB charging cable from the USB port and then disconnects the rechargable battery with USS charging cable.

Attention: Do not charge battery immediately after each play. Let the battery cool down for a while.

  • Rechargeable lithium battery pack +USB charging cable (Included).

How to use simultaneously

  1. Turn on the vehicle first and then turn on the transmitter.
  2. Move the control stick of the transmitter to match the vehicle.
  3. When the vehicle is functioning, that means they are matched.
  4. If you have more than two vehicles, please pair one by one. When the second vehicle is pairing, please always keep the first vehicle and transmitter on.
  5. Please turn off both the vehicle and transmitter and re-start all pairing processes if you are changing to play with another 2.4GHz transmitter.

How to play

How to flip over

  • Push both control sticks up or pull both control sticks down, when the vehicle hits an obstacle at high speed, the vehicle will flip over.
  • Push both control sticks up, when the vehicle runs in high speed, then quickly pull both control sticks down for the vehicle to flip over.

Note: It is not recommended to drive the car on the carpet when you perform the flip function or spin function.

  • WARNING: THIS TOY PRODUCES FLASHES THAT MAY TRIGGER EPILEPSY IN SENSITISED INDIVIDUALS.
  • WARNING: CHOKING HAZARD-SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS.

PRODUCT MAY VARY FROM THE IMAGE SHOWN. PLEASE KEEP THE PACKAGING FOR FUTURE REFERENCE. READ THE INSTRUCTIONS BEFORE OPERATING THE PRODUCT.

PERFORMANCE TIPS: DO NOT DRIVE THE VEHICLE THROUGH WATER.

  • WARNING : BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY(+ AND-). DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES. NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT SUPERVISION. THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED. REMOVE BATTERIES FROM THE TOY WHEN NOT IN USE FOR AN EXTENDED TIME OR WHEN BATTERIES BECOME EXHAUSTED. BATTERY INSTALLATION BY AN ADULT IS REQUIRED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE.
  • WARNING: THE BATTERY CHARGER USED WITH THE ELECTRIC TOY SHALL BE REGULARLY EXAMINED FOR DAMAGE TO THE SUPPLY CORD, PLUG, ENCLOSURE OR OTHER PARTS, AND IN THE EVENT OF DAMAGE, IT SHALL NOT BE USED UNTIL THE DAMAGE HAS BEEN REPAIRED.
  • WARNING: FOR SAFETY REASONS, REMOVE ALL TAGS, LABELS, AND PLASTIC FASTENERS BEFORE GIVING THIS TOY TO YOUR CHILD.
  • WARNING: THE TOY IS ONLY TO BE CONNECTED TO CL ASS II EQUIPMENT BEARING THE SYMBOL.

CUSTOMER SERVICE

  • KMART AU : 1800124 125
  • KMART NZ : 0800 945 995
  • TARGET AU : 1300 753 567

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals