hansgrohe 71280000 Logis Kitchen Tap Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe 71280000 Logis Kitchen Tap
- Product Information
- Product Usage Instructions
- Models
- Safety Notes
- Installation Instructions
- Technical Data
- Assembly
- Dimensions
- Flow diagram
- Spare parts
- Cleaning
- Operation
- Test certificate
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 71280000 Logis Kitchen Tap
Product Information
- Product Name: Logis M31 220 1jet
- Product Model: 71280000
- Operating Pressure: max. 1 MPa
- Recommended Operating Pressure: 0.1 – 0.5 MPa
- Test Pressure: 1.6 MPa
- Hot Water Temperature:
- Designed for: Drinking water
Product Usage Instructions
- Wear gloves during installation to prevent crushing and cutting injuries.
- Ensure that the hot and cold water supplies have equal pressures.
- Follow the installation instructions provided in the manual (see page 34).
- Clean the aerator if the mixer is dripping or the water is escaping in the area of the swivel spout. Replace the aerator if necessary.
- If the shut-off unit is damaged, exchange it with a new one.
- If there is water escaping at the threaded base, exchange the O-ring.
- Make sure that the connection hoses are completely screwed into the basic body to avoid any leakage.
- Refer to the cleaning instructions (see page 40) to maintain the product’s performance.
- For operation instructions, please refer to page 37 of the manual.
- Hansgrohe recommends not using the first half liter of water drawn in the morning or after a prolonged period of non-use for drinking purposes.
Models
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- 71283000: The mixer can not used together with a continuous-flow water heater.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Assembly
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Flow diagram
Spare parts
Special accessories (order as an extra)
- extension 25 mm #13898000
- Adapter (G⅜ ⁄ G½) #93395000
Cleaning
Operation
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Test certificate
Troubleshooting
Hansgrohe
Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax
+49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>