Colzer EPI-560 Air Purifier with Hepa Filter Instruction Manual
- June 5, 2024
- Colzer
Table of Contents
Colzer EPI-560 Air Purifier with Hepa Filter
CAUTION
READ AND SAVE THESE INSTRUCTIONS
- WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS AIR PURIFIER WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
- WARNING – UNPLUG OR DISCONNECT THIS AIR PURIFIER FROM THE POWER SUPPLY BEFORE SERVICING.
- WARNING – THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN OTHER). TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO DEFECT THIS SAFETY FEATURE.
Please don’t use if the cable and plug is broken. Don’t touch with wet hand. It may cause fire hazard and risk of shock Switch it off and unplug it when move the unit, undergo maintenance Unplug the unit when not use for long time Stop using the product if you found odor in the unit, contact after-sales service. Before use, please check if there are objects drop inside the unit Place the unit 50mm away from the wall or obstacle. If the cable is damaged, to prevent any risks, only service staff and professionals are allowed to replace it. Please don’t spray any painting, pesticide, alcohol and any chemical on the unit. Otherwise it will cause crack on unit, risk of shock and fire hazard If any chemical placed inside of the unit, it will release to air from air outlet. It may be harmful to your healthy. After used pesticide in the room, please don’t use the unit. Don’t use the unit in flammable and corrosive environment. When the unit is working, please don’t touch air inlet and outlet. Don’t insert your hands or other objects into the air inlet and outlet to prevent from hurt or damage the unit. To prevent from any accident and harm, don’t sit on the unit or place any object on the unit. Please don’t use the unit in bathroom or wet places. It may cause fire hazard and risk of shock. Don’t improperly modify, disassemble, repair the unit. It may cause fire hazard and risk of shock.
INTRODUCTION
This product has multi-stage filtration system. It can be effectively remove
haze, dust, dander, hair, pollen, smoke and other floating particles, it also
removes formaldehyde, VOC and odors.
Hepa filter can eliminate multi pollutants, such as haze, smut, smoke, pollen.
Active carbon filter use high-effective coconut shell activated carbon,
effectively remove formaldehyde, benzene, ammonia, voes and other odors.
Main parts
- Main body
- Air outled
- PM2.5 Sensor
- Hepa and activated carbon filter
- Filter Cover
SPECIFICATION
Before use
Removal of PE bag Before first time use, please open the filter door at the back, take out the filter and remove its PE bag wrap – or the unit will not be able to purify the air.
Operation guide
power button
Press the “Power” button to turn on/off the unit
Fan speed
Press Speed button to set fan speed at A 1 2 3 S A = AUTO mode. In AUTO mode, unit will select fan speed based on the air quality. Higher speed indicates worse pollution levels. At sleep mode, SLP will show on the display.
WiFi indicator
Press WIFI button for 3 seconds, it will flash quickly it’s ready to connct with APP. When WiFi indicator light is on, it means air purifer is connected with APP. If it flashs slowly, it’s search for signal. If It flash quickly, it’s connecting with APP
Filter reset
When turn on the unit, it starts to count the life of filter. It will continue
to count with every power on from where it was left off. After reaching 2000
hours, both buttons will flash to indicate that a replacement is needed. After
the filter was replaced, press both buttons at same time for 5 seconds, after
beep sound, LED will off. The unit restart to count the filter life again.
Child Lock function only work in APP.
The product has screen to show PM2.5 and LED color to indicate air quality
level The product will automatically detect the indoor air quality
The following table describes PM2.5 air quality level.
Clean / replace filters
Please follow the pictures below to correctly install the filter: As shown in
diagram A below: open the filter door.
As shown in diagram B: hold the strap on the filter to take out the filter. Then install a new filter in correct direction.
Maintenance guide
This product is not recommended to placed on uneven surface to avoid
vibration, noise during working and prevent risk of shock. To prevent damage,
do not put any objects inside the unit. When not in use for an extended
period, unplug it and keep away from children. To achieve better purification
results, place product in an open area, refrain from blocking air inlet and
outlet of unit. To extend the life of unit, please regularly undergo
maintenance. Before maintenance, please switch off the unit and unplug it.
After use, if the filters need to be replaced, the filter change indicator on
the control panel flashes. It reminds of user to replace with a new filter.
External clean
Before clean the external of the unit, please cut off the power.
- Use soft and clean cloth.
- Do not use alcohol, gasoline, benzo and other chemical cleaner.
Troubleshooting
WIFI Connection Guide
-
install app
-
Register
If you don’t have Smart Life account, register with a verification code sent by SMS. To register:- Tap to enter registration page
- The system automatically recognises your country/area. You can also select yourcountry code manually. Enter your mobile phone number or email address and tap “Next”
- If you choose the mobile phone number option, then enter the verification code in the message sent to you by SMS. Set a password as prompted and press “Confirm” to finish your registration.
-
Add device through network
- Power the air purifier on
- Open Smart Life app and tap “+” in the upper right, tap “All devices”and select “airpurifier” from device list.
- Press “WIFI” button on the air purifier for 3 seconds, air purifier’s indicator light rapidly flashes.
- Tap “Finish network configuration”
- Select WIFI network (note: network must be 2.4Ghz band}, enter WIFI passwordand Tap “Confirm”
- The device will commence the paring process and connect to APP.
- After successfully configuring the devices, the device will be shown on the home page. Tap to enter its control page.
NOTE:
- When the device is online, it can be controlled.
- When device is offline, it displays “Offline” and can not be remotely powered on.
Set up Amazon Echo and enable Smart Life Skill
User can configure Echo through web or Alexa app. Web configuration link: http://alexa.amazon.com/spa/index.html Search “Amazon Alexa” in App Store or Google Play Store to install the app.
- Set up Echo with Alexa app You can skip this part if your Echo is already set up.
- Make sure your Echo device is energized.
- Open the Alexa app by tapping the app icon on your mobile device.
- Type in your Amazon account and password, then tap “SIGN IN”.
- D. Tap the hamburger menu on the top left corner, select “Settings”, then tap “SET UP A NEW DEVICE”.
- E. Select your Echo model, choose a proper language, then tap “CONNECT TO WI-Fl”.
- F. Long press the dot button on the top of your Echo device until the orange light shows up, then tap “CONTINUE”. When your phone is connected to Echo, tap “CONTINUE”.
- G. Select a Wi-Fi to let Echo have the access to the internet. Type in the Wi-Fi password, then tap “CONNECT”. Echo may take several minutes to connect the network.
- H. Tap “CONTINUE” when Echo is connected to the network. After an introduction video, tap “CONTINUE” to finish the setup.
- Link Smart Life account to Alexa
- A. Tap “Skills” in the hamburger menu, then search “Smart Life”. Select “Smart Life” and tap “ENABLE” to enable the Skill.
- B. You will be redirected to the account link page. Type in your Smart Life account and password, don’t forget to select the country/region where your account belongs to. Then tap “Link Now” to link your Smart Life account. The country/region, the account, and the password must match with the exact content in.
Control your smart devices through Echo
Discover devices
Echo needs to discover your smart devices before it controls them. You can say
“Alexa, discover devices” to Echo. Echo will discover devices which have
already been added in the Smart Life app. You can also tap “DISCOVER” to
discover the smart devices. Discovered devices will be shown in the list
.
Note: every time you change the device’s name on Smart Life app, Echo must re- discover before you control them.
Control devices by voice commands
Now you can control your smart devices through Echo. You can use the following
commands to control your devices:
- Alexa, turn on/off air purifier.
- Alexa set air purifier to 1. Will turn to Speed 1 , Alexa, turn air purifier to 2. Will turn to Speed 2
Google Home Control
Note: You will need to have set up a Google Home account prior to linking your air purifier.
- Select “Menu” and then “Home Control”
- In the “Home Control” screen, select the”+” icon in the bottom right.
- A list will appear showing actions and a search function to access more apps: from here, install the Smart Life app.
- Log into your Smart Life account with your mobile number or email address.
- Once linked, it will show the devices linked to your account: you can assign them to rooms. You will be prompted to authorise apps to sync.
- Click “Done”, and then it will give you a list of commands available.
- When successfully linked, you will see it on your “Home Control” screen at the bottom of app screen. You can now control your air purifier through Google Home.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>