milwaukee L4 TMLED Twist Focus Flashlight Instruction Manual
- June 4, 2024
- Milwaukee
Table of Contents
Nothing but HEAVY DUTY
L4 TILED
Original instructions
Picture section
with operating description and functional description
L4 TMLED Twist Focus Flashlight
|
---|---
Dual-function power button
Press firmly (click) -> on/off
Press firmly for 1 sec. -> cycle through the modes
WARNING Read all safety warnings, instructions, illustrations, and specifi
cations provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY-LAMP
Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss. Don‘t use this tool in wet areas.
SAFETY INSTRUCTIONS BATTERY
Only use Milwaukee Type L4B2, and L4B3 rechargeable batteries.
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee
Distributors off er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with the battery, acid washes it off
immediately with soap and water. In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or charger in fl
uid or al-low a fluid to fl ow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach or bleach-containing
products, etc., Can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The battery lamp is intended to be used light independent use away from the
mains supply.
Do not use this product in any other way as stated for normal use.
CHARGING
Plug your USB cable into a power source such as an AC wall adaptor, computer
or carport.
The indicator light will display the charging status: Red flashing: charging,
0-49% charged Orange flashing: charging 50-99% charge
Green solid: 100% charged
Red/Green fl ashing: damaged or faulty battery
If the light indicator fl ashes red and green, check that the battery is fully
seated into the bay. Remove the battery and reinsert. If the light continues
to illuminate solid red, the battery may be extremely hot. Allow the battery
to cool down then reinsert. If the problem persists, contact a MILWAUKEE
service facility.
FUEL GAUGE
The fuel gauge will display the battery life:
Red flashing: 0-3% remaining
Red solid: 3-10% remaining
Orange solid: 11-49% remaining
Green solid: 50-100% remaining
BATTERIES
Battery packs that have not been used for some time should be recharged before
use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended
exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after
used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery pack where the
temperature is below 27°C and away from moisture Store the battery packs in a
30% – 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
-
The user can transport the batteries by road without further requirements.
-
Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods
regulations. Transport preparation and transport are exclusive to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts. When transporting batteries: -
Ensure that battery contact terminals are protected and insulated to prevent short circuits.
-
Ensure that the battery pack is secured against movement within the packaging.
-
Do not transport batteries that are cracked or leak.
Check with the forwarding company for further advice
MAINTENANCE
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| CAUTION! WARNING! DANGER!
---|---
| Please read the instructions carefully before starting the machine.
| Do not stare at the operating light source.
| Warning! Hot Surface! Do not touch!
| Class III electrical protection.
| Do not dispose electric tools, batteries/rechargeable batteries together
with household waste material.
Electric tools and batteries that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling
facility. Check with your local authority or retailer for recycling advice and
collection point.
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| Eurasian Conformity Mark
TECHNICAL DATA
……………………………………………………………………………………………………………………………………….L4 TMLED
Rated Power input ……………………………………………………………………………………………………………………….12,8 W
Lighting time with one fully charged battery Mode High
………………………………………………………………..1,0 h
Mode Medium ……………………………………………………………………………………………………………………………..4,0 h
Mode Low ……………………………………………………………………………………………………………………………10,0 h
Luminus flux Mode High …………………………………………………………………………………………………1100 lm
Mode Medium ………………………………………………………………………………………………………………………600 lm
Mode Low …………………………………………………………………………………………………………………………………….100 lm
Charging time ………………………………………………………………………………………………………………………………………..120 min
Color rendering index (CRI)…………………………………………………………………………………………………….80
Color temperature……………………………………………………………………………………………………………………..4000 K
Battery voltage……………………………………………………………………………………………………………………………..4 V
USB input …………………………………………………………………………………………………………………………………..5V DC; 0,1 A –
2,1 A
Weight …………………………………………………………………………………………………………………………………….0,2 kg
Protection class ………………………………………………………………………………………………………………………. IP 67
Recommended ambient operating temperature …………………………………………………………………………..
-18…+50 °C
Recommended ambient charging temperature …………………………………………………………………………………
+5…+40 °C
Recommended battery types…………………………………………………………………………………………………….. L4B2, L4B3
Recommended USB power supply………………………………………………………………………………………………….CUSB
.
https://tm.by
Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10 71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd Fieldhouse Lane
Marlow Bucks SL7 1HZ UK
(12.20) 4931 4704 16
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>