younghuisolar 120W 700W Grid Tie Inverter User Guide
- May 15, 2024
- younghuisolar
Table of Contents
younghuisolar 120W 700W Grid Tie Inverter
PREFACE
This product has been carefully designed and manufactured to meet your
needs and provide superior performance. To ensure that you can take full
advantage of all its features, this manual will guide you step-by-step through
all aspects of the product, including installation, operation, maintenance and
troubleshooting.
Unpacking and checking
After receiving the package, please check whether the package is complete.
- Grid-tie inverter*1
- AC cable*1
Packing List
Port Introduction
- DDC input port, positive
- DC input port, negative
- AC output
- Working indicator
Solar panel usage parameters
model | 120W | 150W | 180W |
---|---|---|---|
Operating Voltage Range | 10.8V-30V | ||
M ax. DC I nput Voltage | 30V | ||
starting voltage | 15V | ||
Recommended solar panel voltage | **Operating voltage Vmp16-21V;Open circuit |
voltage Voc20-24V
M aximum panel input power| 120W| 150W| 180W
Rated AC Voltage| 120V/230V
model| 300W| 350W| 500W| 600W| 700W
---|---|---|---|---|---
Operating Voltage Range| 18V-50V
M ax. DC I nput Voltage| 50V
starting voltage| 24V
Recommended solar panel voltage| Operating voltage Vmp30-39V;Open circuit
voltage Voc38-50V
M** aximum panel input power| 300W| 350W| 500W| 600W| 700W
Rated AC Voltage| 120V/230V
Connections for use
AC cable wiring method
Built-in AC cable, you need to buy the plug yourself. When connecting the
cable, you need to connect to the plug according to L, N, G.
AC Cable Description
AC cable wiring method
Purchase SMAC cable, no need to DIY. direct use.
Solar panel connection
Note: some cust extend the print cable easily so be wise about the
positive and negative poles.
Step 2: Inverter AC output connected to the home socket, open the socket
switch to ensure that the home power grid is in a normal energized state;
(Figure 2)
Notes:
- Unable to use during a power outage!
- The power of the panel cannot exceed the power of the inverter, and the panel voltage must be within the specified voltage range of the inverter
- When the panels are connected in series, the power and VOC of the panels will be added up; When panels are connected in parallel, VOCs are not added together;
Common problems and after-sales service
Inverter heating
This is a normal phenomenon. All electronic devices generate heat during
operation. The inverter uses aluminium alloy material. Metals can better
transfer heat. The inverter also has over-temperature protection, if the
temperature is very high. So the inverter will automatically reduce the
working output efficiency. Or stop working. Until it cools down, restart. It
is recommended to install the inverter in a ventilated, dry, and cool place.
(If the local temperature is too high, you can install an additional small fan
to cool the inverter)
Inverter not working
Please test whether the input voltage of the panel is within the specified
range of the inverter, The inverter AC output port is connected to a home
socket, and the socket is powered on .
After you have completed the above self-test. Please contact merchant customer support. To solve the problem faster, you can provide us with the following information so that the technician can analyze the judgment?
- How many solar panels do you use? What is the wattage of the solar panel?
- What is the open circuit voltage of the solar panel in volts? (Voc)
- How to connect solar panels in series or parallel?
- What is the state of LED? Not lit up? Red light?
How to record a video? (Suggestion))?
- Please connect all wiring. DC and AC terminals.
- Test the DC input voltage and take photos. Please test the AC voltage and take a photo.
- You can also connect the AC power cord to a home socket. Then connect other loads to the home socket, such as a fan, and start it. We need to determine if the power grid of the socket you are connected to is normal.
- Please record the LED status.
After identifying the problem, we will assess the extent of the damage.
- Send you accessories and replacement tutorials
- Send motherboard
- Return or other solutions
After-sales contact
Please feel free to communicate with us anytime if you have any problems
during the use. In Tove communication time, we suggest you contact us
directly.
WhatsApp. We can contact you in time with any new reply.
WhatsApp: +8613750091547
E-mail: barley@yonghuisolar.com