ANKER A1721 522 Portable Power Station User Manual

: May 15, 2024
: Anker

Table of Contents

ANKER A1721 522 Portable Power Station
Product Usage Instructions
Overview
Recharging
Charging
Power Saving Mode
LCD Screen Guide
Flashlight Mode
Trouble Shooting
FAQ
Specifications
IMPORTANT SAFETY INSTRUCTIONS
Maintenance
FCC Statement
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER A1721 522 Portable Power Station

ANKER-A1721-522-Portable-Power-Station-PRODUCT

Specifications

Cell Capacity : N/A
DC Input: N/A
Car Charger Output: N/A
AC Output : N/A
USB-A Output: N/A
USB-C 1 Input : N/A
USB-C 1 Output : N/A
USB-C 2 Output: N/A
Discharging Temperature: N/A
Charging Temperature : N/A
Size: N/A
Net Weight: N/A

Product Usage Instructions

Charging

The USB-A and USB-C ports support plug and charge. Devices plugged in will start charging automatically, and unplugging them will turn them off.
The car socket and AC output port require using the corresponding on/off buttons to turn them on before charging.
To prevent battery drain, it is recommended to keep Power Saving Mode turned on, except for low-powered devices like CPAP machines and cameras.

Power Saving Mode

Switching on the power saving mode prevents wastage of power by automatically turning off the Power Station when all devices are fully charged. Turning off the power saving mode allows stable charging over an extended period for specific purposes.

Flashlight Mode

Press the button once to turn on the ambient light.
Hold the button for 2 seconds to activate SOS mode.

Troubleshooting

If the Power Station malfunctions, insert a paper clip or pin into the reset hole for 1 second to perform a factory reset. If issues persist, contact support@anker.com.

Overview

ANKER-A1721-522-Portable-Power-Station-FIG-1

Recharging

ANKER-A1721-522-Portable-Power-Station-FIG-2

Please fully charge the product before using it for the first time.
When your portable power station only has 1% battery remaining, the indicators will flicker to remind you to recharge the device.

Charging

ANKER-A1721-522-Portable-Power-Station-
FIG-3

The USB-A and USB-C ports support plug and charge. When devices are plugged in, they will start charging automatically; when devices are unplugged, they will turn off automatically.
The car socket and AC output port do not support plug and charge. Use the corresponding on/off buttons to turn them on before charging.
To avoid draining the battery, we recommend keeping Power Saving Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.

Power Saving Mode

Switching on the power saving mode prevents wasting power by automatically turning off the Power Station once all your devices are fully charged.
Switching off the power-saving mode will enable stable charging over an extended period, such as for time-lapse photography or for sleeping with a CPAP machine.

LCD Screen Guide

Power Saving Mode
High-Temperature Alert
• When this icon shows, stop using the product and leave it to cool down until the icon disappears.
Low-Temperature Alert
• When this icon shows, stop using the product until the icon disappears.
USB-C Input/Output Port
USB-A Output
Car Charging
AC Charging and Voltage Frequency
Press the AC output port on/off button for 2 seconds to switch the frequency.
Remaining Battery
Remaining Battery in Hours
Current Input Power
Current Output Power

Flashlight Mode

Press the button once to turn on the ambient

Hold the button for 2 seconds to turn on SOS mode.

Trouble Shooting

Resetting Your Power Station

If your Power Station isn’t working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the Power Station still doesn’t work, please contact support@anker.com.

FAQ

Q1 : What’s the maximum power output of the AC port?
300W, and if you use the AC port for devices greater than 300W, the product will automatically turn off.
Q2: Can I recharge the product while charging connected devices?
Yes.
Q3: Can this product power a CPAP?
Yes, but do not forget to turn off the Power Saving Mode first.
Q4: Will this product lose power automatically if not powered off?
Yes, when the car socket or AC control button is turned on, even if no devices are being charged, there will still be a certain amount of no-load power consumption. To avoid draining the battery, we recommend keeping Power Saving Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.
Q5 : What kind of solar charger can charge this product?
Any 11V-28V solar charger with a DC 8mm（DC 7909）male connector. Yes, but do not forget to turn off the Power Saving Mode first.

Specifications

ANKER-A1721-522-Portable-Power-Station-FIG-23

Attention
Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product, basic precautions should always be followed, including the following: Read all the instructions before using the product.

Read all the instructions before using the product.

To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not put your fingers or hands into the product.
Do not expose the product to rain or snow.
Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
Do not use the product in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury to persons.
Do not use a product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not operate the product with a damaged cord or plug, or a damaged output cable.
Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
Do not be exposed to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause an explosion. To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
Do not clean the product with harmful chemicals or detergents.
Misuse, dropping or excessive force may cause product damage.
When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Do not use or store the power station in direct sunlight for an extended period, such as in a car, cargo bed, or any other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate, or generate heat.
Do not use the product for applications such as data servers or medical equipment where a malfunction in an emergency could seriously endanger human life or property

Maintenance

Storage and Maintenance instructions

Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in a humid environment.
To preserve the battery lifespan, charge to 100% after using. If you plan to store your power station, recharge to 100% every 3 months.
Keep the product on a flat surface when using, charging, and storing.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973

IC Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This digital apparatus complies with CAN ICES-003 (B)/NMB-003(B).

Customer Service