rOllOdin C0069 Eve Motionblinds Motor Instruction Manual

Product Specifications

• Product Name: Eve Motionblinds motor C0069
• Power Source: USB-C charging
• Input: 5V
• Control: Pull control
• Indicator: LED (battery/reset indicator)

Product Usage Instructions

Charging the Motor:

1. Activate the motor by connecting a standard 5V USB-C cable to the device.
2. Ensure the battery is fully charged before initial use.
3. Use a smartphone charger or any other compatible USB-C power source for charging.

Activating the Blinds:

1. Press the button to activate the blinds.
2. Follow the indicated time frames for different functions (e.g., short press, long press).
3. Use the pull control to adjust the blinds as needed.

Product Overview

This manual provides instructions for the Eve Motionblinds motor C0069, a motorized system for window blinds that can be controlled remotely.

Specifications

Buttons and Functions

The motor has various components for operation and connectivity:

• Antennas
• USB-C Charging Port
• LED (battery/reset indicator)
• Mode Change Button
• Reset/Programming Button
• Pull Control

Installation

1. Follow the steps in the installation guide to mount the blind.
2. Activate the blind by connecting a standard 5V USB-C cable (such as one from your smartphone charger).

Integration
Add Eve Motionblinds to your chosen system and ensure you have a compatible Thread Border Router.

Programming the Blind
Easily add the Eve Motionblinds to your Smart Home system with a few simple steps by scanning the Matter QR code with the app corresponding to your system.

Programming the End Positions

1. Program the end positions directly on the blind using the end position button. Adjust until you reach the desired position.
2. To save the lower end position, hold the end position button until the blind steps up and down once, then release to save your setting.
3. To save the upper end position, repeat the process as described for the lower end position.

Adjusting the End Positions
If you need to adjust an end position, roll the blind to the end position you wish to adjust. Use the pull cord and wait until the blind reaches the end position to adjust.

Erasing the End Positions
To erase an end position, hold the end position button for 3 seconds. The blind will step up and down once to confirm that the end position has been erased. You can now program a new end position.

Setting and Controlling a Favorite Position

1. To save a favorite position that is different from the upper or lower end positions, roll the blind to the desired favorite position. Hold the pull cord until the blind steps up and down once (approximately 7 seconds).
2. To move the blind to your saved favorite position, hold the pull cord for 5 seconds.

Changing the Direction of Movement
If the blind moves in the opposite direction to what the app indicates, change the direction by pressing the end position button twice in quick succession.

Charging the Motor
Connect your blind motor to a USB-C 5V charger using a USB-C cable, such as the one from a smartphone charger. Charge at least once a year.

• The LED light blinks red when in use; charge the battery.
• The LED light blinks green; the battery is charging.
• The LED light is solid green; the battery is fully charged.

Changing Motor Speed / Sound Volume
Hold the programming button for 5 seconds to change the motor speed/sound volume. The blind will step up and down once to indicate the speed has been adjusted. Release the button after 5 seconds when the blind stops to avoid disconnecting the motor from the blind.

Removing the Blind from the App
Hold the programming button for 10 seconds to remove the connection between the app and the blind. The LED will blink 5 times and the blind will step up and down once to indicate the connection has been removed. You can now reconnect the blind.

Factory Reset
To factory reset the blind, press the programming button briefly to activate the programming mode. The blind will step up and down twice. Hold the reset/programming button for at least 20 seconds to initiate the factory reset. After the second stop, the blind will step up and down once more to indicate it has been factory reset.

Frequently Asked Questions (FAQ)

How do I know when the battery is fully charged?

The LED indicator will show a specific pattern or color when the battery is fully charged.

Can I use any USB-C charger to power the device?

Yes, you can use any standard 5V USB-C charger to power and charge the motor.

How long does it take to fully charge the battery?

The charging time may vary, but typically it takes around 2-3 hours to fully charge the battery.

How do I charge the Eve Motionblinds motor?

Connect it to a USB-C 5V charger with a USB-C cable and charge at least once a year.

Can I adjust the speed of the motor?

Yes, hold the programming button for 5 seconds to adjust the motor speed.

How do I perform a factory reset on my Eve Motionblinds?

Press the programming button briefly, then hold the reset/programming button for at least 20 seconds.

How can I remove the blind from the app?

Hold the programming button for 10 seconds until the LED blinks 5 times.

rOllOdin C0069 Eve Motionblinds Motor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>