DeerValley DV-1S0019 Smart Toilet Instruction Manual

May 15, 2024
DeerValley

DeerValley DV-1S0019 Smart Toilet

DeerValley-DV-1S0019-Smart-Toilet-image

Product Information

The Smart Toilet is a high-tech toilet designed for modern bathrooms. It comes with a remote control for easy operation and various features for enhanced comfort and convenience.

Product Usage Instructions

Installation

Before starting the installation process, ensure you have the necessary tools including those listed in the manual. Make sure the product is installed as per the provided instructions to avoid any issues.

Parts Included

The package includes all necessary parts for installation. Refer to the parts diagram in the manual to identify each part correctly before starting the installation process.

Remote Control Operation

Use the remote control to operate the Smart Toilet efficiently.
Familiarize yourself with the functions and buttons on the remote control for seamless operation.

Testing Before Use

After installation, perform a test run to ensure the Smart Toilet functions correctly. Check all features and settings to make sure everything is working as expected.

Battery Backup Installation

If applicable, install batteries for backup power in case of electrical outages. Follow the instructions in the manual for proper battery installation.

FAQs

  • Q: What should I do if the Smart Toilet malfunctions?
    • A: If you encounter any issues with the Smart Toilet, refer to the troubleshooting section of the manual. If problems persist, contact customer service for assistance.
  • Q: Can I use the Smart Toilet in wet environments?
    • A: No, it is advised to keep the Smart Toilet away from wet environments to prevent damage and ensure user safety.

Installation and Owner’s Manual
Smart Toilet
(DV-1S0019)
NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@deervalleybath.com

(+1) 312-626-9466 service@deervalleybath.com

Installation and Owner’s Manual

Important Safe Guards

IMPORTANT SAFEGUARDS
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short circuit, a grounded product reduces the risk of electric shock.This product is equipped with a cord having a grounded wire with a grounded plug. The plug must be plugged into an GCFI outlet that is properly installed and grounded.
DANGER ­ Improper use of the plug can result in a risk of electric shock.
Check with a licensed electrician or serviceman if the grounding instructions are not completely understood. Or if there is any doubt the product is properly grounded. This product is for use on a nominal 110 V circuit, and has a grounded plug that looks like the electrical plug illustrated below.
Grounding Methods

Grounding pin AA200

Grounded
outlet

Grounded
outlet box

*WARNING: Risk of electric shock Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI).

NOTE: Specialized tools may be necessary to install DeerValley Smart Toilet, plumbing not included.
(+1) 312-626-9466 w w w. d e e r va l l e y ba t h . c o m

Installation and Owner’s Manual

2. Explanation of Terms and Symbols
Thank you for purchasing our product. Please read this User Manual before installation and use and save it for future reference. The hazards and warnings listed herein are important to our users’ safety. Significant consequences may result from failure to heed warnings.
Explanation of Terms and Symbols

WARNING ATTENTION

Indicates possible injury or death resulting from improper usage due to disregarding this message. Indicates human injury or property loss that may result from improper usage due to disregarding this message.
When used with the above “Warning” and “Attention” signs, indicates a strict request to follow noted precautions.
Prohibits any individual from performing any action with this symbol.

Prohibits any individual from disassembling the product.
Keep product away from any wet environments, including, but is not limited to, humid environments, close proximities to baths, showers or sinks.
Do not touch.

Do not touch with a wet hand.

Keep away from any extreme heat or fire.

Operate only as instructed.

Unplug the unit from power.

Protective grounding.

NOTE: Drawings may not exactly define contour of the product.

-3-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

3. WARNING & Attention

WARNING

This product needs to be properly grounded. Risk of electric shock. If unsure, contact an electrician.

Do not place a lit cigarette along with other burning objects into the unit. Risk of fire.

Do not touch, insert or pull out the power plug with a wet hand. Risk of electric shock.

Do not use during thunderstorms (pull out the power plug during storms). Failure in doing so may lead to injury or malfunction.

Do not use a power socket in poor condition or a damaged power plug. Risk of fire and/or electric shock.
When the seat or lid is damaged, to avoid any harm, be sure to unplug the unit from power, shut off the water supply and contact your local distributor for replacement. Risk of fire and/or electric shock.
The power socket in use should be within the specified range (AC 110 V ± 10%, Max current > 10A). Risk of fire and/or electric shock.

NOTE: Drawings may not exactly define contour of the product.

-4-

(+1) 312-626-9466 www.deervalleybath.com

Installation

WARNING Regularly unplug the unit from power and wipe off any dust on the plug using a dry cloth. Risk of fire.
Young children, the aged and the physically disabled should be given supervision by a person responsible for their safety while using the unit. Otherwise, prolonged use may cause low temperature burns.
Do not pull, damage, bend, twist, stretch, roll, bundle, clamp or squeeze the power cable. Do not place anything on power cable. Risk of fire and/or electric shock.
This product is not a toy. Advise children not to play with product. Risk of injury.
If the power cord is damaged, to prevent any injuries or accidents, it should be replaced by a professional. Risk of fire and/or electric shock.
For cleaning or maintenance of plastic parts, do not use any harsh cleaning agents. (These include but not limited to concentrated sulfuric acid, concentrated nitric acid, glacial acetic acid, carbon tetrachloride, chloroform, acetone, butanone, benzene, methylbenzene, phenol, methylphenol, dimethylformamide, methyl ether, soybean oil, acetate, 40% nitric acid, thick salt acid, 95% alcohol, kerosene,gasoline, or brake oil, etc.) Otherwise, the plastic part may crack and cause personal injury; Risk of fire and / or electric shock.

NOTE: Drawings may not exactly define contour of the product.

-5-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
WARNING Do not disassemble, repair or alter this product on your own. Call in a professional or contact HuiDa for future advise. Risk of fire, electric shock, and/or other accident that may lead to injury.
Do not use industrial or polluted water. Risk of cystitis, dermatitis and electric shock and fire due to internal corrosion of the unit.
Do not apply any force to the unit’s seat and lid. Do not stand on the lid or open or close the lid and the seat forcefully. Risk of product damage and user injury.
Do not add water or detergent into the unit or onto the remote control. Do not splash water or cleaner on the product and power plug. Risk of fire and electric shock.
Do not place your hand or any other object into the dryer outlet, and do not cover the dryer and dryer outlet when product is. Risk of fire, electric shock, and/or other accident that may lead to injury.
Do not install or use the unit in a damp and easily immersed bathroom. Do not spray water on this product or rinse it with water to prevent damage. Risk of fire and electric shock.
Do not spray urine at the dryer. Risk of electric shock.

NOTE: Drawings may not exactly define contour of the product.

-6-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
BATTERY WARNING
Read the following for proper battery usage: Properly install the battery according to its correct polarity. Remove the battery during long periods without use. Replace the battery before it reaches the end of its usage. Failure to do
so may result in interrupted signals. Cover the battery with tape before disposal. This will prevent battery fluid
leakage that may cause fire and / or other damages. Place the battery out of children and infant reach.
If battery is swallowed, contact a doctor immediately. If battery fluid leaks onto user, quickly rinse off with clean water.
Do not do the following with the batteries: Do not hold or store with metal objects (such as a necklace or a watch). Do not mix new and old batteries. Do not pull apart battery or throw it into water and/or fire.
Battery fluids may cause a fire.
ATTENTION
Do not use the heated seat or dryer for a long time with high or middle temperature. Risk of burns.
Avoid direct sunlight or heat. Risk of product discoloration.
While using the unit, make sure that the skin is in contact with the seat sensor area. Otherwise, product may not operate correctly. Children may have difficulty staying in contact with sensor area.

NOTE: Drawings may not exactly define contour of the product.

-7-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
ATTENTION To avoid danger from false reset of the thermal breaker, do not supply power through an external switching device, such as a timer, or connect to a circuit that is periodically turned on and off by a general-purpose component. Do not hit the ceramic with gravity to prevent damage and water leakage.
Do not spray urine on the nozzle. Dirt may cause clogging.
Please do not bury cementitious materials (cement mortar, etc.) in the toilet base to prevent the toilet from being cracked due to expansion. Do not flush newspaper, diaper pads, sanitary napkins and other items that are easily blocked into the toilet.
When replacing the filter, be sure to turn off the angle valve. When the filter is being installed, be sure to fasten it with force. Risk of leakage.
Do not use the unit in an environment below 0°C.

NOTE: Drawings may not exactly define contour of the product.

-8-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

ATTENTION
Unplug the unit when the product is in disuse for a long time. Make sure to shut off the water supply and drain the water inside the product. Risk of fire, leakage and product damage.

Do not use old hose to connect to unit. Use the one provided with your product. Anything else connected to the older hose may need replaced. Risk of water leakage and property loss.
When storing or transporting in cold climate, make sure to drain the water from the unit. Product may crack and other damages may occur due to freezing water. Risk of fire, leakage, and product damage.

In case of sudden power failure, unplug the power plug and turn off the angle valve to prevent water leakage. Risk of water leakage or property loss.

WARNING­ To reduce the risk of burns, electrocution, fire, or injury; 1. Close supervision is necessary when this product is used by, on, or near children. 2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 3. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair. 1. Keep the power cord away from heated surfaces. 2. Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like. 3. Never use while sleeping or drowsy. 4. Never drop or insert any object into any opening or hose. 5. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 6. Connect this product to a properly grounded outlet only. See Grounding Instructions.

NOTE: Drawings may not exactly define contour of the product.

-9-

(+1) 312-626-9466 www.deervalleybath.com

Product Installation

(1) Tools needed

Installation and Owner’s Manual

Drill(with 6mm Bit)

Raw Tape

Utility Knife

Marker

23-26mm(Adjustable Wrench)

Screwdriver

Tape Measure

(2) Parts included
Smart Toilet

T-Valve

Measuring Cup Wax Ring

Remote Control assembly

Operating instruction and other prints

Connector

Floor Bolts

Please confirm that all articles in the package are complete. If any of parts are missing, please contact our customer service department at(Customer fill in the after-sales phone number). The picture is for reference only, please refer to the actual product.

NOTE: Drawings may not exactly define contour of the product.

-10-

(+1) 312-626-9466 w w w. d e e r va l l e y ba t h . c o m

3. Parts Diagram
(1) Smart toilet overall view
knob Toilet Water Supply Hose Tee valve Water Supply Angle Valve Smart Toilet Water Supply Hose

Installation and Owner’s Manual
Safety Instruction Cover
Power Plug Dryer
Nozzle (Rear Wash and Front Wash) Seat Sensor
Heated Seat
Toilet
Foot Touch

knob

The appearance and functions of the real product shall prevail.

NOTE: Drawings may not exactly define contour of the product.

-11-

(+1) 312-626-9466 w w w. d e e r va l l e y ba t h . c o m

(2) Remote Control
Night Light On/off of night light Nozzle Clean Key for nozzle clean
Dryer Dry washed part with warm air
Water Temp. Water temperature can be adjusted at wash Dryer Temp. Temperature of warm air can be adjusted Seat Temp. Temperature of seat ring is adjustable

Installation and Owner’s Manual

Feminine

Hot/Cold Alternate wash with hot and cold water
Feminine Used for wash of female’s
Flush Flush after use
Posterior Used for posterior wash Position Adjustment of 5 levels can be realized at nozzle’s position Strength Adjust strength of posterior and feminine wash

NOTE: Drawings may not exactly define contour of the product.

-12-

(+1) 312-626-9466 w w w. d e e r va l l e y ba t h . c o m

Installation and Owner’s Manual
(3) Precautions before Installation
Water Pressure Requirements
The minimum dynamic operating water pressure is 25 Psi, and the maximum static water pressure is 80 Psi.

16.61″ 16″

15.35″ 18.43″ 27.17″

Rough-in 12″

NOTE: Drawings may not exactly define contour of the product.

-13-

(+1) 312-626-9466 w w w. d e e r va l l e y ba t h . c o m

Installation and Owner’s Manual

4. Installation The Smart Toilet
(1) Draw a cross marker on the drain outlet on the ground. Clean the floor and wipe off any excess dust or dirt . Failure to install on an cleaned surface will affect the quality of installation.

Existing water supply angle valve

Grounded waterproof and splashproof electrical outlet.

Drain outlet Cross marker
(2) Installation of floor flange.
Ground Flange

8″ (200mm) 12″ (305mm)

(3) Install smart toilet bottom flange anchor screw. Turn the ceramic body over laterally and place on a prepared foam surface. By visual measurement, draw a line on one lateral side of the ceramic body point of the drain outlet perpendicular to the plane against the central of ceramic bottom, and the same for the other lateral side, and draw a line perpendicular to the floor from the front central point of ceramic body.
Marking Pen

NOTE: Drawings may not exactly define contour of the product.

-14-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

(4) Install the wax ring and brass floor bolts onto floor flange. Center and press the wax ring on the floor flange. Insert the 2 brass floor bolts flat head thru the appropriate slot in the floor flange. Use the provided plastic floor bolt washer to secure the floor bolts on the floor flange. Brass bolts should remain verticle FIGURE 5A. Install the wax ring at the sewage outlet of the product FIGURE 5B.

FIGURE 5A
Floor Bolts

Wax Ring

FIGURE 5B
Wax Ring

Flange
(5) Preparing the toilet seat for toilet bowl installation. Hold both seat and cover vertical, pull upward to detach them from ceramic bowl. Movethe seat forward as shown.

(6) Installing the toilet bowl onto floor flange
Two people to lift the toilet bowl, slowly lower the bowl onto the floor flange use the guide marking as the toilet reference. Making sure the floor bolts on the floor flange completely come through bolt opening on the bottom of toielt bowl by viewing from the back of the seat. Next, press down the toilet bowl firmly onto the floor so the wax ring can create the full seal. Lastly, screw down the nuts on the floor bolts by hand to secure the toilet bowl on the floor from the opening behind the back of the seat.

FIGURE 7A

FIGURE 7B

FIGURE 7C

FIGURE 7D

Caution: Do not move the toilet bowl around once the toilet bowl is in position. It can damage the wax ring seal and result in water leakage.
NOTE: Drawings may not exactly define contour of the product.

-15-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

(7) Conncting the tee valve to shut off valve and connecting braided water supply hoses. With the 3/8″ male connection facing to the right, apply Telflon tape and screw on adapter (supplied).

FIGURE 9A

FIGURE 9B

Connect tee valve to male thread on adapter (apply Telflon tape to male threads). Connect braided supply tubes to tee valve male connections. – 1/2″ seat water supply hose to bottom of tee valve – 1/2″ toilet water supply hose to right side of tee valve Note: Use Telflon Tape on all threaded connections to insure a water tight seal.

FIGURE 9C

FIGURE 9D

(8) Confirm the water supply.
Open the water supply angle valve to the greatest extent as shown in the drawing. Make sure there is no water leakage in each connection part. If there is water leakage, please re-tighten the nut for re-installation.

NOTE: Drawings may not exactly define contour of the product.

-16-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
(9) Connect the power supply. Connect the ground wire. Power plug into the AC 120V socket. Confirm whether the power is connected.
Note: Confirm indicator light on the power plug. A lit-up power indicator light will confirm that the smart toilet is powered-on. When powered on, press and hold the knob for 3 seconds to enter standby mode.

NOTE: Drawings may not exactly define contour of the product.

-17-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
5. Install the Remote Control
(1) Install the Remote Control 1. According to the location of the screw holes of the remote control holder, drill two holes with a 6mm-diameter drill.bit on the wall with a depth greater than 45mm. 2. Install the expansion tube into the holes. 3. Place the remote control holder onto the fixing hole. 4. Fix the remote control holder with the configured expansion screws. 5. Open the battery area of the remote control and install new batteries. 6. Place the remote control on its holder.The specific steps are shown in the drawings below. If the wall for installation is of a specific material (such as wood panel, MDF), please use a suitable fixing method. The remote control should be installed in a place that is not easily exposed to water.

Installation steps:
45mm

Anchor

Bracket of remote controller

Screws

Completion Placement of bracket of remote installation control

6mm

NOTE: Drawings may not exactly define contour of the product.

-18-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

(2) Test before use

Test run (test all function buttons on the remote control and the knob on toilet body.)

Is each function of the product normal? Are the rear wash and front wash (including spray strength adjust ment, nozzle position adjustment), dryer, air temperature, water temperature and seat temperature, nozzle clean working normally? All the above series of actions should be checked.

Seat sensor point

Operation to test rear wash process Please use your hand to cover the sensor area, turn the knob

Code matching of remote controller

Code matching of the remote controller has been completed at delivery of the product. In case of malfunctioning of the remote controller, match the codes as per the following method.

1.Pull off the plug of the product, hold on the stop key till the level indicator flickers and then loosen it.
Hold on the stopkey Level indicator flickers

2.Put the remote controller close to the product and insert the

3.The level indicator stops flickering and is normally on. All level indicators (in red) are normally on

4.Code matching succeeds.

NOTE: Drawings may not exactly define contour of the product.

-19-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

6. Remote Control Operation
The product has a built-in sensor in the seat. If user is not seated properly, the rear wash, front wash and dryer functions cannot be operated.
Feminine

Press “Feminine ” key.
Water flow for wash is jetted out of the front end of the nozzle, and the private part of female is washed by way of wash in movement. Press it again to turn off wash in movement.
Posterior

Feminine

Press “Posterior” key.
Water flow for wash is jetted out of the front end of the nozzle and washes the posterior by way of wash in movement. Press it again to turn off wash in movement.
Flush
Press “Flush” key.
The product flushes for once.
Stop

Press “Stop” key to stop the product.
For posterior and feminine wash, there’s an auto-stop function 4 minutes later.

NOTE: Drawings may not exactly define contour of the product.

-20-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

Hot/Cold
Press “Hot/Cold” key, and Hot/Cold function will be enabled or disabled.
In wash mode, press Hot/Cold key to realize cold and warm water wash alternately. This function can only be used in wash mode.
Dryer

Feminine

Press “Dryer” for drying washed part.
Press Dryer for drying washed part. When it is switched to warm-air temperature, press ” Dryer Temp.” key, current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, it will be switch to temperature level, and proper temperature can be set.
When the key is pressed, display indicator is
switched amongOff (display indicator is off), Low level (display indicator is in blue), Middle level (display indicator is in purple) andHigh level (display indicator is in red).
Warm air has automatic stop function 4 minutes later.
Reference After wash, wipe off the water drops with tissue,
and press Dryer key for drying quickly.
Warning
When a child, an old man, a patient, a person with poor skin or who moves slowly, or a person unable to adjust the temperature, or a person having drunken too much, is using warm air for drying, the accompanying person shall set air temperature to “Low level”.

NOTE: Drawings may not exactly define contour of the product.

-21-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

Water Temp.
Press “Water Temp.” key to adjust water temperature for wash.
Current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, temperature level will be switched, and proper temperature can be set.
When the key is pressed, display indicator is switched amongOff (display indicator is off),Low level (display indicator is in blue),Middle level (display indicator is in purple)andHigh level (display indicator is in red).
Seat Temp.
Press “Seat Temp.” key to adjust seat ring temperature.
Current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, temperature level will be switched, and proper temperature can be set.
When the key is pressed, display indicator is switched amongOff (display indicator is off),Low level (display indicator is in blue),Middle level (display indicator is in purple)
Warning
When a child, an old man, a patient, a person with poor skin or who moves slowly, or a person unable to adjust the temperature, or a person having drunken too much, is using this product, the accompanying person shall set air temperature to “Low level”. Do not use the product for a long time, or low temperature burning may occur.

Feminine

NOTE: Drawings may not exactly define contour of the product.

-22-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

Nozzle Clean
Press “Nozzle Clean” key.
The cleaner sticks out for manual wash. This function can only be used when the human body or other objects do not contact the seat ring sensing area. When the human body is sitting in place, press “Nozzle Clean key” to realize on/off of wash with air bubbles. This function can only be in wash mode.

Feminine

Night light
Press “Night light” key.
Night light will be on or off.
Position
Press “Position” key.
Position can be adjusted within five high or low levels.
Strength
To change wash strength, press “+” or “-” key.
Wash strength can be adjusted for 3 levels. For pressing each time, suitable water flow strength can be set.

Note
When water pressure is low, wash strength will be weak, and sometime water cannot be jetted out. At this time, increase wash strength. Please sit on the seat ring inwards, thus splashed water will be less.

NOTE: Drawings may not exactly define contour of the product.

-23-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

7. Knob and other operation

Feminine

Posterior

Powered on and seated, with front wash, reash wash and dryer functions off.
Turn the knob counterclockwise for auto front wash with default oscillating function.The entire process will consist of 4 mins front wash + 3 mins dryer+ flushing once while drying. During the front wash stage,Turn the button counterclockwise again will bring it to the drying stage.

Powered on and seated, with front wash, reash wash and dryer functions off.
Turn the knob clockwise for auto rear wash with default oscillating function.The entire process will consist of 4 mins rear wash + 3 mins dryer+ flushing once while drying. During the rear wash stage,Turn the button counterclockwise again will bring it to the drying stage.

Power/Stop
Powered off: press to flush; press and hold for 3s to power on. Powered on: press to stop functions; press and hold for 3s to power off when not seated; press and hold for 3s to start drying when seated.

Flush
Powered on with no functions running. Short press the knob to flush the toilet.

NOTE: Drawings may not exactly define contour of the product.

-24-

(+1) 312-626-9466 www.deervalleybath.com

Deodorization The function will operate automatically. Deodorizing fan automatically turns on after seating and turns off 3 minutes after leaving the seat.
Auto flush
Human body leaves the seat sensor area after seating. When the human body leaves the seat after seating, it will automatically flush once.
Kick to Flush Kick the “foot touch button”. to flush the toilet. Do not kick with force or high frequency.

Installation and Owner’s Manual

NOTE: Drawings may not exactly define contour of the product.

-25-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual
8. Battery Backup Installation
Take out the battery box, pry open the two sides of the clasp with a screwdriver, take out the battery box cover; Align the positive and negative terminals of the battery with the positive and negative terminals inside the battery box, and then install it into the battery box base.Cover the battery compartment cover tightly and lock the clips. Connect the connection cable of the battery box to the connection cable at the rear of the product and lock the nut. Please do not insert the battery and the connecting cable forcibly, otherwise it will cause damage to the product. If you have any questions, please call customer service.

Attention: Please confirm the positive and negative battery Do not charge, disassemble, burn, mix with old batteries or different types of batteries, so as not to cause leakage or explosion. The battery box has a moisture-proof function, please ensure that the fixing screws are screwed in place so as to achieve a good sealing effect Need to replace the battery recommended to contact professionals to replace.
User-friendly Design
Slow-closing lid/seat Preserve your toilet’s life and allows you to close the lid/seat silently. Damper The product has installed the damper which provide the toilet cover and toilet seat with a buffer function, to achieve the mute effect. 8 Layers of safety 8 different built-in safety features to protect the user and product. Memory mode After power failure, water temp, water pressure, seat temp, and wand position are all restored to mid-range after power failure. Night light is turned on by default after power failure. On / off, keep the last memorized setting state. Pre-flushing After seating, the product will flush once towards the seat to ensure that the seat wall is moistened.

NOTE: Drawings may not exactly define contour of the product.

-26-

(+1) 312-626-9466 www.deervalleybath.com

Specifications

(1) Product specifications

Power rating Frequency

Rated power input

Seat and dryer temperature range Source water temperature range

Water supply type

Water Inlet

Minimum pressure Maximum pressure

Toilet

Flush type Rough-in

Way for heating

Flushing

Temp pf warm water

Warm wind

Safety devices Warm wind temp
Wind speed

Seat ring

Safety devices Seat ring temp Safety devices

Remote control

Dimension Battery

Power cable length

Product dimension

Installation and Owner’s Manual
110V~120V 60Hz
1050W(When inlet water temp in 15) 39.4 °F~104 °F 39.4 °F~95 °F DN15(G1/2″)
25psi , ensuring a flow of water at least 18L/min 80psi (still)
Tornado flush Rough-in 12in Transient heating Off/about 93.2°F ~102.2°F(4 levels) Thermostat series, thermal fuse, flow detection device Off/about 95 °F ~131°F (4 levels) Above 4m/s (3 levels regulations) Bimetal thermostat series, thermal fuse Off/about 93.2 °F~104°F (4 levels) Thermal fuse 7.48in(L) 2.01in(W) 0.87in(H) Two AAA Batteries(Purchase required)
Appx. 59in
27.17 15.91in 18.43in

NOTE: Drawings may not exactly define contour of the product.

-27-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

(2) Function Table

Category
Cleansing
Comfort Human care
Safety

Function
Posterior (Rear cleaning) Feminine (Front cleaning)
Instant heating
Oscillating cleaning Hot & cold massage cleaning
Water pressure adjustment Water temperature adjustment
Nozzle position adjustment Self-cleaning nozzle
Antibacterial nozzle & seat cover Instant heating Seat heating
Seat ring temperature adjustment
Warm wind drying Warm wind temperature adjustment
Air-cleaning filter system
Soft close seat cover Electrostatic induction
Night Light Foot touch control flush
Remote control Automatic flush Flush with power failure Remote control flush Flushing water pressure Washing in advance Air isolation channel backflow prevention
Business mode Nano glaze
Eight-fold protection Self diagnosis
Prevent low temperature scald

NOTE: Drawings may not exactly define contour of the product.

-28-

(+1) 312-626-9466 www.deervalleybath.com

Installation and Owner’s Manual

(3) Regular maintenance
Regular maintenance is required to ensure normal use

Cut off the power and water supply before maintenance. Direct water wash to the entire product is prohibited.

WARNING
Do not spray water or detergents on the toilet, remote control orthe power cord. Doing so may cause electrick shock or fire.

Maintenance during Winter Season During winter season, the water inside may freeze after long periods of storage and non-usage. Please take measures to prevent.
Before connecting the product to the water supply and electrical outlet, allow it to defrost for 30 mins in a warm indoor environment. In cases of extreme cold/freezing/nozzle stuck in place, wrap the water input line with a warm towel. Never pour hot water or use a hot dryer directly on the toilet.

Maintenance of product surface and ceramics
Wipe dust or stains with a soft wet cloth A wet soft brush, cloth or sponge may be used to clean the ceramic area Do not use abrasive cleaning solutions, such as alcohol, bleach, paint thinner, cresol, benzene, gasoline, etc.

Maintenance of the nozzle
Powered on and not seated: Press the “Nozzle Clean” button on the remote controller, and the washer will automatically extend.If there is dirt in the nozzle orifice, If there is dirt in the nozzle orifice, you can gently hold the washer with one hand and clean it with a toothbrush with the other hand.
Do not use excessive force, otherwise it will damage the nozzle. When the nozzle is clogged, it is recommendedto replace it with a new one.

NOTE: Drawings may not exactly define contour of the product.

-29-

(+1) 312-626-9466 www.deervalleybath.com

(4) Problems & Solutions
Problems

Installation and Owner’s Manual

Problems
Check whether or not the Tee valve is blocked

The cleansing is always leaking

NOTE: Drawings may not exactly define contour of the product.

-30-

(+1) 312-626-9466 www.deervalleybath.com

Problems Problems Problems Problems

Installation and Owner’s Manual

Problems

NOTE: Drawings may not exactly define contour of the product.

-31-

(+1) 312-626-9466 www.deervalleybath.com

ONE YEAR LIMITED WARRANTY

Phone: (+1) 312-626-9466 Email: service@deervalleybath.com
Web: www.deervalleybath.com

LIMITED WARRANTY COVERAGE

1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product. In the case of any defects in materials or craftsmanship under regular use were inspected in the first one year of delivery, DeerValley will provide replacement parts at no charge, or at its option, replace any product or part of the product that is deemed defective, under normal installation, use, service and maintenance. This warranty applies only to the original purchaser. Proof of purchase will be required in the case of a claim. SCRATCHES ARE NOT COVERED UNDER WARRANTY.
The manufacturer warrants this product to be free of manufacture defects during the above mentioned warranty time. Please keep a copy of the original invoice as proof of purchase.
DeerValley will, as its option, (1) repair or replace the defective part(s) or product(s) at no charge; (2) issue a refund of the original purchase price of the product(s) (Valid within 30 days from the date of delivery); or (3) issue a credit to be applied toward the purchase of a new DeerValley product shipping/delivery charges may apply and are in DeerValley sole discretion.
DeerValley recommends the installations to be made by a licensed, professional plumber. DeerValley will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to use a licensed professional. DeerValley is not responsible for any removal or installation cost.
This limited warranty shall not apply to goods which have been subject to accident, negligence, improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty.
DeerValley responsibility under this limited warranty is limited to only to replacement parts and no other costs. DeerValley will not be responsible for labor charges and/or damage incurred by installation, repair or replacement, nor for any indirect incidental or consequential damages, losses, injury or costs of any nature relating to this product Except as provided by law, this limited warranty is in lieu of and excludes all other warranties, conditions, and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those merchantability of fitness for use.
RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage.

Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility.
In the event of a problem, the unit must not be installed. DeerValley is not responsible for failures or damage that could have been discovered, repaired, or avoided by proper inspection and testing prior to installation.
Damage occurring in transit is the responsibility of the carrier. The user or installer MUST open the crate and inspect the unit for damage when it is delivered. If damage is discovered, it must be reported immediately to the seller and the carrier in writing, and an inspection requested. Failure of the carrier to respond should be reported to the seller and the carrier. Your freight claims should be filed promptly thereafter.
LIMITATIONS AND EXCLUSIONS This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water ormineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of theproduct, or failure to follow care or installation instructions enclosed with your product. The warranty becomes invalid if the DeerValley product undergoes any alterations or if attempts are made to carry out repairs using unauthorized accessories or parts from DeerValley.
DeerValley will not be liable for loss of use of the DeerValley products, inconvenience, or any other incidental or consequential costs, expense or damages. Please note that some states do not allow the exclusion or limitation of incidental damages.
DISCLAIMER Except as expressly provided, there shall be no warranty or obligation, express or implied, oral or statutory. No dealer or other person has the authority to make any warranties or representations concerning DeerValley or its products. In no event shall DeerValley be held respon sible for any such warranties or representations.
WARRANTY SERVICE NOTE: When requesting warranty, be sure to have the following: ·Copy of original invoice ·Date of installation ·Description and pictures of defect ·Model number or description of model To obtain warranty service and replacement part, please contact DeerValley Customer Service. DeerValley will determine whether to repair or replace your product, issue a refund, or issue a credit.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals