Shenzhen Youxin Technology V5.0 True Wireless Earphone User Manual
- June 4, 2024
- Shenzhen Youxin Technology
Table of Contents
Shenzhen Youxin Technology V5.0 True Wireless Earphone
IDENTIFYING KEY PARTS
- LED Batitery Indicalor
- USB Interlace
- Charging Port
- EarWingsac
- Charging Contact
- Br-Tips
- Headphone Indicator Light
- Multi-function Button
Basic Parameters
- Model: Tws-24
- Version: 5.0 (EDA)
- Voice support: Chinese. Engish
- Connection Range : 10m
- Standby time: 40 hours
- Play music: 3-4 hours
- Operation Method: Touch button
- Battery type : lithium polymer 3.7V
- 80x capacity: 1000mAh
- Earphone capacity : 4OmAh
- Intorface type : TYPE-C
- Charging time: 1.5 hours
- Charging current DC 5V-100mA
- Color: Black, White, Grey
Usage
Power OnPower Of & Pairing
- Take the headphones out from 1he charging case, it will turn on automatically: Or, long press the Multi Function Buttons on both sides for about 5 seconds.
- Activate Bluetooth on your phone and set it to search for new devices TWS-24″.
To power off the device, put the headphones back to the charging case. or long press the Multi Function Buttons both sides for about 5 seconds.
Note: Please fully charge it with the charging case before the first use when you receive the product.
Touch Multi-function Button(MFB)
CALL
- Answer/End Call: Double press any Multi-Function Buton.
- Reject Call : Long press any Multi Funcion Button 1 or about 2 seconds
- Call in: Call in and broadcast the number.
Music
- play pause : Double press any Muli Function Button to play’ pause music. (Some phones may require you to start a media player lits).
- Next Track : Long press Muti Funcion Button (R) 1 or about 2 seconds
- Previous Trac : Long press Muti Function Button (L) for about 2 seconds.
Voice Assistant
Triple press any Multi-Function Button to active the voice assistant
Volume Control
- Short press Multi-Function Button (R) 1O volume up
- Short press Multi Funcion Button (L) to votumo down.
Other Function
Language switch In paired state, quick)y click 5 times (Do not connect to the phone) Automatic reconnection: automatically connect with period phone alter powor on (some phones need to be confirmed)
Guide to indicator lights for earphones
Hearing Safety
- To avoid hearing damage, do not listen for long úne at high volume.
- Do not turn the volume so high that you’re unable to hear your surroundings
- Please do not use earphones to listen to music while driving
Packing List
- Earphone x 2(Let & Right)
- Charging box x 1
- USB Cable 1
- Manual x 1
- Lanyards 1
- Eartips x 4 (Left & Right)
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction
FCC ID:2A5VZ-TWS-24
Because the earbuds is too small, the FCC ID number can only be printed on
the charging box.