LA CROSSE TECHNOLOGY 513-1419B Atomic Digital Wall Clock with Calendar and Indoor Temperature User Guide

: June 4, 2024
: LA CROSSE TECHNOLOGY

Table of Contents

Power Up
Settings Menu
Custom Display
Low Battery Indicator
Specifications
Care + Maintenance
Warranty
FCC Statment
Documents / Resources

ATOMIC DIGITAL WALL CLOCK
WITH CALENDAR & INDOOR TEMPERATURE
MODEL: 513-1419B
SET UP GUIDE

Power Up

Insert 2-AA batteries Into your Atomic Clock.
Enter the Settings Menu to adjust your time and date and other settings.

Atomic Time

The clock will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
The Atomic Time Signal Icon will flash while searching and be solid when it has connected.
From the normal time display, hold the – (MINUS) button to manually start or stop a search for the atomic time signal. For information about Atomic Time (WWVB) visit: bit.ly/AtomicTime.

Hold the MODE button to enter the Settings Menu.
Use the + / – buttons to adjust values.
Press the MODE button to confirm and move to the next item.
Press the SNOOZE button at any time to exit.

Settings Menu Order:

Language (English or Spanish)
Beep ON/OFF
Atomic ON/OFF
Time Zone
Daylight Saving Time (DST) ON/OFF
12/24 Hour
Hour
Minutes
Year
Month
Date
Fahrenheit/Celsius

TIME ZONE
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
Language: Whichever language is selected, the following instructions as well as your weekday and month abbreviation will be presented in that language.
Atomic OFF: When Atomic OFF is selected, you will move directly to the 12/24 Hour setting. This will stop all Atomic Time searches and require manual time adjustments.
Weekday: The Weekday will be set automatically when the Year, Month, and Date are set.

Custom Display

Press the MODE button to change the clock display:
Top: Weekday/Month/Date or Full Weekday
Lower right section: Indoor Temperature, or Seconds, or Month/Date

Time Alarm
Set Alarm:

Hold the ALARM button to enter the Alarm Settings. “AL” will show.
Use the +/- buttons to adjust values.
Press the ALARM button to confirm and move to the next item.

Silence a Sounding Alarm:
Press any button except SNOOZE to silence the alarm for 24 hours.
Activate/Deactivate Alarm:

Hold the ALARM button to enter alarm settings. “AL” will show. Press the ALARM button to activate or deactivate the alarm.
The Alarm Icon will show when the alarm is active.

Snooze:

When the alarm sounds, press the SNOOZE button to silence the alarm for 10 minutes. Zz will show.

Note: The alarm will sound with increasing frequency for two minutes, then shut off automatically if not silenced.

Low Battery Indicator

The Low Battery Indicator will show between the hour and minutes when you need to replace the batteries.

We’re Here to Help
For detailed product videos, manuals, and more, visit our website: bit.ly/513-1419b_support

https://bit.ly/513-1419b_support

If you require additional support, get in touch with our friendly customer support team based in La Crosse, WI.
Phone: 1.608.782.1610
Online: bit.ly/contact_techsupport
Our knowledgable customer support team is available: Mon-Fri 8 am-6 pm CST.
Make sure to have your model number handy (513-1419B).

Specifications

Temperature Range: +32°F to 99°F (0°C to 37°C)
Update Interval: About every 60 seconds
Power: 2 “AA” (LR6, IEC) batteries (not included)
Battery Life: Over 24 months
Dimensions: 9.84” L x 1.14” W x 7.48” H (25 cm L x 2.9 cm W x 19 cm H)

Care + Maintenance

Battery Replacement Instructions
When batteries of different brands or types are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

Always purchase the correct size and grade of battery most suitable for the intended use.
Always replace the whole set of batteries at one time, taking care not to mix old and new ones or batteries of different types.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from the product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
Remove used batteries promptly.
For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.

Warranty

La Crosse Technology, Ltd. provides a 1-year limited-time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty

Califonia Residents
WARNING:
This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer.
For more information, go to: www.P65Warnings.ca.gov
Stay in Touch
Ask questions, watch setup videos, and provide feedback on our social media outlets.

FCC Statment

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
All rights reserved.
This manual may not be reproduced in any form, even in part, or duplicated or processed using an electronic, mechanical, or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error or its consequences. All trademarks and patents are recognized.
Canada Statment
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Designed in La Crosse, Wisconsin
Made in China
Printed in China
DC 102721

Documents / Resources

| LA CROSSE TECHNOLOGY 513-1419B Atomic Digital Wall Clock with Calendar and Indoor Temperature [pdf] User Guide
513-1419B, Atomic Digital Wall Clock with Calendar and Indoor Temperature, 513-1419B Atomic Digital Wall Clock with Calendar and Indoor Temperature
---|---