BARNES4WD B4W188946WP Bronco Rear Axle Shock Skid Plate Installation Guide
- May 15, 2024
- BARNES4WD
Table of Contents
BARNES4WD B4W188946WP Bronco Rear Axle Shock Skid Plate
Specifications
- Product: Bronco Rear Axle Shock Skid Plate
- Material: Welded and Powder Coated Steel
- Hardware: Grade 8 Yellow Zinc and Yellow Zinc Coated
Thank you for purchasing our Bronco Rear Axle Shock Skid Plate!
Installation Notes:
- These skids are designed to fit a 2021-Current Bronco
- These Skids will not fit a Bronco Sport
- Refer to your factory service manual for the removal of any factory components.
Tools Required
- 1 x B4W188946WP (Bronco Rear Shock Skid Driver)
- 1 x B4W188947WP (Bronco Rear Shock Skid Passenger)
- 4 x 94945A217 (3/8-16X7/8 Hex Bolt Grade 8 Yellow)
- 4 x 92620A623 (3/8-16 Thin Nylock Yellow)
- 4 x 37NWSAFY (3/8 SAE Washer Yellow Zinc)
- 2 x 25C87HCS8Y (1/4-20 X 7/8 HHCS Grade 8 Zinc Yellow)
- 2 x 25CNNE0Y/GC (1/4-20 Nylock Yellow)
- 4 x 25NWSAFY (1/4 SAE Flat Washer Yellow)
Contents of each box
| Bill Of Materials for B4WK12702 | |
|---|---|
| QTY | Part Number |
| 1 | B4W188946WP |
| 1 | B4W188947WP |
| 4 | 94945A217 |
| 4 | 92620A623 |
| 4 | 37NWSAFY |
| 2 | 25C87HCS8Y |
| 2 | 25CNNE0Y/GC |
| 4 | 25NWSAFY |
- Bronco Rear Shock Skid Driver Welded and Powder Coated
- Bronco Rear Shock Skid Passenger Welded and Powder Coated
Installation Steps
- Step 1:
- Park the Bronco on a level surface.
- Step 2:
- Place the Barnes4wd shock skid on the rear shock bracket as shown below.
- Step 3:
- Install the supplied hardware into the shock skid as shown below.
- Step 4:
- Tighten all hardware installed in step 3. Torque all 1/4 hardware to 8 Ft-Lbs and all 3/8 hardware to 20 Ft-Lbs.
- Step 5:
- Repeat steps 2 through 4 on the opposite side of the Bronco.
Congratulations! You have finished the installation of the Barnes4wd Bronco Rear Shock Skid Plates.
Professional Services Disclaimer
The content of all pages of this website (collectively, the “Website”), such
as text, graphics, images, information, and other material (collectively,
“Content”) is for informational purposes only. Any information furnished on
this Website is not intended nor implied to be automotive advice and is not
intended to replace personal consultation with a qualified automotive service
technician, mechanic, or similar automotive professional. Barnes 4WD has not
examined the Content for accuracy, timeliness, completeness, appropriateness,
or helpfulness. Barnes 4WD does not endorse any specific tests, products,
procedures, opinions, or other information that may be mentioned on this
Website. Your reliance upon information and Content obtained by you at or
through this Website is solely at your own risk.
IN NO EVENT SHALL BARNES 4WD BE LIABLE OR OTHERWISE RESPONSIBLE FOR ANY DAMAGE OR INJURY (INCLUDING DEATH) TO YOU, OTHER PERSONS, OR PROPERTY ARISING FROM ANY USE OF ANY PRODUCT, INFORMATION, IDEA, OR INSTRUCTION CONTAINED IN THE CONTENT. BARNES 4WD DOES NOT MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, AT LAW OR IN EQUITY, FOR ANY PRODUCT FEATURED ON THE WEBSITE, INCLUDING WITHOUT LIMITATION FOR MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, VALUE, VALIDITY, OR ENFORCEABILITY, AND ANY AND ALL SUCH OTHER REPRESENTATIONS OR WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED
FAQ
Frequently Asked Questions
- Q: What should I do if I encounter any issues during installation?
- A: If you encounter any issues during installation, please refer to the user manual for troubleshooting steps or contact our customer support for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>