BARNES4WD B4WK12629 Axis Bed Rack Traction Board Mounts Installation Guide
- May 15, 2024
- BARNES4WD
Table of Contents
BARNES4WD B4WK12629 Axis Bed Rack Traction Board Mounts
Installation Instructions
Thank you for purchasing our Barnes4wd Axis Bed Rack Traction Board Mounts!
Installation Notes
- All Hardware is stainless steel to prevent corrosion. Hardware will need to be installed by hand with anti-seize to prevent galling.
- While installing leave all hardware loose until the final step.
- This Bracket is designed to fit Maxtrax or similar traction boards.
- The mount is designed to use a pin-style traction board mount (Maxtrax SKU MTXMPS or similar).
- These instructions assume that the base rack and the side panels have been installed.
- Some of the hardware in the previous instructions may need to be loosened or removed during installation.
- Torque all 3/8” hardware to 19 Ft-Lbs.
Tools required:
- 9/16” Wrench
- 7/32” Allen Socket
- 3/8” Driver Ratchet
- Anti-seize
Contents of box
Bill of Materials for B4WK12629 Bed Rack Traction Board Mount Prepack
QTY| Part Number| Description
2| B4W125036P| Bed Rack Traction Board Mount Powder Coated
4| 37C100KBCS| 3/8”-16 X 1” Button Head Cap Screw Stainless
4| 37CNNES| 3/8”-16 Stainless Nylock Nut
4| 37NWUSS| 3/8” USS Flat Washer Stainless
Step 1:
Install the Barnes4wd traction board mount on the side panels as shown below
.
Step 2:
Install the pin-style traction board mount into the traction board mounts.
Step 3:
Install the traction boards on the mounts to get the correct spacing of the
mounting brackets. Remove the boards and tighten the hardware.
Congratulations! You Have finished the installation of the Barnes4wd Axis Bed
Rack Traction Board Mount
Professional Services Disclaimer
The content of all pages of this website (collectively, the “Website”), such
as text, graphics, images, information and other material (collectively,
“Content”) is for informational purposes only. Any information furnished on
this Website is not intended nor implied to be automotive advice and is not
intended to replace personal consultation with a qualified automotive service
technician, mechanic, or similar automotive professional. Barnes 4WD has not
examined the Content for accuracy, timeliness, completeness, appropriateness,
or helpfulness. Barnes 4WD does not endorse any specific tests, products,
procedures, opinions, or other information that may be mentioned on this
Website. Your reliance upon information and Content obtained by you at or
through this Website is solely at your own risk.
IN NO EVENT SHALL BARNES 4WD BE LIABLE OR OTHERWISE RESPONSIBLE FOR ANY DAMAGE OR INJURY (INCLUDING DEATH) TO YOU, OTHER PERSONS, OR PROPERTY ARISING FROM ANY USE OF ANY PRODUCT, INFORMATION, IDEA, OR INSTRUCTION CONTAINED IN THE CONTENT.BARNES 4WD DOES NOT MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, AT LAW OR IN EQUITY, CONCERNING ANY PRODUCT FEATURED ON THE WEBSITE, INCLUDING WITHOUT LIMITATION FOR MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, VALUE, VALIDITY, OR ENFORCEABILITY, AND ANY AND ALL SUCH OTHER REPRESENTATIONS OR WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>