BARNES4WD B4WK12699P Bronco A Arm Skid Plate Installation Guide
- June 15, 2024
- BARNES4WD
Table of Contents
Bronco A Arm Skid Plate
Installation Instructions
B4WK12699P Bronco A Arm Skid Plate
Thank you for purchasing our Bronco A Arm Skid Plate!
Installation Notes:
- The skids are designed to fit a 2021-Current Bronco
- The skids will not work on a Bronco Sport
- Please refer to the factory service manual for removal of any factory components
Tools required:
- Ratchet
- 9/16 Socket
- 18MM Socket
Contents of box
Bill Of Materials for B4WK12701D
| QT | Part Number | Description |
|---|---|---|
| 1 | B4WK12699P | Bronco A Arm Skid Plate Weldment Driver Powder Coated |
| 1 | B4WK12700P | Bronco A Arm Skid Plate Weldment Passenger Powder Coated |
| 1 | B4W188933P | Bronco A Arm Skid Passenger Mount Powder Coated |
| 1 | B4W188969P | Bronco A Arm Skid Driver Mount Powder Coated |
| 4 | 37C100BCG8Y | 3/8″-16 x 1″ Carriage Head Bolt Grade 8 Yellow Zinc |
| 4 | 37CNNE0Y/GC | 3/8-16 Nylock Yellow |
| 4 | 37NWSAFY | 3/8 SAE Washer Yellow Zinc |
Step 1:
Park the Bronco on a level surface and remove the 2 lower shock stud nuts.
Step 2:
Install the skid mount on top of the A arm as shown below. The longer leg of
the mount should go towards the front of the vehicle.
Step 3: Install the A arm skid to the A arm as shown below.
Step 4: Reinstall the factory hardware removed in step 1 as well as the
supplied carriage hardware. Tighten hardware to factory torque specs.
Step 5: Repeat steps 1 through 4 on the opposite side of the Bronco.
Congratulations! You Have finished the installation of the Barnes4wd Bronco A Arm Skid Plates
Professional Services Disclaimer:
The content of all pages of this website (collectively, the “Website”), such
as text, graphics, images, information and other material (collectively,
“Content”) is for informational purposes only. Any information furnished on
this Website is not intended nor implied to be automotive advice and is not
intended to replace personal consultation with a qualified automotive service
technician, mechanic, or similar automotive professional.
Barnes 4WD has not examined the Content for accuracy, timeliness,
completeness, appropriateness, or helpfulness. Barnes 4WD does not endorse any
specific tests, products, procedures, opinions, or other information that may
be mentioned on this Website. Your reliance upon information and Content
obtained by you at or through this Website is solely at your own risk. IN NO
EVENT SHALL BARNES 4WD BE LIABLE OR OTHERWISE RESPONSIBLE FOR ANY DAMAGE OR
INJURY (INCLUDING DEATH) TO YOU, OTHER PERSONS, OR PROPERTY ARISING FROM ANY
USE OF ANY PRODUCT, INFORMATION, IDEA, OR INSTRUCTION CONTAINED IN THE
CONTENT.
BARNES 4WD DOES NOT MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,
AT LAW OR IN EQUITY, WITH RESPECT TO ANY PRODUCT FEATURED ON THE WEBSITE,
INCLUDING WITHOUT LIMITATION WITH RESPECT TO MERCHANTABILITY, FITNESS FOR ANY
PARTICULAR PURPOSE, VALUE, VALIDITY, OR ENFORCEABILITY, AND ANY AND ALL SUCH
OTHER REPRESENTATIONS OR WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>