Arcade SP37726 Panier de Basket Ball User Manual

Arcade SP37726 Panier de Basket Ball

Arcade Basketball Hoop

• Model: SP37726
• Dimensions: 22595440mm, 22685mm, 22885mm, 22756340mm, 22823mm, 22835mm, 22590mm, 22710395mm, 22635520mm, 13625mm
• Includes: Basketball, Electronic Scorer, Switch Sensor, Face Plate, Backboard, Inflation Pump, Rim, Rim Support Plate with Needle, Ball Return Net, M6 Washer, Bolts, Nuts, Wrench, Allen Key

Specifications

• Dimensions: Various sizes as per the parts list
• Material: Plastic and Metal
• Recommended Age: 10+
• Assembly Required: Yes

Product Usage Instructions

Assembly Instructions

1. Find a clean, level surface to begin the assembly.
2. Work with another adult for assembly.
3. Verify all parts as per the Parts list page.
4. Cut or tear the box for a work surface.

Before Assembly

Inspect and layout all Poles and parts.

Step-by-Step Assembly

1. Attach Tubes 2 to Tube 3 and Tube 4 using spring locks.
2. Attach Tubes 7 to Tubes 8 using spring locks.
3. Attach Tube 5 and Tube 6 using spring locks.
4. Attach Tube 5 and Tube 6 to Tube 3 and Tube 4 using Bolts, Washers, and Nuts.
5. Attach Tube 5 and Tube 6 to Tubes 8 using Bolts, Washers, and nuts.
6. Attach Tubes 7 and Tubes 8 to Tube 2 using Bolt, Washers, and Nuts.
7. Attach Tube 12 to Tube 2 using Bolts, Washers, and Nuts.
8. Insert Tubes 1 onto Tubes 2.
9. Attach Tubes 9 to Tube 5 and Tube 6 using Bolts, Washers, and Nuts.
10. Attach Tubes 10 to Tubes 9 using spring locks, then insert Tube 11 onto Tubes 10 using spring locks.

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PARTS

ASSEMBLY INSTRUCTIONS

1. Find a clean, level surface to begin the assembly of your Basketball Game. We recommend that two adults work together to assemble this basketball game.

2. Remove all the parts from the box and verify you have all of the listed parts as shown on the Parts list page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
   BEFORE ASSEMBLY
   Please inspect and lay out all your Poles and parts

3. Attach Tubes 2 (#2) to Tube 3 and Tube 4 (#3 & #4) using spring lock (pre-installed) as shown in FIG.1.

4. Attach Tubes 7 (#7) to Tubes 8 (#8) using spring lock (pre-installed) as shown in FIG.2

5. Attach Tube 5 and Tube 6 (#5 & #6) using a spring lock (pre-installed) as shown in FIG.3.

6. Attach Tube 5 and Tube 6 (#5 & #6) to Tube 3 and Tube 4 (#3 & #4) using Bolts (#27), Washers (#22) and Nuts (#28), and then attach Tube 5 and Tube 6 (#5 & #6) to Tubes 8 (#8) using Bolts (#27), Washers (#22) and Nuts (#28) as shown in FIG. 4, 4A and 4B.

7. Attach Tubes 7 and Tubes 8 (#7 & #8) to Tube 2 (#2) using Bolt (#24), Washers (#22), and Nuts (#28) as shown in FIG.4C, repeat this step for the other side. NOTE: Make sure the spring lock is facing down.

8. Attach Tube 12 (#12) to Tubes 2 (#2) using Bolts (#24), Washers(#22) and Nuts (#28) as shown in Fig. 5A, and then insert Tubes 1(#1) onto Tubes 2 (#2) as shown in FIG. 5.

9. Attach Tubes 9 (#9) to Tube 5 and Tube 6 (#5 & #6) using Bolt(#25), Washers (#22) and Nuts (#28) as shown in FIG.5B.

10. Attach Tubes 10 (#10) to Tubes 9 (#9) using spring locks (pre-installed), and then insert Tube 11 (#11) onto Tubes 10 (#10) using spring locks (pre-installed) as shown in FIG.6.

11. Attach Rims (# 18) and Rim Support Plates (#19) to the Backboard (#17) using the Bolts (#23), Washers (#22) and Nuts (#28). Attach the Switch Sensors (#15) to the Backboard (#17) using the Bolts (#23), Washers (#22) and Nuts (#28).NOTE: Make sure that you use a washer on both sides of the backboard as shown in FIG. 7.

12. Attach the Electronic Scorer Face Plate (# 16) to the front of the Backboard and connect with the Electronic Scorer (#14)using Bolts (#29) as shown in FIG.8.

13. Slide elastic straps and sleeve of Ball Return Net (#21) onto Top Tubes 1 (#1) as shown in FIG.9A & 9B.

14. Slide Tube 12 (#12) through the sleeve on the front of the Ball Return Net (#21), and attach the left side first using Bolts (#24), Washers (#22), and Nuts (#28) as shown in FIG. 9C. Follow the same procedure on the right side.

15. With the help of another adult, attach the Backboard (#17) to Top Tubes 1 (#1) using Bolts (#26), Washers (#22),and Nuts (#28) as shown in FIG.10A. At each bottom hole of the backboard, attach the ramp tabs of Ball Return Net (#21) using Bolts (#26), Washers (#22), Nuts (#28) as shown in FIG.10B.

16. Connect the Lock Pins (#A4) to Tube 5 and Tube 6 (#5 & #6) and insert them into Tube 5 and Tube 6 (#5 & #6) as shown in FIG.10C.

17. Connect the Sensor Wire from the Switch Sensor (#15) to the Electronic Scorer (#14) as shown in FIG.11.Connect the Control Wire to the Electronic Scorer (#14) as shown in FIG.11 and 11A.

18. To fold the game up when not in use, remove Lock Pins (#A4), fold the front of the basketball game up, and re-insert Lock Pins (#A4) as shown in FIG.12. Note: The Lock Pins need to be removed before folding closed or open.

ELECTRONIC SCORER OPERATION

Installing Batteries

• Using a screwdriver, unscrew the lid and open the battery box. Insert 3
• “AA” batteries ( not included)in the order of polarity as shown on the inside cover. Close the cover and tighten the screw.
• Turn the power ON using the ON/OFF switch.

Reminders

• Batteries must be installed according to the correct polarization (+ and -) requirement.
• Please clean the battery contacts, and also those of the device, before battery installation.
• If the game will not be used for a long period, we recommend that the batteries should be removed.

WARNING:

1. Requires 3 “AA” batteries (not included).
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

How to play

• Turn the power ON using the ON/OFF switch. The LED scorer shows a playing time of 60 seconds.
• The first player shoots in 60 seconds to score a point. The second player starts in 60 seconds.
• The player with the most points scored wins (LED will flash on the player with higher scores).

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
• In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
• Take a photo of the box markings.
• A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
• Take a photo of the damaged part (if applicable).
• A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
• Send us an email with the images requested.
• Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

FAQ

Frequently Asked Questions

• Q: Is assembly required for the Arcade Basketball Hoop?
  • A: Yes, assembly is required. Please refer to the provided instructions for step-by-step guidance.
• Q: What age group is this product suitable for?
  • A: The product is recommended for ages 10 and above.
• Q: What is included in the package?
  • A: The package includes the basketball hoop components, basketball, electronic scorer, inflation pump, and necessary hardware for assembly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>