STEP2 4301KR Roadster Toddler to Twin Bed Instruction Manual
- October 30, 2023
- Step2
Table of Contents
4301KR Roadster Toddler to Twin Bed
Product Information:
Product Name: Roadster Toddler-to-Twin BedTM
Manufacturer: The Step2 Company, LLC
Manufacturer Address: 10010 Aurora-Hudson Rd. Streetsboro, OH 44241 USA
Contact Number: 1-800-347-8372 (USA & Canada only), (330)656-0440
Website: www.step2.com
Product Usage Instructions:
- This product is intended for use by children aged 2 years and up.
- Before each use, inspect the product and tightly secure connections. Replace damaged or worn components. Contact the Step2 Company for replacement parts.
- Always follow the assembly instructions provided in the manual. Adult assembly is required.
- Small parts and sharp points are present before assembly, which may cause choking hazards. Therefore, keep them away from children.
- Do not use items such as hood strings or pacifier cords around a child’s neck as they may catch on bed parts and cause serious or fatal injury.
- Dispose of the product in compliance with all government regulations. When possible, please recycle.
INTENDED FOR USE BY CHILDREN FROM AGES 2 YEARS AND UP.
OBSERVE THE FOLLOWING STATEMENTS AND WARNINGS TO REDUCE THE LIKELIHOOD OF
SERIOUS OR FATAL INJURY.
WARNING:
INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT.
- Openings in and between bed parts can entrap head and neck of a small child.
- NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions.
WARNING:
STRANGULATION HAZARD
- NEVER place bed near windows where cords from blinds or drapes may strangle child.
- NEVER suspend strings over bed.
- NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords, around a child’s neck. These items may catch on bed parts.
CLEANING INSTRUCTIONS:
General Cleaning:
Use a 50/50 mixture of white vinegar and water.
DECAL APPLICATION:
Clean and dry area thoroughly. Center decal in area. Apply pressure from
center to outer edge.
DISPOSAL INSTRUCTIONS:
Please recycle when possible. Disposal must be in compliance with all
government regulations.
INSTALLATION
- Requires two people to assemble.
- Adult supervision is required.
- Maximum weight-Toddler Bed: 50 lbs.
- Maximum weight-Twin Bed: 200 lbs. Twin Bed uses standard twin mattress size: 38 in (96,52 cm) x 74-1/2 in (189,23 cm) x 7 in (17,78 cm) not included.
- ALWAYS follow dimensions for Toddler mattress size.
- DO NOT use a water bed or a foam mattress.
- AVOID ENTRAPMENT HAZARDS! DO NOT place Toddler Bed against a wall unless the gap between the bed and wall is less than 3 inches.
- Instruct children not to use the product until properly assembled.
- DO NOT remove any screws once installed. For disassembly, only remove bolts as instructed.
- DO NOT over-tighten screws or they will not hold parts together appropriately.
- Take notice that screws are designed to pierce the plastic and form their own threads.
INSPECT THIS PRODUCT BEFORE EACH USE. TIGHTLY SECURE CONNECTIONS AND REPLACE DAMAGED OR WORN COMPONENTS. CONTACT THE STEP2 COMPANY FOR REPLACEMENT PARTS.
TOOLS REQUIRED
PLEASE NOTE: Product has no holes. Screws form their own. Apply pressure. Scan QR code for screw installation tips.
Decal Application:
1-6: Use hex key to drive Stafast Insert™ flush with plastic ONLY at pictured locations.
INSTALLATION INSTRUCTIONS
NOTE: Parts L, K, M, and J are only for Twin bed. Box 2 can be used to store these parts until needed.
TODDLER BED
TWIN BED:
If bed is set up as a toddler, disassemble it from step 22 – 16, setting aside bolts and washers.
The Step2 Company, LLC.
10010 Aurora-Hudson Rd.
Streetsboro, OH 44241 USA
1-800-347-8372 USA & Canada Only
(330)656-0440
www.step2.com
References
- Kids Toys, Playhouses, Wagons & Outdoor Toys | Step2
- Assembly is easy with these video tips & tricks!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>